Hi Spec brake pipes

[Chris Hebden]

Hello all! Does anyone know what kind of front flexi's i need for my Hi Spec 4pots on the front?

Ben (Hose Solutions) could you supply a front set?

Cheers Chris

[Coops]

think mine came with braided lines in the kit mate? ring hispec they are quite helpful tbh

[mr bean aka pete]

there quite expensive from hi-spec could try places like a hydralic hose place flash some cash and what length u need and there do it half the price ;)

[Chris Hebden]

there quite expensive from hi-spec could try places like a hydralic hose place flash some cash and what length u need and there do it half the price ;)

LOL i bet they are! Thats what i wanted was the length of them, going to TRY HiSpec see if they'll tell me the length :crap:

[Sy5GTT]

Chris try these.

http://www.merlinmotorsport.co.uk/i12//information.html

[Chris Hebden]

Cheers Sy, good website! For anyone who would like to know there 13inch+ends, so 330mm+ends!

[mr bean aka pete]

if you want the length of a standard hi-spec hose i have my old 1 at work will measure it 2moz for you if you like :) do you want to no the end fittings aswell ??

[Alastair]

Ends are M10 Banjo and M10 female. Merlin made mine up whilst i waited for £30 odd.

Top service.

Oh and ask for the shorter bolts to go with the banjos, and get new 4 copper washers...:agree:

[Chris Hebden]

if you want the length of a standard hi-spec hose i have my old 1 at work will measure it 2moz for you if you like :) do you want to no the end fittings aswell ??

Pete that would be really handy mate, could you give me the complete length from tip to tip and then just to hose length, not including the ends

[Chris Hebden]

Ends are M10 Banjo and M10 female. Merlin made mine up whilst i waited for £30 odd.

Top service.

Oh and ask for the shorter bolts to go with the banjos, and get new 4 copper washers...:agree:

Sounds like a good price, i've been in contact with Ben from Hose Solutions and he's going to knock me a set up and supply the rears as well all for £45 delivered which i thinks a bloody good price! I've told him 330mm length not including the ends so we'll see what Pete measures tomorrow and hopefully thats right!

[mr bean aka pete]

Right Chris measured my old braided brake flexi its 460mm from end to end inc fittings and just the flexi its 308mm from base to base hope this helps mate :)

[Chris Hebden]

Pete your a star thanks mate!