driveshafts/inners/outers [Archive]

J$£5GTT

13-04-2009, 11:59

if i needed to graft to different driveshafts together,inners
from one car an outers from another,where would i have
it done?
cheers
J

Sparkie

13-04-2009, 18:59

the inners are easy... a circlip plier and a puller.

J$£5GTT

13-04-2009, 19:07

i dont mean 5 driveshafts as a whole,i mean an inner from another
source grafted to a 5 outer say...
where would i get that done?
:)

Scoff

13-04-2009, 19:20

All CV's will come off the shaft, including the renault ones. Renault ones are on a spline pressed on. Others like VW are on a spline with a circlip, etc. The proffesional would go to a driveshaft place and have a new shaft made at the correct length with the right splines. If you're a poor sod like me then you weld 2 shafts together (with caution mind, it has to be done properly).

J$£5GTT

13-04-2009, 19:28

All CV's will come off the shaft, including the renault ones. Renault ones are on a spline pressed on. Others like VW are on a spline with a circlip, etc. The proffesional would go to a driveshaft place and have a new shaft made at the correct length with the right splines. If you're a poor sod like me then you weld 2 shafts together (with caution mind, it has to be done properly).

thanking you commander
:agree::cool: