Another wiring question.. what feeds the rev counter? [Archive]

c7borg

21-04-2009, 16:31

is it a wire from the ignition module?

Mart

21-04-2009, 19:16

Yep, it's one of the wires (can't remember which one now...pink maybe?) on the 3-way plug/connector.

bye_all_c_ya

21-04-2009, 19:21

gray
as im having trouble and i think it feeds large black plug over the rev gauge and cable slot no.8 i think may change to a brown wire

Rob@Backyardracing

21-04-2009, 20:59

The pink wire from the aei 3 pin plug.....letter C i think... ive seen these wires fade on some GTs but normaly its pink... the other two wires are 12v and earth so maybe use a tester if your colours are odd....

Rob@Backyardracing

21-04-2009, 21:01

http://www.rtoc.org/files/Technical%20Files/Scoff/aei.jpg

Chris Hebden

21-04-2009, 21:03

http://www.rtoc.org/files/Technical%20Files/Scoff/aei.jpg

Nice find, will help me out alot :agree:, thanks!

J$£5GTT

21-04-2009, 22:22

http://www.rtoc.org/files/Technical%20Files/Scoff/aei.jpg

where would you wire in a rev limiter there??

:)

Kris M

21-04-2009, 22:27

J, the rev limiter connects to the positive and negative outputs on the coil ( IIRC)

They are two metal pegs on the side of the AEI, only one is just visible in the pic, just below and left of the supresser connection. To expose the other metal peg you have to cut away some of the plastic surround :) The limiter wires then slip nicely over the pegs once if they have female bullet connecters on them ( This it was Mart who suggested this originally, works well ;))

J$£5GTT

21-04-2009, 22:31

J, the rev limiter connects to the positive and negative outputs on the coil ( IIRC)

They are two metal pegs on the side of the AEI, only one is just visible in the pic, just below and left of the supresser connection. To expose the other metal peg you have to cut away some of the plastic surround :) The limiter wires then slip nicely over the pegs once if they have female bullet connecters on them ( This it was Mart who suggested this originally, works well ;))

cheers mate you just got yourself a wiring job..

DONE!!!

:agree:

THE MASTER

21-04-2009, 22:45

simpl;e innit

the three way plug has three wires . one is earth thats gotta be the black one
that just leaves two
so if the yellow wire is B+ with ign on that only leaves one

last one standing

anyone fancy a game of cludo
i recon it was pro plumb in the studdy with the lead pipe
:p