PDA

View Full Version : Renault 5 GT Turbo , Slovakia


Peter Ciganyik
20-02-2009, 16:15
New poster! (less than 10 posts)

http://img297.imageshack.us/img297/962/p1080937dw0.jpg (http://imageshack.us)
http://img60.imageshack.us/img60/610/p1080953yx1.jpg (http://imageshack.us)
http://img292.imageshack.us/img292/8793/p1080951lr5.jpg (http://imageshack.us)
http://www.youtube.com/watch?v=6YORRX2TMRQ

and right now
http://img369.imageshack.us/img369/6808/renault5tuning134qd9.jpg
http://img369.imageshack.us/img369/1825/renault5tuning136im2.jpg
http://img187.imageshack.us/img187/7520/renault5tuning139oy2.jpg
http://img376.imageshack.us/img376/4580/renault5tuning001jb5.jpg
http://img523.imageshack.us/img523/2563/renault5tuning002hx2.jpg
http://img376.imageshack.us/img376/5771/renault5tuning003cz2.jpg
http://img523.imageshack.us/img523/5713/renault5tuning004bc7.jpg
http://img376.imageshack.us/img376/7769/renault5tuning005ge2.jpg
http://img523.imageshack.us/img523/5161/renault5tuning006qz9.jpg
http://img376.imageshack.us/img376/8056/renault5tuning007ii3.jpg
http://img523.imageshack.us/img523/7250/renault5tuning008qy2.jpg
http://img376.imageshack.us/img376/4664/renault5tuning009lq6.jpg
http://img523.imageshack.us/img523/3387/renault5tuning010of8.jpg
http://img376.imageshack.us/img376/7786/renault5tuning011ih3.jpg
http://img522.imageshack.us/img522/1543/renault5tuning014lh2.jpg
http://img515.imageshack.us/img515/1631/renault5tuning015pd9.jpg
http://img158.imageshack.us/img158/7117/renault5tuning016cu9.jpg
http://img87.imageshack.us/img87/7844/renault5tuning018wq5.jpg
http://img214.imageshack.us/img214/8652/freshdancedm4.gif
http://img101.imageshack.us/img101/1127/renault5tuning019go6.jpg
http://img206.imageshack.us/img206/2897/renault5tuning020xk3.jpg
http://img297.imageshack.us/img297/6245/renault5tuning024pv4.jpg
http://img242.imageshack.us/img242/4712/renault5tuning028zy9.jpg
http://img170.imageshack.us/img170/126/renault5tuning025wu7.jpg
http://img103.imageshack.us/img103/1239/renault5tuning026cw0.jpg
http://img144.imageshack.us/img144/6485/renault5tuning158sy2.jpg
http://img259.imageshack.us/img259/5583/renault5tuning159uc2.jpg
http://img144.imageshack.us/img144/8599/renault5tuning161zo8.jpg
http://img259.imageshack.us/img259/7839/renault5tuning162dh9.jpg
http://img144.imageshack.us/img144/6443/renault5tuning163zd3.jpg
http://img259.imageshack.us/img259/4323/renault5tuning164gy5.jpg
http://img129.imageshack.us/img129/1572/renault5tuning165ka2.jpg
http://img520.imageshack.us/img520/3527/renault5tuning166gg6.jpg
http://img129.imageshack.us/img129/7452/renault5tuning167yl7.jpg
http://img129.imageshack.us/img129/2071/renault5tuning168yv5.jpg
http://img520.imageshack.us/img520/1377/renault5tuning176ty0.jpg
http://img129.imageshack.us/img129/4577/renault5tuning178rl9.jpg
http://img520.imageshack.us/img520/6473/renault5tuning182og5.jpg
http://img129.imageshack.us/img129/6715/renault5tuning183bf3.jpg
http://img520.imageshack.us/img520/8027/renault5tuning184hf6.jpg
Peter Ciganyik
20-02-2009, 16:17
New poster! (less than 10 posts)

K-tec parts
http://img14.imageshack.us/img14/6/p1000202gv9.jpg
http://img24.imageshack.us/img24/6225/p1000231qm8.jpg
http://img412.imageshack.us/img412/7673/p1100046nj1.jpg
http://img412.imageshack.us/img412/5341/p1100050cw4.jpg
http://img11.imageshack.us/img11/236/p1080778wt8mo3.jpg
http://img21.imageshack.us/img21/5113/p1080780ov3ek0.jpg
http://img19.imageshack.us/img19/5663/p1080783cm1va2.jpg
http://img18.imageshack.us/img18/5391/p1080784gz8cq5.jpg
http://img224.imageshack.us/img224/4549/p1000073qe2.jpg
http://img166.imageshack.us/img166/3460/p1000074zy7.jpg
http://img72.imageshack.us/img72/1175/p1000075ie0.jpg
[img]
Peter Ciganyik
20-02-2009, 16:18
New poster! (less than 10 posts)

http://img389.imageshack.us/img389/8738/p1090502rw0.jpg
http://img370.imageshack.us/img370/1101/p1090503sx4.jpg
http://img56.imageshack.us/img56/4686/p1090504as7.jpg
my old and new k-tec big bore elbow
http://img224.imageshack.us/img224/1378/p1000004my8.jpg
http://img217.imageshack.us/img217/6682/p1000201rv2.jpg
http://img8.imageshack.us/img8/3613/p1000233io3.jpg
http://img9.imageshack.us/img9/8804/p1000234rj5.jpg
http://img10.imageshack.us/img10/4549/p1000235be4.jpg
Peter Ciganyik
20-02-2009, 16:19
New poster! (less than 10 posts)

http://img166.imageshack.us/img166/5825/renault5tuning205gz4.jpg
http://img105.imageshack.us/img105/7017/renault5tuning206oz3.jpg
http://img105.imageshack.us/img105/9871/renault5tuning220ie0.jpg
http://img398.imageshack.us/img398/5369/renault5tuning224pl3.jpg
http://img518.imageshack.us/img518/1488/renault5tuning225ws5.jpg
http://img166.imageshack.us/img166/7814/renault5tuning230fk5.jpg
http://img105.imageshack.us/img105/3700/renault5tuning231nw8.jpg
http://img105.imageshack.us/img105/8379/renault5tuning232cu3.jpg
http://img398.imageshack.us/img398/6533/renault5tuning233yp9.jpg
http://img518.imageshack.us/img518/3874/renault5tuning234rm4.jpg
http://img407.imageshack.us/img407/982/renault5tuning235sv9.jpg
http://img217.imageshack.us/img217/1471/p1000200vx4.jpg
http://img19.imageshack.us/img19/6857/renault5tuning237jp7.jpg
Peter Ciganyik
20-02-2009, 16:20
New poster! (less than 10 posts)

http://img22.imageshack.us/img22/1517/p1000238co8.jpg
http://img10.imageshack.us/img10/636/p1000240rv3.jpg
http://img15.imageshack.us/img15/7822/p1000237cc8.jpg
http://img12.imageshack.us/img12/9528/renault5tuning244hs2.jpg
http://img13.imageshack.us/img13/1593/renault5tuning245ia6.jpg
http://img18.imageshack.us/img18/6932/renault5tuning248rz8.jpg
http://img10.imageshack.us/img10/5108/renault5tuning249rc2.jpg
http://img22.imageshack.us/img22/815/renault5tuning251pa0.jpg
Thanks to : Powered by Erik Sládek
Markey Mark (BD)
20-02-2009, 16:33
That is looking really nice mate, makes me want to take a few pits of mine and repaint them.

One thing i have to ask, you did sand all the paint off the top of the block didn't you before the head went on? Noticed you had painted the whole block and not masked off any area.
Big Steve - Raider
20-02-2009, 17:18
FUUUUUUUUUUUUUUUUUUUUUUUUUUUUKKKK That's good work Peter!!:goodJob:

Reminds me of when i did mine...... ahh what memories :crush:
raj
20-02-2009, 17:22
a very tidy rebuild mate :agree: i like it:) simple.sweet.c1j.:cool:
jure
20-02-2009, 17:31
Top job Peter! Nice to see mint GTT outside UK :agree: :agree: :agree:
Bod
20-02-2009, 17:49
Great work mate:cool:
Os8472
20-02-2009, 18:42
Dude thats a blinding job, fantastic work there, keep it up
gtmatt
20-02-2009, 18:52
thats a top job , whats the plateing called ,that u have had done on your brackets ?? zinc ??? im after the same over here ,and did u sand blast your hubs ???:) keep up the good work , must spent some pennys there:)
raj
20-02-2009, 18:59
thats a top job , whats the plateing called ,that u have had done on your brackets ?? zinc ??? im after the same over here ,and did u sand blast your hubs ???:) keep up the good work , must spent some pennys there:)

is THIS (http://www.rtoc.co.uk/boards/showpost.php?p=19532&postcount=6) what your after matt.?
raj
20-02-2009, 19:00
LOL anyone notice the clip inbetween pic 21 and 22 lol :laugh: a nice little interlude there:laugh:
Tiny Tim
20-02-2009, 19:10
Now THAT is a build. Excellent work Peter :agree:
gtmatt
20-02-2009, 19:14
is THIS (http://www.rtoc.co.uk/boards/showpost.php?p=19532&postcount=6) what your after matt.?

yeah raj , i take it u sent all you parts of mate ?? will have to find some 1 round here in manchester to do it , what prices am i looking at for all the bracket to be done:)
raj
20-02-2009, 19:18
yeah raj , i take it u sent all you parts of mate ?? will have to find some 1 round here in manchester to do it , what prices am i looking at for all the bracket to be done:)

im sure you'll find an electroplaters in manchester. i couldnt tell you how much all the engine bay brackets cost as i had alot more done in one go. im sure i paid £50 for all the bits on the table to be plated. but this was around 2 1/2 yrs ago!
gtmatt
20-02-2009, 19:22
im sure you'll find an electroplaters in manchester. i couldnt tell you how much all the engine bay brackets cost as i had alot more done in one go. im sure i paid £50 for all the bits on the table to be plated. but this was around 2 1/2 yrs ago!

thanks raj gives me an idea , i think that looks so much better than chrome ,thats imo anyway ,ive still got alot of stuff to take off the car :) gives me a figue in mind:)
Andrew Cooke
20-02-2009, 19:22
what's the fiat engine in the background?

Are you struts on back to front? Difficult to be sure from the angle.
Scoff
20-02-2009, 19:35
Looking good :)

Paint on the top of the block worries me, as does the paint behind the timing chain cover. it might flake eventually and end up in the oil!
raj
20-02-2009, 19:43
Looking good :)

Paint on the top of the block worries me, as does the paint behind the timing chain cover. it might flake eventually and end up in the oil!

i was going to say the same thing:agree: ive always masked all area that see any fluids before painting.
A17AMB
20-02-2009, 19:48
well:) done:) mate:) looks:) mint :)
Peter Ciganyik
20-02-2009, 19:50
New poster! (less than 10 posts)


That is looking really nice mate, makes me want to take a few pits of mine and repaint them.

One thing i have to ask, you did sand all the paint off the top of the block didn't you before the head went on? Noticed you had painted the whole block and not masked off any area.

Yes, before painting I removed the head and I also noticed that area.
Peter Ciganyik
20-02-2009, 19:52
New poster! (less than 10 posts)


FUUUUUUUUUUUUUUUUUUUUUUUUUUUUKKKK That's good work Peter!!:goodJob:

Reminds me of when i did mine...... ahh what memories :crush:

You have a nice Raider and nice test during rain :)
Peter Ciganyik
20-02-2009, 19:53
a very tidy rebuild mate :agree: i like it:) simple.sweet.c1j.:cool:

thanks
Spooky
20-02-2009, 19:54
thumbs up from me too, that looks very tidy :smokin:
Peter Ciganyik
20-02-2009, 19:55
Top job Peter! Nice to see mint GTT outside UK :agree: :agree: :agree:

you have also nice grey R5 GTT
Peter Ciganyik
20-02-2009, 20:01
thats a top job , whats the plateing called ,that u have had done on your brackets ?? zinc ??? im after the same over here ,and did u sand blast your hubs ???:) keep up the good work , must spent some pennys there:)

yeah, its zinc (gold and silver) and i sand blasted those hubs, which was costly and thanks RTOC for 5% discount in K-TEC
D4WNO
20-02-2009, 20:05
Errrrr...WOW! I actually said it out loud too :agree:

That is seriously impressive Peter, nice work

p.s - I like the random dancing vid in the middle of the photos lol :laugh:
Peter Ciganyik
20-02-2009, 20:06
Now THAT is a build. Excellent work Peter :agree:

thank you and my car is rebuilded by my mate - Erik Sladek
Peter Ciganyik
20-02-2009, 20:14
what's the fiat engine in the background?

Are you struts on back to front? Difficult to be sure from the angle.

yes, it is engine of fiat 126
Peter Ciganyik
20-02-2009, 20:30
Looking good :)

Paint on the top of the block worries me, as does the paint behind the timing chain cover. it might flake eventually and end up in the oil!

yeah it was painted, but the paint was removed after photo shoot
Peter Ciganyik
20-02-2009, 20:31
well:) done:) mate:) looks:) mint :)

thank you
Peter Ciganyik
20-02-2009, 20:38
Errrrr...WOW! I actually said it out loud too :agree:

That is seriously impressive Peter, nice work

p.s - I like the random dancing vid in the middle of the photos lol :laugh:

http://img214.imageshack.us/img214/8652/freshdancedm4.gif

thanks - i was happy to see that painting, so i past this dancing vid there
Sy5GTT
20-02-2009, 21:05
Top Job there Peter. :agree:
Robbo
20-02-2009, 23:07
yeah raj , i take it u sent all you parts of mate ?? will have to find some 1 round here in manchester to do it , what prices am i looking at for all the bracket to be done:)


you can get your own kit to electroplating, not sure if its any good tho
tonesGTT
20-02-2009, 23:40
:goodJob: :agree: really like that :cool:
w35ty
21-02-2009, 00:52
yeah likeing that!!:agree::agree::agree::agree:
J$£5GTT
21-02-2009, 19:45
:agree: :)
JRP
21-02-2009, 19:53
Those picture have me aroused. Very nice indeed:cooter::cooter:
adeel_gt
21-02-2009, 20:33
New poster! (less than 10 posts)

Very, very nice mate. top job:agree:
Peter Ciganyik
22-02-2009, 08:16
new photo
http://img18.imageshack.us/img18/7453/p1000249vg5.jpg
http://img18.imageshack.us/img18/8510/p1000269mb2.jpg
http://img27.imageshack.us/img27/6643/p1000272op2.jpg
http://img23.imageshack.us/img23/3061/p1000273vs6.jpg
Sparkie
22-02-2009, 10:39
the r4 van looks cool too!
Trevhib
22-02-2009, 11:04
Super car and build :agree: Why oh why blue hoses on a red car though?

If I'm not mistaken isn't that Will and Carlton from the Fresh Prince dancing in that vid? :D
pocket rocket
22-02-2009, 18:04
New poster! (less than 10 posts)

Amazing work Peter and Erik :) Try and get a 1/4 mile video added at some time be nice to see. Great to see these types of builds keep 'em coming. :D:D:D
jantheeven
24-02-2009, 14:18
Super car and build :agree: Why oh why blue hoses on a red car though?

If I'm not mistaken isn't that Will and Carlton from the Fresh Prince dancing in that vid? :D

I think that's them, yes... :wasntme:
wrightygtt
24-02-2009, 15:19
Super car and build :agree: Why oh why blue hoses on a red car though?

If I'm not mistaken isn't that Will and Carlton from the Fresh Prince dancing in that vid? :D


You wouldn't like mine then I went for lime green:cartman:

Excellent work Peter, car looks ace:cool:
kid raider
24-02-2009, 22:22
great thread. the build and car are both stunning. top job. :agree::agree::agree:
Peter Ciganyik
05-04-2009, 23:57
New video 5.4.2009

http://www.youtube.com/watch?v=WvbKgRoXRZk&feature=channel (http://www.youtube.com/watch?v=WvbKgRoXRZk&feature=channel) :coffee:
5alldaway
05-04-2009, 23:58
wow that looks very nice and simple! one of the better ones i have seen recently
Saint AAI
06-04-2009, 08:47
New poster! (less than 10 posts)

Wow, that looks amazing. Wish I had time, money and patience to do all that.


Slightly off subject, but whats the pipe in this photo for exactly, is it a return for the oil to the sump? Whats likely to happen if it wasn't there? I had it left over after a re-build and could'nt think where it went :ashamed:. Now I know :).

http://img259.imageshack.us/img259/7839/renault5tuning162dh9.jpg
jure
06-04-2009, 09:57
It is dipstick canal/pipe. ;)

Oil return is located on the side of the sump.
Peter Ciganyik
17-06-2009, 07:42
New foto 16.6.2009

http://img382.imageshack.us/img382/6977/p1100776.jpg
http://img382.imageshack.us/img382/7883/p1100782.jpg

http://img36.imageshack.us/img36/929/p1000618.jpg
http://img15.imageshack.us/img15/2253/p1000637fcq.jpg
http://img15.imageshack.us/img15/4847/p1000638t.jpg
http://img15.imageshack.us/img15/1314/p1110017.jpg
http://img15.imageshack.us/img15/5753/p1110018.jpg
jure
17-06-2009, 07:58
Nice items. Seams that you hold 70% of K-tec sales :)

Keep up! What side exhaust are you going for? K-tec one maybe? :D
IANMM
17-06-2009, 09:01
Excellent example bud........but i would prefure the house in picture 1 :)
minty83
17-06-2009, 10:14
how much did u pay for the bonnet?
Peter Ciganyik
17-06-2009, 23:45
how much did u pay for the bonnet?

http://www.k-tecracing.com/show_product.asp?id=2072

-5% RTOC = 322,28L


http://img199.imageshack.us/img199/6135/p1000805.jpg
Peter Ciganyik
18-06-2009, 00:22
Excellent example bud........but i would prefure the house in picture 1 :)

This is Dunakiliti Palace , Hotel and Golf Club in Hungary

http://hotels.eurobookings.com/hotel/hu/princesspalace.html?label=gg_en_bh_75112-hungary-dunakiliti-hotel-princess-palace&gclid=CPKa6pG1kpsCFcwUzAodkmZ9Og (http://hotels.eurobookings.com/hotel/hu/princesspalace.html?label=gg_en_bh_75112-hungary-dunakiliti-hotel-princess-palace&gclid=CPKa6pG1kpsCFcwUzAodkmZ9Og)

http://en.wikipedia.org/wiki/Dunakiliti (http://en.wikipedia.org/wiki/Dunakiliti)
dave j gtt
18-06-2009, 08:44
:confused::confused::confused::confused:
dave j gtt
18-06-2009, 09:50
the car is sweeeeeeeeeet mate


maybe carb to actuator could be piped different ??

Or is there two way to do this ? I have blanked both carb top ports and ran pipe from centre of Carb to actuator :) works well wonder which is best :scratch:





http://img408.imageshack.us/img408/7595/p1000471.jpg
http://img408.imageshack.us/img408/1598/p1000472.jpg