View Full Version : 205 gti 8v/gti6
ok, here is my 205 gti project, i brought this car out of a field and it had been stood for around 5 years.
anyways if a lot of it makes no sence dont worry its many posts i have compiled together from another forum so a lot of it make seem crap well the beam is now off the car and the shocks removed, ready to go down to Constella which i plan to do on saturday . http://i3.photobucket.com/albums/y98/djinuk/SP_A0143.jpg dont believe it alex :P anyhow with the help of jason we removed the rusty remains of the old fog lights, and replaced with some aftermarket plastic units, which should withstand the test of time much better. http://i3.photobucket.com/albums/y98/djinuk/SP_A0149.jpg Also since the rear beam was off i decided i would do somthing i usally never lend my hand to.... I CLEANED .... the rear inner arches http://i3.photobucket.com/albums/y98/djinuk/SP_A0148.jpg well the torsion bar is now back on (for the minute) with the help of a few peeps :), the back end is rock steady now, go-kart style, not quite as low as sarahs however :) . Also got the solid mounts that should keep it rock steady now, will need to get some lower profile tyres, but will get around to doing that. well here is the monkeys, thanks for the help :) http://i3.photobucket.com/albums/y98/djinuk/themonkeys.jpg and the back end of the car http://i3.photobucket.com/albums/y98/djinuk/andbackdown.jpg well, spent a while today sorting out the intermittent starter motor problem and it seems all sorted now. Also putting the beam on Wednesday night. here it is painted up.. did do it with a yellow beam originally to look like pug oe parts but the yellow was to much hard work so painted the whole thing black . http://i3.photobucket.com/albums/y98/djinuk/SP_A0155.jpg well i almost have all the samcos on.. ordering my engine mounts tomorrow and hope to get the brakes done this weekend so all going well http://i3.photobucket.com/albums/y98/djinuk/SP_A0157.jpg http://i3.photobucket.com/albums/y98/djinuk/SP_A0158.jpg update, shiny front and back stoppers now on with new brake lines, much appreciated Biggy :) http://i3.photobucket.com/albums/y98/djinuk/SP_A0176.jpg http://i3.photobucket.com/albums/y98/djinuk/SP_A0177.jpg Had a delivery today, super quick, top stuff from bm baker as always highly recomended, Had a Full set of Grp N engine mounts and my final hose (oil filler hose) in silicon so shouldn't go brittle http://i3.photobucket.com/albums/y98/djinuk/SP_A0184.jpg well update done 2 of 3 engine mounts now, replaced for group n , yey, also done lots of other odd bits, fixed blowing exhaust etc etc, ran outa fuel on my drive now though. The third engine mount i dont think i am going to fit just yet as it requires being pressed and i have to take a driveshaft out to get to it , so i will wait until its on the road and speak 2 biggy about free rental on a Gun to make the job easier out with the old http://i3.photobucket.com/albums/y98/djinuk/oldenginemount.jpg cleaned out the throttle body .. n breathers still no joy, .. ill will going at it till i pull the problems out, ive been told it may just need driving but we will see. anywayz new purchase today, just need james to fabricate me subframes. I went for a mixture on this one and went for a good mix between motorsport value and comfort . anywayz here are a few poor pics. http://i3.photobucket.com/albums/y98/djinuk/SP_A0202.jpg http://i3.photobucket.com/albums/y98/djinuk/SP_A0200.jpg well, car got its first (exterior) clean today, thanks to dave for helping me remove the years of moss that has formed on it, Jason also managed to sort my earthing problem (fingers crossed. anyway a good day next things are to clean the interior, tidy the car, remove the rear seats, get harnesses in.. oh and sort the rattling cambelt cover. http://i3.photobucket.com/albums/y98/djinuk/27012008416.jpg http://i3.photobucket.com/albums/y98/djinuk/27012008418.jpg http://i3.photobucket.com/albums/y98/djinuk/27012008419.jpg http://i3.photobucket.com/albums/y98/djinuk/27012008420.jpg http://i3.photobucket.com/albums/y98/djinuk/27012008421.jpg http://i3.photobucket.com/albums/y98/djinuk/27012008423.jpg http://i3.photobucket.com/albums/y98/djinuk/27012008424.jpg lol, nah angry cloe loves ya :P.. thanks for that alex, makes it all worth it hearing things like that.. well made a new purchase thanks to sneydster . cheers bud http://i3.photobucket.com/albums/y98/djinuk/Carbonfibremirrors.jpg just got to make up some smart looking base plates now pics to accompany sundays mayhem...... http://i223.photobucket.com/albums/dd5/darush100/03022008433.jpg lolol.. look at the jubilation of big jase's face... its clearly been a while since he found his small tool!!!!! lolol http://i223.photobucket.com/albums/dd5/darush100/03022008434.jpg just need one now of the empty bay.. before and after a clean.... but now for the highlight of the day.. deej's up n cummence.... http://i223.photobucket.com/albums/dd5/darush100/03022008432.jpg BIGGY says, "Bleed *****" Ok , since as i had some group n suspension rubbers i decided it would be a nice time to remove a little of the rust that had built up on my spax suspension and jst brighten it up a little, however i didnt want to go as far as powercoating as come summer i plan for some bilstein coilovers, so anyway here is a few pics. wirebrush to remove old paint and flaky rust. http://i3.photobucket.com/albums/y98/djinuk/derusting.jpg sarah begins on the springs http://i3.photobucket.com/albums/y98/djinuk/springsbegin.jpg 2 completed dampers http://i3.photobucket.com/albums/y98/djinuk/2xpaintedshocks.jpg 2 completed springs http://i3.photobucket.com/albums/y98/djinuk/paintedsprings.jpg and a set of group n rubbers http://i3.photobucket.com/albums/y98/djinuk/groupnsuspensionrubbers.jpg the car as it stands :cry: http://i3.photobucket.com/albums/y98/djinuk/08022008070.jpg http://i3.photobucket.com/albums/y98/djinuk/08022008071.jpg one completed suspension leg http://i3.photobucket.com/albums/y98/djinuk/14022008076.jpg http://i3.photobucket.com/albums/y98/djinuk/17022008459.jpg http://i151.photobucket.com/albums/s152/davidas_2007/BHS%20Feb%2008/IMG_0574.jpg well as you can see from the pic the car is now alive and running with full working electrics, however it is still not 100% perfect mechanically. Plans are for this week to fit my Avo Front CoilOvers Whilst at the same time doing my DriveShaft Oil Seals to try to solve my leaking G-Box problem. Then at the weekend i plan to get a Heater Matrix as mine seems to have a leak hence the condensation forming in my car. Busy week again . Once is leaking no more fluids and gripping the road like it should ill get onto making it look the part. hehe, i look forward to the heater martix, tonight i swapped my drive shaft seals for some new pug items. Here are a few pics New seals. (diffrent to the ones i removed) http://i3.photobucket.com/albums/y98/djinuk/newseals1.jpg http://i3.photobucket.com/albums/y98/djinuk/newseals2.jpg Old seal New Seal fitted http://i3.photobucket.com/albums/y98/djinuk/fitted.jpg Today i had a delivery http://i3.photobucket.com/albums/y98/djinuk/P1010394.jpg so hopefully i plan to get them on Saturday, as well as pick up a new rad and fit it , aswell as find a heater matrix from loomsies, plus fit it. oh its great fun :P Well had a busy weekend, thanks to biggy and jason for taking me shopping for my new parts. new heater matrix new radiator full exhaust plus 4 branch manifold. Heater matrix was a doddle, little fiddly but cant see what so many people seemed to find so hard about it. new rad is on now, so now more constant filling up with water. coilovers are now on, and the car handles like it should. http://i3.photobucket.com/albums/y98/djinuk/carstance.jpg http://i3.photobucket.com/albums/y98/djinuk/archwheel.jpg and a big thanks to biggy putting up with me and helping me fit my new exhaust manifold. http://i3.photobucket.com/albums/y98/djinuk/4branch.jpg Not much of a update here, just a old pic of the engine we have put in it. Plans are now to get it all pretty :wink: http://i3.photobucket.com/albums/y98/djinuk/16022008077.jpg http://i223.photobucket.com/albums/dd5/darush100/09032008548.jpg http://i25.tinypic.com/2i6f4nd.jpg
small update for me, i fitted some infinty comps which i got for a bargain price, and ran them off a inphase amp, sounds great for average listerning. I also brought a full new red trim set from pug, with thanks to donna for her delivery and discount. big thanks ! http://i81.photobucket.com/albums/j237/sarahbabe2006/17022007123.jpg http://i81.photobucket.com/albums/j237/sarahbabe2006/20022007124.jpg http://i81.photobucket.com/albums/j237/sarahbabe2006/20022007125.jpg http://i81.photobucket.com/albums/j237/sarahbabe2006/20022007126.jpg plus new clips ;) :D
latest mod. I purchased a full replacement unit quickshift from rob @ Constella, The quality of it feels great, when i picked it up i had to be care full as the gearnob has only jst come off the polisher. anyway , bit of a ball ache to fit, but once on it felt so much more positive, and reduced the play in my gear selection dramatically aswell as the throw. here is the unit before fitting. http://i3.photobucket.com/albums/y98/djinuk/19032007169.jpg and me removing the old unit http://i3.photobucket.com/albums/y98/djinuk/19032007170.jpg
speant a bit of time on the front end, my new frenchie yellow fogs are now here, i went for the ones with yellow reflective backs rather than lenses , bit diffrent i thought, ignore the black grill , im still in 2 minds, also new indicators fitted. http://i3.photobucket.com/albums/y98/djinuk/cloesnewlightsandindicators.jpg http://i3.photobucket.com/albums/y98/djinuk/cloesnewlights.jpg
will start hunting for a new tailgate then, as promised pics of the orange wheels, the colour is strange, when in the son the colour is very peachy and glitter stands out nice, at night it goes a very dark orange, will get some pics when sunny if it ever is to show, makes a change anyhow and its a bit fresher for the car. http://i3.photobucket.com/albums/y98/djinuk/orangewheel2.jpg http://i3.photobucket.com/albums/y98/djinuk/orangewheel.jpg
and fitted http://i3.photobucket.com/albums/y98/djinuk/steeringwheel-1.jpg looks nicer though now its all cleaned inside etc
hmm maybe maybe i got a present today, lots of wires. http://i3.photobucket.com/albums/y98/djinuk/19072007376.jpg http://i3.photobucket.com/albums/y98/djinuk/19072007377.jpg http://i3.photobucket.com/albums/y98/djinuk/20072007380.jpg http://i3.photobucket.com/albums/y98/djinuk/20072007381.jpg http://i3.photobucket.com/albums/y98/djinuk/20072007383.jpg lots of wires :(
well today, i grabbed myself one of these as i think its going to be needed. http://i3.photobucket.com/albums/y98/djinuk/25072007388.jpg Also got the lamda sensor ill be needing (bosch) as i swear by them. http://i3.photobucket.com/albums/y98/djinuk/25072007392.jpg And the great gti6 manifold http://i3.photobucket.com/albums/y98/djinuk/25072007389.jpg http://i3.photobucket.com/albums/y98/djinuk/25072007390.jpg http://i3.photobucket.com/albums/y98/djinuk/25072007391.jpg
not really done much over xmas, but got delivery of my new engine crane, and tested the loading capacity by getting ben to hang off it. http://i3.photobucket.com/albums/y98/djinuk/29072007393.jpg
ok update, i now have some pics of the engine, also i wrapped it up until i need to look at putting it in. http://i3.photobucket.com/albums/y98/djinuk/P9260491.jpg http://i3.photobucket.com/albums/y98/djinuk/P9260494.jpg
well ive got a couple of extra bits, Loom for the rev counter on the gti6 off spiky http://i3.photobucket.com/albums/y98/djinuk/13092007432.jpg And a adapter to fit the therostat housing off my 8v onto the gti6 from stew @ bm baker http://i3.photobucket.com/albums/y98/djinuk/13092007433.jpg http://i3.photobucket.com/albums/y98/djinuk/13092007434.jpg
update.
Continued removing the 8v unit,
wiring loom placed neatly over drivers side wing.
http://i3.photobucket.com/albums/y98/djinuk/21102007460.jpg
Inlet manifold removed
http://i3.photobucket.com/albums/y98/djinuk/21102007461.jpg
with a bit of shuffeling and movign around one engine on engine crane, ( along with tom who helped with the removal)
http://i3.photobucket.com/albums/y98/djinuk/21102007462.jpg
one engine bay now empty
http://i3.photobucket.com/albums/y98/djinuk/21102007463.jpg
and the gti6 which is going in its place
http://i3.photobucket.com/albums/y98/djinuk/21102007464.jpg
looks good!
i had my Turbo 2 photo shoot with the Baker BM fella.... nice guy, but was abit of a plank.:laugh:
5alldaway
23-03-2009, 10:53
cant wait for a passenger ride fella, should be pretty damn awesome when its done
looks good!
i had my Turbo 2 photo shoot with the Baker BM fella.... nice guy, but was abit of a plank.:laugh:
yea man i know the guy stew. He has a rebuilt 1.6 box with mi16 final drive that im umming about having, but im not sure, its geared a little low for the gti6
Well Cut of the rotton bumper mounts today (will be ordering new from pug)
http://i3.photobucket.com/albums/y98/djinuk/24102007472.jpg
Then took a good look around at the areas of rust to trackle. This is what i found. After much proding with a screwdriver though it appears none of it was weak/soft so all good. !!
http://i3.photobucket.com/albums/y98/djinuk/24102007473.jpg
http://i3.photobucket.com/albums/y98/djinuk/24102007474.jpg
http://i3.photobucket.com/albums/y98/djinuk/24102007475.jpg
onch again work has been on going. the clifford wiring :( http://i3.photobucket.com/albums/y98/djinuk/26102007477.jpg and the old 8v loom removed after i cut off the ecu plug. http://i3.photobucket.com/albums/y98/djinuk/8vloomremoved.jpg Further poking at the inner wing and i find a hole :( cant really see it to well but basically the dark area needs welding up, luckily that should not be a prob from under the arch to get to. http://i3.photobucket.com/albums/y98/djinuk/archhole.jpg then i speant some monnies on all the kit to make my own brake lines, also got a pair of the pipe bending pliers. http://i3.photobucket.com/albums/y98/djinuk/brakelinekit.jpg and 7 bolts later the off comes the whole front subframe http://i3.photobucket.com/albums/y98/djinuk/subframeremoved.jpg Then i turned attention to the engine block and stripped off the inlet etc to see exactly what i was working with and where the oil leak was from. http://i3.photobucket.com/albums/y98/djinuk/oil3.jpg http://i3.photobucket.com/albums/y98/djinuk/oil1.jpg http://i3.photobucket.com/albums/y98/djinuk/oil2.jpg
Well another hard day work on the car, a bit closer , but stilll plenty more work to be done.
Wel the greasy subframe and other bits were treated to a £2.50 shappoo and rinse at the local petrol station.
http://i3.photobucket.com/albums/y98/djinuk/30102007509.jpg
and clean
http://i3.photobucket.com/albums/y98/djinuk/30102007510.jpg
Then the G man came over n whipped my front wings off, thanks man, (he also lost temper with one)
http://i3.photobucket.com/albums/y98/djinuk/30102007512.jpg
And tom sat in my engine bay with the lil steamer
http://i3.photobucket.com/albums/y98/djinuk/30102007507.jpg
which worked well
http://i3.photobucket.com/albums/y98/djinuk/30102007508.jpg
and my non existant bumper brackets
http://i3.photobucket.com/albums/y98/djinuk/30102007511.jpg
Well had my welder james coem to cut out all of the rotton areas in the inner wing and sort them out and get them and seam sealed them all up. Then Gray came over and gave my bay prep some paint. There are a few areas that need a quick look at but all good. What do you think to the colour ?
http://i3.photobucket.com/albums/y98/djinuk/06112007527.jpg
file:///C:/DOCUME%7E1/Damian/LOCALS%7E1/Temp/moz-screenshot-6.jpghttp://i3.photobucket.com/albums/y98/djinuk/06112007529.jpg
http://i3.photobucket.com/albums/y98/djinuk/06112007530.jpg
http://i3.photobucket.com/albums/y98/djinuk/06112007533.jpg
Also i got the brass linkage bush kit from baker bm, and i must say its fits great and has 100% removed play from it, damn good buy.
http://i3.photobucket.com/albums/y98/djinuk/04112007525.jpg
Also got a nylon bush kit for the fork linkage.
file:///C:/DOCUME%7E1/Damian/LOCALS%7E1/Temp/moz-screenshot-7.jpghttp://i3.photobucket.com/albums/y98/djinuk/04112007526.jpg
dickiegtt
06-04-2009, 19:19
Really coming on mate:agree::agree: The colour is beaut, i am a big fan of white cars tho! Keep up the good work! Look forwrd to that spin:D
Looking good :agree:
Once again another car being reborn with loads of effort and time going into it.
Good work.............can see my shocks coming out of mine for a little paint job:)
somes pics of the engien bay second time round.
Opinions welcome.
seam sealer spec brush
http://i3.photobucket.com/albums/y98/djinuk/10112007537.jpg
http://i3.photobucket.com/albums/y98/djinuk/10112007538.jpg
http://i3.photobucket.com/albums/y98/djinuk/10112007539.jpg
guide coat after high build ready to flat
http://i3.photobucket.com/albums/y98/djinuk/11112007540.jpg
and some more
http://i3.photobucket.com/albums/y98/djinuk/11112007541.jpg
http://i3.photobucket.com/albums/y98/djinuk/11112007542.jpg
http://i3.photobucket.com/albums/y98/djinuk/11112007543.jpg
http://i3.photobucket.com/albums/y98/djinuk/11112007545.jpg
http://i3.photobucket.com/albums/y98/djinuk/11112007546.jpg
http://i3.photobucket.com/albums/y98/djinuk/11112007547.jpg
http://i3.photobucket.com/albums/y98/djinuk/11112007547.jpg
http://i3.photobucket.com/albums/y98/djinuk/11112007549.jpg
And just to show , i havnt got massive funds, nor have i got a garage (not one for my car to go in anyway, the weather was bad so we improvised.
http://i3.photobucket.com/albums/y98/djinuk/11112007550.jpg
http://i3.photobucket.com/albums/y98/djinuk/11112007551.jpg
i did the same with the seem sealer that stuff is a pain mate , but looks top good job is that base coat and clear ??:)
keep up the good work
yea it isnt the easiest stuff to use. The paint is a direct gloss, therefore no base coat/laquer , its ideal as i want to track the car, and should i have any bumps it will be much easier to blow the direct gloss in i think .
looking really nice. like the orange wheels, always nice to have something a bit different :P
Turned attention today towards the engine, stripped it down and gave the main block and oil cooler a lick of engine paint, its halfords gloss black stuff and i must say hats off , fast drying easy to apply and great coverage, spot on for £5 or so. Also i replaced copper washers for all the senders, fitted Sandys Tpiece adapted and fitted a genuine pug oil filter to the engine. Also whizzed of the cambelt cover to check condition, it all looks about new but ill be changing it anyway for piece of mind.
http://i3.photobucket.com/albums/y98/djinuk/12112007554.jpg
http://i3.photobucket.com/albums/y98/djinuk/12112007553.jpg
http://i3.photobucket.com/albums/y98/djinuk/12112007555.jpg
http://i3.photobucket.com/albums/y98/djinuk/12112007552.jpg
Well i attacked the brake servo and master cylinder with hammerite spray paint , first thing i will say is this stuff is a nightmare to paint and goes on like piss, seams the lightest coat ever is needed to give the paint something to stick to once its gone tacky, anyway here are a few pics.
http://i3.photobucket.com/albums/y98/djinuk/13112007556.jpg
http://i3.photobucket.com/albums/y98/djinuk/13112007557.jpg
http://i3.photobucket.com/albums/y98/djinuk/14112007560.jpg
quick pic of first coat on the master cylinder *just shows how thin the paint is*
http://i3.photobucket.com/albums/y98/djinuk/13112007558.jpg
then gave my gearbox a lick of paint to tidy it up.
http://i3.photobucket.com/albums/y98/djinuk/14112007559.jpg
bit of an update, firstly i brought and fitted a 1.9 mi16 push clutch to the gti6 engine and bolted on the gearbox.
http://i3.photobucket.com/albums/y98/djinuk/21112007570.jpg
http://i3.photobucket.com/albums/y98/djinuk/21112007571.jpg
http://i3.photobucket.com/albums/y98/djinuk/21112007572.jpg
Then i reseamsealed the eghaust tunnel where the heat had caused the o/e stuff to all crack of.
http://i3.photobucket.com/albums/y98/djinuk/20112007566.jpg
shutzz the front arches
http://i3.photobucket.com/albums/y98/djinuk/20112007567.jpg
Gave the driving light cases a lick of paint as they were battered after only 4 months of use (denji/bad quality)
http://i3.photobucket.com/albums/y98/djinuk/20112007569.jpg
Then fitted Various brackets, subframe and brake servo back into the engine bay.
http://i3.photobucket.com/albums/y98/djinuk/20112007568.jpg
http://i3.photobucket.com/albums/y98/djinuk/21112007575.jpg
along with a pair of new pug arb bushes
http://i3.photobucket.com/albums/y98/djinuk/21112007574.jpg
Well i decided to have a shot at bolting up the engine today, the big ass heavy thing it is. Ignore the unpainted battery tray , that will be coming off at a later date for paint.
http://i3.photobucket.com/albums/y98/djinuk/01122007622.jpg
http://i3.photobucket.com/albums/y98/djinuk/01122007623.jpg
http://i3.photobucket.com/albums/y98/djinuk/01122007626.jpg
so at the moment its bolted in under the gearbox and the front drivers side top mount, fork mount isnt bolted as i need to adjust the manifold before it will fit. So far ive sliced the manifold across the bottom ready to bend it however my grinder could not get far enough into it so i fear i made need 10 mins with a hack saw.
http://i3.photobucket.com/albums/y98/djinuk/01122007628.jpg
I managed a few scuff marks but there were kept at a minmium
http://i3.photobucket.com/albums/y98/djinuk/01122007624.jpg
http://i3.photobucket.com/albums/y98/djinuk/01122007625.jpg
Dan O'Neill
01-05-2009, 23:11
Im loving this project, i have a real soft spot for 205 gti's good work keep it up.
got the engine in today , with the manifold cut and bent (still needs welding up) good clearance all round, not tried it with the master cylinder yet.. really happy though, here are the pics.
http://i3.photobucket.com/albums/y98/djinuk/11122007639.jpg
http://i3.photobucket.com/albums/y98/djinuk/11122007640.jpg
http://i3.photobucket.com/albums/y98/djinuk/11122007641.jpg
http://i3.photobucket.com/albums/y98/djinuk/11122007642.jpg
http://i3.photobucket.com/albums/y98/djinuk/11122007643.jpg
http://i3.photobucket.com/albums/y98/djinuk/11122007644.jpg
Got the manifold all welded up and threw a die grinder around the inner edge to get it smooth.
http://i3.photobucket.com/albums/y98/djinuk/14122007650.jpg
http://i3.photobucket.com/albums/y98/djinuk/14122007651.jpg
Also scotched up the thottle body and gave it a coat of paint.
http://i3.photobucket.com/albums/y98/djinuk/14122007652.jpg
And also preped up the inlet manifold with some scotch , and chucked some etch primer on the areas where i had gone through the original paint to metal.
http://i3.photobucket.com/albums/y98/djinuk/14122007645.jpg
Looks well :agree:
A mate of mine has an mi16 205 gti, Had a go in it a while back & it weren't too shy at all. Wouldn't mind one myself for a trackday toy.
theres been a delay in updates as the things ive been doing include
fitting genuine cambelt kit
replacing nuts and bolts from the subframe,
fitted engine and loom and fired it up for the first time and it all works.
collected a pair of new front wings
and now ive just stripped the manifold back down for paint and im working out the route to take with regards to plumbing the engine in.
http://i3.photobucket.com/albums/y98/djinuk/07012008672.jpg
http://i3.photobucket.com/albums/y98/djinuk/07012008673.jpg
Ive also been plumbing in the gti6 using some of the 8v hosing aswell as the thermostat adapter (curtoisy of baker bm) and some random hosing from scrapyards.
http://i3.photobucket.com/albums/y98/djinuk/19012008744.jpg
http://i3.photobucket.com/albums/y98/djinuk/19012008745.jpg
http://i3.photobucket.com/albums/y98/djinuk/19012008745.jpg
Ive not plumbed up the oil cooler housing as im going to get a remote oil cooler (mocal or similar)
Only thing ive realised now is the only bleeding point i have is the one on the thermostat, any ideas if i will manage to bleed the system ok.
well, i gave the inlet and cam covers a pruce up with some fresh paint, after scothing and panel wipe, they came up ok so thats all back on now.. Also i found a carvan shop that does 8mm fuel line and all the ends i need so on wednesday night ill be fitting new fuel lines to the car throughout and a 106 gti fuel filter underneath the car.
http://i3.photobucket.com/albums/y98/djinuk/22012008768.jpg
http://i3.photobucket.com/albums/y98/djinuk/22012008770.jpg
Also i took a video of the car running up to temp. (no manifold)
http://www.youtube.com/watch?v=Pk8kYBSFHPM
and the section i needed to cut for clearance
http://i3.photobucket.com/albums/y98/djinuk/22012008765.jpg
Also i have two redundant plugs hanging about the throttle body area.. do i need them ?
http://i3.photobucket.com/albums/y98/djinuk/22012008772.jpg
bit of an update, cars now on 4 wheels, with new wheel bearing etc, theres clearance with the borbets on the gti6 calipers, but only just, Ive fitted new fuel lines and opted for using the 306 fuel filter and mounting it below the rear brake compensator, i used the original barbed plastic connections etc to fit the fuel filter using the original quick release fittings and all seems well.
I guess ill soon be at a stage to look at the bodywork to some degree and get help from friends
http://i3.photobucket.com/albums/y98/djinuk/28012008773.jpg
http://i3.photobucket.com/albums/y98/djinuk/28012008773.jpg
http://i3.photobucket.com/albums/y98/djinuk/28012008776.jpg
http://i3.photobucket.com/albums/y98/djinuk/28012008777.jpg
http://i3.photobucket.com/albums/y98/djinuk/28012008778.jpg
sonic-jdm
27-06-2009, 23:28
love this project:agree:
likin the old school classics!
keep up the good work :cool:
malgré que je ne suis pas fan des 205 GTI , je doit bien avoué que ton projet et tout bonnement remarquables :
bien typé old school et racing , tout ce que j'aime !
although I am not fan of the 205 GTI, I must acknowledged well that your project and simply remarkable :eek: :
typified old school and racing well, all that I like :cool:
Well , as most of the engine side of things is complete i decided to take the plunge and begin attacking the bodywork..
First i removed the dash ready as i dont want to have to dodge this around spraying,
http://i3.photobucket.com/albums/y98/djinuk/29012008779.jpg
Then i removed the door pins which had seen better days, cant wait to get these replaced and see if it looses the play.
http://i3.photobucket.com/albums/y98/djinuk/29012008780.jpg
http://i3.photobucket.com/albums/y98/djinuk/29012008781.jpg
Then i decided to begin preping the boot floor which has a fair few dints, im not to worried about it being perfect but i decided to fill some low spots and block it off.. Im by no means a bodywork guy but i like to learn so hey may aswell give it a go where the finish isnt a huge problem.
http://i3.photobucket.com/albums/y98/djinuk/29012008782.jpg
http://i3.photobucket.com/albums/y98/djinuk/29012008784.jpg
One thing that has worried me is towards the back of the roof i have 3 very small holes (not sure what caused this) its solid around the holes, question is how do i attack it, i dont think it can be welded due to roof warping, i cant get underneath is as there is a stenghting bar right in the way so thats not possible.
Advice & suggestions
http://i3.photobucket.com/albums/y98/djinuk/29012008785.jpg
http://i3.photobucket.com/albums/y98/djinuk/29012008786.jpg
Well , i decided to go with a carbon fibre plate to cover my sunroof, firstly that would require a plate making up, a quick word with the mrs and she set about to it.., not bad for a girly girl eh :P
http://i3.photobucket.com/albums/y98/djinuk/12022008789.jpg
off comes the run roof
http://i3.photobucket.com/albums/y98/djinuk/12022008790.jpg
http://i3.photobucket.com/albums/y98/djinuk/12022008792.jpg
http://i3.photobucket.com/albums/y98/djinuk/12022008793.jpg
http://i3.photobucket.com/albums/y98/djinuk/12022008797.jpg
and the template is ready to send off for cutting and making up into shape.. :), i had to continue it so far back as to cover up the holes left by the sunroof sliders at the back of the roof.
Woznaldo
13-07-2009, 09:57
Nice work buddy, I like it a lot! Brave of you to let the missus near your car. I would never let my trouble & strife anywhere near the car for any maintenance. That said, it looks like she's done quite a good job!:D
Awesome project, that looks really good :agree:
I better not show this to my missus as she loves the 205GTi :D
haha, thanks guys, yea the mrs loves the 205's she also has one , a 20 xs with some headwork etc, real quick car on a twin choke carb so shes quite good when it comes to the cars :), shes not a fan of the r5's though really.
I once got her to underseal the full underneath of a car with a brush, ... however i forgot to give her a pair of gloves... not impressed!! :P
haha, thanks guys, yea the mrs loves the 205's she also has one , a 20 xs with some headwork etc, real quick car on a twin choke carb so shes quite good when it comes to the cars :), shes not a fan of the r5's though really.
I once got her to underseal the full underneath of a car with a brush, ... however i forgot to give her a pair of gloves... not impressed!! :P
Theres an idea, I'll mention that to my missus, she can crack on with the 172 :laugh::agree:
5alldaway
13-07-2009, 11:49
im astonished at how far the car has come matey, your efforts and those involved is an inspiration and im bloody proud of you, looks too sweet
dickiegtt
14-07-2009, 20:29
im astonished at how far the car has come matey, your efforts and those involved is an inspiration and im bloody proud of you, looks too sweet
Here Here!:D
I wondered what you were guna do about them holes! Go Sarah nice work there! Let me guess, were you upstairs on the rtoc by any chance while she was busy doin that?!:laugh:
5alldaway
14-07-2009, 20:41
more like he had his face in a pie while sarah was hard at work
anyway badgeless grill ftw deej, u know it makes sense!
On sunday , me and a friend slaved in a scrapyard to cut off a 205 non sunroof , roof. It was strapped to my r5 to bring it home and we got some comical looks.
All the spot welds on my current r5 roof are going to be drilled and removed, as are the welds on this donor roof , then they will be swapped
http://i3.photobucket.com/albums/y98/djinuk/roof1.jpg
http://i3.photobucket.com/albums/y98/djinuk/rooof2.jpg
update !!
I got the seast ive been after for sooo long, sparco evos.
http://i3.photobucket.com/albums/y98/djinuk/evo2.jpg
http://i3.photobucket.com/albums/y98/djinuk/evo3.jpg
http://i3.photobucket.com/albums/y98/djinuk/evo1.jpg
Also i left my friend to tackling the alternator, he used a bracket from an old volvo and modified it to fit and got halfords shortest alternator belt, 30 mins later and its all on , bolted up perfect.
http://i3.photobucket.com/albums/y98/djinuk/alt1.jpg
http://i3.photobucket.com/albums/y98/djinuk/alt2.jpg
With regards to the fuel lines ive decided to run the proper gti6 fuel filter with the push on clips (easy to change) and move all risk of fuel leaks away from the bulkhead.
http://i3.photobucket.com/albums/y98/djinuk/fuelclamp.jpg
http://i3.photobucket.com/albums/y98/djinuk/fuelfilter.jpg
http://i3.photobucket.com/albums/y98/djinuk/fuellines.jpg
Ive set the metal pipes right up the inside wing (will posibily heat and bend this to get them a bit straighter but you get the idea, its all super tight and working now :)
Another update, busy day.
Well ive not really ever painted out of a gun myself and i had two items, the battery tray and front slam panel, neither were in great condition and ideally could of done with powder coasting but instead i decided to use this time as some experiance for myself with spraying, worst case both items unbolt so can be redone.
I setup spray shop, and the equipment, the neighbours love me.
http://i3.photobucket.com/albums/y98/djinuk/spraybooth.jpg
http://i3.photobucket.com/albums/y98/djinuk/compressor.jpg
I then prepped both items to some degree, and gave them a panel wipe down, then on with quite a heavy layer of high build and left to dry, i then gave this a rub down with 400 grade.
http://i3.photobucket.com/albums/y98/djinuk/prepped.jpg
http://i3.photobucket.com/albums/y98/djinuk/highbuild.jpg
I then attacked both items again with the white 2k, i gave them 3 dry coats and then one heavy coat to try to get some shine on the items.
http://i3.photobucket.com/albums/y98/djinuk/inwhitepaint.jpg
The finished article
http://i3.photobucket.com/albums/y98/djinuk/finished2.jpg
http://i3.photobucket.com/albums/y98/djinuk/finsihed1.jpg
im happy with it for my first attempt, no runs or issed spots etc, only thing ive noticed when looking real close is there is a form of micro blister all over both items, this is barely noticable in the white and certainly wont be when in the bay, but im thinking if this was black or a dark color it wouldnt be. Ive put this down to maybe water in the compressor or similar , however if anybody wants to give there view i would appreciate that.
Also i noticed after finishing i had some how made a pattern of a guy jumping the mood :P
http://i3.photobucket.com/albums/y98/djinuk/14042008940.jpg
Big Supes
13-09-2009, 10:11
Top job fella. Keep up the good work.
:agree:
I'm no sprayer myself mate so i won't pass judgement, it's always worth giving it a go and maybe learing something in the process:agree:
Your project is great to follow and a credit to yourself mate, looking forward to the next update:cool::coffee:
dickiegtt
13-09-2009, 17:04
Nice job there deej:agree: You know i ain't gota clue but i think your right about the bit of water in the paint, i know you need to use one of them diffusers to attach to your compressor and then take your hose off of that when after a sweet finish, i've got em at work for about 8 buff if you want one mate;) It'd be worth undoing the sump plug and draining any sitting water out of the tank before you use it anyways,if you haven't already done it bud. Nice work:)
cars back from the bodyshop with a roof.
It appears to be spot welded in the original places and sleeved at the pillars.
I told him to leave all filler work etc and wait until the whole car is ready for prep and spray.
http://i3.photobucket.com/albums/y98/djinuk/190820081182.jpg
http://i3.photobucket.com/albums/y98/djinuk/190820081183.jpg
http://i3.photobucket.com/albums/y98/djinuk/190820081184.jpg
http://i3.photobucket.com/albums/y98/djinuk/190820081185.jpg
http://i3.photobucket.com/albums/y98/djinuk/190820081186.jpg
sometimes with filler you want to get it in as soon as possible, give it time to settle. but, you probably wanted to inspect the welding on a job like that, so it's probably for the best.
indeed there was that scoff. On this car im letting the bodyshop do the spray job (outside) so if theres in sinkage etc i guess ill just pop it back , hes a really sound guy and pretty easy going with things like that
decided to tackle some of the 205 yestrday..
I sanded back small areas where the etch wasnt good and re-etched, and turned my attention to the worst part of the car, the end section of the rear quarter..
It was full of dents like somebody had given it a very good kicking.
sanded back
http://i3.photobucket.com/albums/y98/djinuk/190320071439.jpg
then etched and a first coat of filler
http://i3.photobucket.com/albums/y98/djinuk/190320071440.jpg
couple of other dents i began to attack,
http://i3.photobucket.com/albums/y98/djinuk/190320071437.jpg
http://i3.photobucket.com/albums/y98/djinuk/190320071436.jpg
whilst my friend put new rear brake lines in aswell as some braided fleixs
http://i3.photobucket.com/albums/y98/djinuk/190320071438.jpg
long long awaited update..
I lost a lot of patience and time for the car , however today my welder james has been down to weld in the cage.. and i decided im going to hit it hard and get the inside done asap, then ill get it up to the bodyshop you blitz the outside. heres work so far.
http://i3.photobucket.com/albums/y98/djinuk/280320071778.jpg
http://i3.photobucket.com/albums/y98/djinuk/280320071777.jpg
http://i3.photobucket.com/albums/y98/djinuk/280320071776.jpg
http://i3.photobucket.com/albums/y98/djinuk/280320071775.jpg
http://i3.photobucket.com/albums/y98/djinuk/280320071774.jpg
will get cage bolted up at weekend, and hopefully make a start at removing the old seat rails and welding in some box section to accept the sparco ones. This should hopefully make for a much more solid seat and less likely to rip out the floor plan.
got the cage bolted in today, a job within itself , i need to grind a small area of weld back as its stopping me get just one of the bolts in , but other than that i think its about there.
I also need to just work on the sliders that join the front section to the back slightly but i dont think there far off.
http://i3.photobucket.com/albums/y98/djinuk/IMG_0053-1.jpg
http://i3.photobucket.com/albums/y98/djinuk/IMG_0052-1.jpg
http://i3.photobucket.com/albums/y98/djinuk/IMG_0055-1.jpg
http://i3.photobucket.com/albums/y98/djinuk/IMG_0050-1.jpg
put my slam panel on yesterday, which revealed a very slight clearance issue, i think this is most due to the fact i retrained teh standard engine mounts rather than leaning it back more like many people.. what i find is that my ran touches my inlet manifold by about 1mm.. I can space the couling out with a couple of washers which removed the problem, however as the grill locates onto the rad cowling this may cause that to sit out slightly, I will have a think how best to tackle it, i could probably grind a small amount away from the inlet however im not sure how much material there is there.
you can see the issue though to whole, however spacing it out (using my finger here sorts the problem)
http://i3.photobucket.com/albums/y98/djinuk/IMG_0071.jpg
clearance elsewhere with my modified slam panel is good.
http://i3.photobucket.com/albums/y98/djinuk/IMG_0073.jpg
http://i3.photobucket.com/albums/y98/djinuk/IMG_0074.jpg
Excellent work mate.. this will be a beaut when it's finished!
thanks for the comments,
little update , dave richard came down to help me with the welding,
managed to get inner seat rails welded in, just gota do the outside ones now
http://i3.photobucket.com/albums/y98/djinuk/IMG_0149.jpg
also whilst at it he fitted me a phase 2 rear light conversion
http://i3.photobucket.com/albums/y98/djinuk/IMG_0155.jpg
http://i3.photobucket.com/albums/y98/djinuk/IMG_0154.jpg
trying to covince him to loose his rear bumper and eghaust
http://i3.photobucket.com/albums/y98/djinuk/IMG_0159.jpg
Lose the rear bumper? Do you mean lose the rear spoiler?
I'd remove the spoiler and trim the exhaust back an inch.
Yours is coming along. Shame you lost the motivation halfway. Hope you get back on track. :agree:
carried on but then the welder ran outa gas.. grrr
http://i3.photobucket.com/albums/y98/djinuk/IMG_0261.jpg
http://i3.photobucket.com/albums/y98/djinuk/IMG_0260.jpg
few updates,
bolted in the seats, also attacked some rust spots under neath with por 15, will stone chip the whole boot floor and also the ares which were welded for seat mountings.
http://i3.photobucket.com/albums/y98/djinuk/IMG_0677.jpg
http://i3.photobucket.com/albums/y98/djinuk/IMG_0676.jpg
http://i3.photobucket.com/albums/y98/djinuk/IMG_0675.jpg
http://i3.photobucket.com/albums/y98/djinuk/IMG_0674.jpg
http://i3.photobucket.com/albums/y98/djinuk/IMG_0673.jpg
also my mate popped by and i had to get a pic as i love his e30
http://i3.photobucket.com/albums/y98/djinuk/IMG_0671.jpg
i assume thats the guy who is selling his e30?
i wish people would stop jumping on the dub bandwagon with the stickers.... IMHO of course ;)
indeed it is sparkie, , its actually sold now, well swapped with cash for an s13..
im not a fan of stickers full stop , but to be fair hes been on the game for a while now with turbo civics,dirty derv corsas, and about 6 bmw locked diff sideways machines, all of which had stickers before the whole craze of 'sticker bombing' so i forgive him :)
speant a bit of time this weekend doing the boring tasks on the pug..
Cleaned up all the crap off the floor, going in someway to prep it for paint, then etched all shiny metal, and seamsealed all welds, i also chucked a bit of stone chip over the etched areas simple because etch is porus and still alloys rust to develop is water gets to it.
http://i3.photobucket.com/albums/y98/djinuk/IMG_0736.jpg
http://i3.photobucket.com/albums/y98/djinuk/IMG_0735.jpg
http://i3.photobucket.com/albums/y98/djinuk/IMG_0733.jpg
http://i3.photobucket.com/albums/y98/djinuk/IMG_0732.jpg
speant some more time on the car.
Ive preped the inside and if my spray gun decides to work will be painting it tomorrow possibly, also i seam sealed the ares where the new roof was welded on, also tiger sealed the floor holes in.
http://i3.photobucket.com/albums/y98/djinuk/IMG_0764.jpg
http://i3.photobucket.com/albums/y98/djinuk/IMG_0763.jpg
http://i3.photobucket.com/albums/y98/djinuk/IMG_0762.jpg
modified the 205 bonnet to accept rams aswell, never did like the original bonnet stays as they fall to bits.
http://i3.photobucket.com/albums/y98/djinuk/IMG_0760.jpg
http://i3.photobucket.com/albums/y98/djinuk/IMG_0761.jpg
well , one compressor died, my air reg died, and my decent paint gun died.. however...
I managed to make the inside of the car white which is the main thing!.
http://i3.photobucket.com/albums/y98/djinuk/IMG_0772.jpg
http://i3.photobucket.com/albums/y98/djinuk/IMG_0771.jpg
http://i3.photobucket.com/albums/y98/djinuk/IMG_0770.jpg
http://i3.photobucket.com/albums/y98/djinuk/IMG_0769.jpg
http://i3.photobucket.com/albums/y98/djinuk/IMG_0768.jpg
http://i3.photobucket.com/albums/y98/djinuk/IMG_0766.jpg
update, dash is now in , and a few other bits, also finally managed to get the rear of the cage bolted in once and for all aswell as painted to a finish im happy with although once the diagonal in it may be having some welding carried out to add a horizontal harness bar.
http://i3.photobucket.com/albums/y98/djinuk/IMG_0857.jpg
http://i3.photobucket.com/albums/y98/djinuk/IMG_0856.jpg
Massive respect fella looks sweet as an all done on a driveway..110% for effort fella.
Always had a spot for the pug,they is a classic..;)
Keep it up..:agree:
R5TURBORON
22-05-2011, 23:07
Thats come a long way since i last seen it good work mate well done
cracked on with the car some more, front of cage is now in and fitted, also i made a couple of brackets and welded them in to lower the rad, will get that all bolted up tonight and then thats the front end virtually done. The weldings not pretty but i had no gas, however lots of hitting with a hammer and they dont budge.
new bonnet lifters are great
http://i3.photobucket.com/albums/y98/djinuk/IMG_1196.jpg
http://i3.photobucket.com/albums/y98/djinuk/IMG_1197.jpg
http://i3.photobucket.com/albums/y98/djinuk/IMG_1198.jpg
dave richared welded me up a slightly better slam panel, solid enough to hold the bonnet down, whilst offered far more clearance.
I painted it black as it seemed no mattery how well i painted the slam panel it would get beaten by the catch hitting it.. so i opted for a quick blast over with black.. simples.
http://i3.photobucket.com/albums/y98/djinuk/IMG_1963.jpg
http://i3.photobucket.com/albums/y98/djinuk/IMG_1965.jpg
few updates,
also my mate popped by and i had to get a pic as i love his e30
http://i3.photobucket.com/albums/y98/djinuk/IMG_0671.jpg
did you get owners consent? oh wait, thats me!!
dave popped over today, and helped me out lining up and sorting the front end, its amazing how hard it is to put a car back together when its been apart so long.
and so.
http://i3.photobucket.com/albums/y98/djinuk/misc/IMG_2414.jpg
http://i3.photobucket.com/albums/y98/djinuk/misc/IMG_2415.jpg
being that ive had 3 days of work i got busy and finished off the cage aswell as bolted the seats in .. :D.
Almost ready to send to the bodyshop and sit back awaiting its return!.
http://i3.photobucket.com/albums/y98/djinuk/misc/IMG_2471.jpg
http://i3.photobucket.com/albums/y98/djinuk/misc/IMG_2470.jpg
http://i3.photobucket.com/albums/y98/djinuk/misc/IMG_2458.jpg
late xmas pressie
http://i3.photobucket.com/albums/y98/djinuk/misc/IMG_2579.jpg
and to the bodyshop for fresh white paint.
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash4/422798_10151390894250707_525440706_23175404_979989 393_n.jpg
Id just like to add i think i will be putting this car up for sale once completed, It will be strong money as its one of the few conversion done, and done right with no corners missed. With a supercharger conversion these was see 300+ horse so ripe for making somewhat mental, or sticking with the 167 standard bhp of the gti6.
Mate this is real smart :)
REBEL GT TURBO
07-10-2012, 18:55
Looks sweet mate! Can't wait to see it all finished!
Great project mate how do you find the time for all these projects
Tony Walker
07-10-2012, 20:54
Great project mate how do you find the time for all these projects
I agree, R5 MX5 205 Do you have a 5 thing???:cooter: your doing 3 cars better than i can do one lol
I know he makes it look so effortless really annoying lol
cheers guys, I guess its just what i enjoy doing really, I try to build each car for diffrent purposes, if im honest at the moment i have took on a little to much hence the 205 will be sold once completed. I also have the 200sx, but in comparision thats really easy to work on, as its simply a case of keeping it mechanically good and forgetting about pretty'ness etc.
I do have a 205 xs project aswell , but ill be chucking that up for sale soon to shift it, cracking motor, and a nonsunroof model aswell so hopefully will sell quite easilly.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.