Log in

View Full Version : ‘86 phase 1



Slammed 66
09-10-2019, 00:02
It’s been a while since I did a ‘my car’ thread so here we go.

For years I’d been pestering my mate to sell me this car and he finally cracked 3 years ago.
A deal was struck and I pretty much bought it as a bare shell with him fitting all the supplied parts to make it a complete car as part of the deal.

So, the interior is a near perfect standard phase 1 interior. I wanted the overall theme to be OE+ so some small changes were made along the way. Seat extension brackets made for the drivers seat to give a little more leg room as I’d always intended doing long road trips in the car. AFR gauge and boost gauge fitted in A pillar mount. Electronic boost controller hidden under the dash flap.

I still had the engine from the old Europarts E plate drag car sat in my garage that mark Calvin had rebuilt for me the year before. It had been in a sorry state when I sent it to him but he turned it round and it’s been the most powerful and reliable C1j that I’ve ever owned. It’s fitted with low compression pistons and a Europarts camshaft. The carb was rebuilt and modified by Jonathan Smith (the previous owner and the top guy that did all the graft for me). The turbo is a T25 from a Saab 9000 2.3 aero with a -31 actuator with 18psi spring. A gt tuning breadbin is fitted with the original cold air feed modified to fit and feeding a gt tuning ram raid induction kit which is housed in a modified air box. The exhaust is a custom 2.5” down pipe mated to a scorpion with 3” tailpipe. Everything has been kept as standard looking as possible under the bonnet to fit in with the OE+ theme. The clutch is just a Volvo 480 turbo unit but has been perfectly up to the task. I’ve not had her on a dunk yet but she runs up to 27psi and certainly doesn’t hang around. I’ve punished it regularly over the 3 thousand miles it’s covered and it’s not missed a beat.

She sits on avo coilovers with adjustable ledas on the back.

I had a set of spare wheels banded to 7j for the front and 7.5 for the rear though in hindsight I should have just gone 7j all round.

That’s it for now. To be fair it’ll be unlikely that this thread gets updated as the car is pretty much as I want it now.


url]

https://i.postimg.cc/mzLRj1w5/28308-C72-B090-46-E2-AB26-415252-E1-E450.jpg (https://postimg.cc/mzLRj1w5)

https://i.postimg.cc/kV9dMRkg/55-B8-E57-E-621-F-401-E-AB8-A-4-F96388-BBDC6.jpg (https://postimg.cc/kV9dMRkg)

https://i.postimg.cc/8JX8bKs7/761-CE793-F339-4635-B6-AB-DC1-A7-CBA32-AA.jpg (https://postimg.cc/8JX8bKs7)

https://i.postimg.cc/21nDf79t/79-A71143-3-B4-F-4275-8260-27-C06-F052-D92.jpg (https://postimg.cc/21nDf79t)

https://i.postimg.cc/WqtVLRxm/8-C2-DD8-F4-5-CAC-4717-A246-42256842-A21-E.jpg (https://postimg.cc/WqtVLRxm)

https://i.postimg.cc/kDh9N4tT/9588-BB38-A67-F-412-A-99-E6-F5370-B59-D600.jpg (https://postimg.cc/kDh9N4tT)

https://i.postimg.cc/LY8KLK4d/ADDF8-D37-F135-4-F5-F-9-C14-E6-CF03911738.jpg (https://postimg.cc/LY8KLK4d)

https://i.postimg.cc/Q9fDyNYx/C6997364-5-D1-B-40-D1-9-E46-0-C4-DB82-CB542.jpg (https://postimg.cc/Q9fDyNYx)

https://i.postimg.cc/RNkB8Ddf/E001-A78-A-1186-43-FE-8-C83-18-EC70-B9-E05-F.jpg (https://postimg.cc/RNkB8Ddf)

https://i.postimg.cc/670x85XL/E1-F955-A3-D994-49-E5-991-A-EDA36-F4671-F6.jpg (https://postimg.cc/670x85XL)