carb bits

[alex-r5]

New poster! (less than 10 posts)

has any one got a website or number were i can get some carb bits

120 main
0.9mm air corrector
1.4mm 2nd stage bush

plus ive rebuilt my carb following the guide of the old web site ,and changed the main jet so i know were that is, but not sure about the outher two is the air corrector the small jet on the top of the bottom half when you open it up?,and i havent got a clue about the 2nd stage bush., any pick, info would be a great help :)

[Northerner]

Try ktec for the main jet and air corrector.

The 2nd stage is a fixed bush which needs to be drilled insitu.

[Brigsy]

Southern carbs should be able to supply you with the main & a/c jet. Or buy a micro drill set & drill/solder your own.

[5teve L]

New poster! (less than 10 posts)

has any one got a website or number were i can get some carb bits

120 main
0.9mm air corrector
1.4mm 2nd stage bush

plus ive rebuilt my carb following the guide of the old web site ,and changed the main jet so i know were that is, but not sure about the outher two is the air corrector the small jet on the top of the bottom half when you open it up?,and i havent got a clue about the 2nd stage bush., any pick, info would be a great help :)


Articles section at the top works you know ;)

http://www.rtoc.org/boards/showthread.php?t=460