PDA

View Full Version : Who Da-Man ??


clee
21-02-2009, 15:45
Skoff da-man dats who :cool2::cool2::cool2:


Gta Jil is all booosted up to the max .Bigger injectors in and running a bar .:cool:
All going well and lovely smooth POWER .

Thanks Chris once again :)
Scoff
21-02-2009, 16:39
It just needs a TO4 now !
clee
21-02-2009, 16:50
I'll have words about that ....If I can get one at a reasonable rate :)
I've emailed that wiring info ....It is wired as I described .
All 6 pins A from each injector go to a single A and pins B to a single B in the std loom then to a pair of paired outputs A & B from Adapt :confused::laugh:

I know what I mean .....
Scoff
21-02-2009, 17:19
Ah, the diagram you sent me just now says that there are 2 injector wires that come down to the original Renix unit. The 4 outputs from the adaptronic have been bunched into 2 pairs, ie pins 5&6 make one pair and pins 7&8 make the other. You effectively have 2 high current outputs from the ECU then instead of 4. These are then connected to the 2 wires in the Renix loom. That's fine because each of those wires in the renix loom will feed the -ve side of 3 injectors. The +ve side of all 6 injectors will go to ignition live. It sounds like it is wired like this:
http://www.rtoc.org/files/Technical%20Files/Scoff/6cyl_injector_wiring.jpg

Which is fine.
clee
21-02-2009, 18:42
That's alright then :laugh:
See that's what happens when I think out loud ..I'll stick to drawing up little bits of plastic .
DaveAVT
23-02-2009, 11:59
It just needs a TO4 now !

More importantly, chargecooler, or a Cossie backend on the turbo he's already got.:)
clee
23-02-2009, 13:27
You can keep the CC Dave ,my twin air cooled mod works just fine,weighs nowt and cost less than the antifreeze in the CC :cooter:
I'm using the car for track but will want something for the odd blast up the strip .I've got the 60trim cossie that Adam will refurb and the std GTA one that's on at the minute .
0.48 turbine housing for both at present .I build these up on seperate collectors so can just swap quite quickly .

Another complication is another engine on the way with some head mods and cams .This could do with something like the T04 ??
Andrew Cooke
23-02-2009, 13:27
It just needs a TO4 now !

the blower off your 5 might do, it's about time you fitted a big one :D
DaveAVT
24-02-2009, 11:17
You can keep the CC Dave ,my twin air cooled mod works just fine,weighs nowt and cost less than the antifreeze in the CC :cooter:
I'm using the car for track but will want something for the odd blast up the strip .I've got the 60trim cossie that Adam will refurb and the std GTA one that's on at the minute .
0.48 turbine housing for both at present .I build these up on seperate collectors so can just swap quite quickly .

Another complication is another engine on the way with some head mods and cams .This could do with something like the T04 ??

Works 'fine' in the winter...;), and its only coping 'fine' (in winter) because you are running conservative boost. If you want more power, youre going to have to run more boost. It won't cope 'fine' then ;)

You don't need a TO4, manifolds, 285bhp remember....
DaveAVT
24-02-2009, 11:27
Stick a 21 engine in, you can have 250bhp with no mods ;)
clee
24-02-2009, 11:34
It's gone up again :wasntme:

If I'd wanted a kitcar Id buy an Ultima :coffee:
DaveAVT
24-02-2009, 11:46
It's gone up again :wasntme:

If I'd wanted a kitcar Id buy an Ultima :coffee:

Whats gone up again?
clee
24-02-2009, 11:48
The BHP on that 21 engine
DaveAVT
24-02-2009, 11:50
The BHP on that 21 engine

Im talking about any 21T engine, not my 21T engine. Mine is only about 230.....BECAUSE I HAVENT GOT A CHARGECOOLER :D
Tiny Tim
24-02-2009, 11:51
Stay away from the tanning beds Dave, its messing up your brain.
DaveAVT
24-02-2009, 11:55
Stay away from the tanning beds Dave, its messing up your brain.

No need to now, i have a caaabrrreeeeooooolllaaaaayyyyy;)
Spooky
24-02-2009, 11:56
No need to now, i have a caaabrrreeeeooooolllaaaaayyyyy;)

Yea, but when you give it back to your dad, what you going to do ?
D4WNO
24-02-2009, 11:56
I saw it on facefook Dave, you huge gay :p
Tiny Tim
24-02-2009, 11:57
:sad2:
DaveAVT
24-02-2009, 11:57
Yea, but when you give it back to your dad, what you going to do ?

Get him to wear a David mask, and lifts in his shoes...
DaveAVT
24-02-2009, 11:58
I saw it on facefook Dave, you huge gay :p

Tell me you don't want it......and the car...;););););););)
Spooky
24-02-2009, 11:58
Tell me you don't want it......and the car...;););););););)

:laugh:
Spooky
24-02-2009, 11:59
Get him to wear a David mask, and lifts in his shoes...

At least we know where we can get a discounted hair cut...

Clee, what's the code again ? :laugh:
DaveAVT
24-02-2009, 12:01
Do I get any extra points if I point out its actually a 320 AMG 6 speed manual?

No...:dearme:
Tiny Tim
24-02-2009, 12:03
Do I get any extra points if I point out its actually a 320 AMG 6 speed manual?

No...:dearme:

Negatory. It just means you're a fast 'huge gay'.
clee
24-02-2009, 12:09
Beverly Hills Hairdressers car
DaveAVT
24-02-2009, 12:32
Beverly Hills Hairdressers car

F*CK OFF!














I do nails too....
Tiny Tim
24-02-2009, 12:41
Weeeeeeeeeeeeee!!!
DaveAVT
24-02-2009, 12:46
You ****, the head is not to scale.




Make it bigger.
Tiny Tim
24-02-2009, 12:48
You ****, the head is not to scale.




Make it bigger.

:rolleyes:
DaveAVT
24-02-2009, 12:53
Have you worked long at Adobe as a Photoshop demonstrator?...
Tiny Tim
24-02-2009, 12:56
Actually I work for Microsoft in the 'Paint' development department. Been on my own here for some years now :scratch:
DaveAVT
24-02-2009, 12:58
Actually I work for Microsoft in the 'Paint' development department. Been on my own here for some years now :scratch:

You know the hand you use to write with, try using that hand to operate your mouse...