PDA

View Full Version : beavers sills



gtmatt
28-02-2009, 13:13
has any one bought sills (outers) from beaversauto panels ?? they a good copie fit ? also which ones do i order off the site ?? dont understand the year numbers is this the correct one renault r5 2/85-1/93 ??
what does with plate mean as well thanks matt:)

michael tierney
28-02-2009, 16:47
the year is correct and the plate means a bit extra comes with the sill at the rear,just where your decal is.i got 2 and i had to order them by phone!

dangerous dave
28-02-2009, 18:10
they are spot on, saves alot of hassle in most cases.. my rot was off up the rear quarter near the sticker so the extra metal sorted it right out.. i only did the rear 1/2 so have the other half in the garage for later use:)

gtmatt
28-02-2009, 18:12
thanks guys will order some then:)

dangerous dave
28-02-2009, 18:16
thanks guys will order some then:)

getting the welding done on my 5 was the best money i ever spent... Mots are never a problem as i can sort anything in a day or two if it fails.. when they fail for welding you just want to burn it out:(

gtmatt
28-02-2009, 18:17
do they come with the pins to put the side skirt clips on ?? if not how does the kit clip on ??:)

Alastair
28-02-2009, 18:42
do they come with the pins to put the side skirt clips on ?? if not how does the kit clip on ??:)

Renault sell special rivets that have the head that the metal butterfly clips hook onto. buy a pack they are cheap and easy to do.:agree:

gtmatt
28-02-2009, 18:55
have you got the part number for them thanks matt , or has any 1 got the number for them thanks matt:)

gtmatt
04-03-2009, 22:21
:)any 1 got the part number for the rivets , for the sills for the side skirts to clip on to ?? thanks matt