View Full Version : Breather hose sizes.
What size breather hoses should i use on the c1j? i have used 10mm alloy for now but im concerned its too small..
Penfold aka The Dealer
10-04-2009, 18:11
My cup car has PMT bodge with Garden hose:eek:.... that will be going me thinks.:)
scratcher
10-04-2009, 18:28
I'm pretty sure they should be 16mm id.
Aye i have the asi hoses in front of me they look to be at least 16mm i.d. Im going to make a pmt breather set up using the original seperator & bin the alloy pipe.
scratcher
10-04-2009, 18:40
Good plan. Thats what I've done too. It only took 2 hoses out of the kit with no chopping.
Freeman13
10-04-2009, 18:58
whats the pmt breather set up??
jantheeven
11-04-2009, 08:26
...and what does PMT stand for? :ashamed: :D :sad2:
ive just run mine straight out the rocker cover with 15 plumbers pipe and that fitted into the oe elbow off the rocker top. so 16mm would be about right.
whats the pmt breather set up??
its a case of running the breather system out the rocker cover into a seperate catch tank rather that returning it back to sump. and the catch tank is not a bling one its normally a lucazade bottle or a pepsi bottle ect
scratcher
11-04-2009, 10:15
I kept the swirl pot so some still goes back to the sump and a bit goes to the tank.
http://i59.photobucket.com/albums/g319/pimpscratcher/SDC12202.jpg
I kept the swirl pot so some still goes back to the sump and a bit goes to the tank.
http://i59.photobucket.com/albums/g319/pimpscratcher/SDC12202.jpg
have you emptied that bottle yet
scratcher
11-04-2009, 10:21
I checked it out and it wasn't full, it was just the bit of oil in the breather on top.
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.