Fly wheel

[Harrison01]

well i took my fly wheel off and decided to take it into work over sat and sun so that i could lighten it on the lathe. i was able to spend all weekend on as we had nothing to do anyway. the weight of the flywheel before i started was 6.6kg and i was able to get it down to 5.2kg. didnt fancy going any lower than that. god knows how they can take 30% off without weakening it.

heres a couple of pics including a tool i used so could clean the clutch plate face.

[scratcher]

Looking fresh mate :niceone:

[J$£5GTT]

so fly
:cartman:

[Adam L]

If you ever see the CTM (Big Jim) flywheel's, you'll notice that they mill out slots around the outer face of the flywheel. I did an accurate weight gauge this morning with my hands, against a stock flywheel, and it's certainly noticable.

[James5]

If you ever see the CTM (Big Jim) flywheel's, you'll notice that they mill out slots around the outer face of the flywheel. I did an accurate weight gauge this morning with my hands, against a stock flywheel, and it's certainly noticable.


Here's Scoff's old CTM jobby, i had the same flywheel on my old C1J lump
http://www.rtoc.org/files/?path=Technical%20Files/Scoff/C1J-lightened-flywheel/

[Adam L]

That's the same 9 slot flywheel I have, although I mailed it out today to get some work done to it.

[Rob@Backyardracing]

Nice fly wheels the 9 slot.. do feel alot lighter... :)

[Winston]

9 slot porn :eek: