breather system that goes to telephone hose

[gttjames]

Was thinking of geting a 45deg bend bit of silicone hose so the air filter sits where the oe intercooler sits (ill need 60mm silicone hose right???), but obviously this wont have the hole for the breather system (iv seen people put a little filter there, what size?) and what effect will this mod have on the breather system/running?

thanks

[smithsgtt]

just put a small filter on the end

[Ashy]

I'd always route breathers to a catch tank or back into the telephone hose. I found my engine was breathing quite heavily and the fumes were getting ino the cabin so I ditched the catch tank and routed the breathers back to the telephone hose.

I wouldn't use a small filter as its just venting straight into your engine bay.

If you get an OE boost hose the one between the intercooler and carb you can remove the anti perc outlet (a brass fitting) Then cut a small hole in your 60mm 90 degree silicon bend and put the fitting into it and run the breather to it.

I'll put a pic up of mine, works really well and no nasty whiffs in the cabin :)