View Full Version : Dini Parts - Garage Days Re-Revisited
... god loves a trier.
As the title states, still looking for the rocker assembly for a R5 Gordini Turbo cylinder head ... and any other gubbins :coffee:
Thanks, Kd
Matt Cole
30-01-2017, 22:44
Karl! Is that really you?
Try Ashy I'm sure he still has a Gordon heed.
I may know of someone, that has one. I'm doing an exhaust for them in a couple of weeks time, and they have quite a few gordini bits knocking about. Are all the rocker assemblies the same?
Karl! Is that really you?
Try Ashy I'm sure he still has a Gordon heed.
Sure is my friend :) Hope your ok, Ive been catching up with your conversion :))) :agree:
Cool, have sent the Toaster a pm :)
I may know of someone, that has one. I'm doing an exhaust for them in a couple of weeks time, and they have quite a few gordini bits knocking about. Are all the rocker assemblies the same?
Hi Matty,
Thank you for the quick reply. Im sure the rocker assemblies are the same - atmo and turbo. However, the pushrods are thicker, and the head is reinforced. I may be able to use the GT followers? Also, Ive missing valves and valves and springs lol.
Ok,I will send him a message and see what he has. :agree:
Just sent him a message on FB now. :agree:
Matt Cole
31-01-2017, 18:55
Hi Matty,
Thank you for the quick reply. Im sure the rocker assemblies are the same - atmo and turbo. However, the pushrods are thicker, and the head is reinforced. I may be able to use the GT followers? Also, Ive missing valves and valves and springs lol.
What you up too Karlos? :wasntme:
Just sent him a message on FB now. :agree:
Cheers Matty :):agree:
What you up too Karlos? :wasntme:
The Gordini T head has been stuck in the garage - along with Ralph - for a few years now. It has been owned by a few old members, though nothing came of it. Would be ideal to fit on Ralph's block, and have a trip over to Scoff's :)
Have a search on this site. I managed to purchase a full Gordini Turbo Engine from Germany a few months back and it was cheaper than some of the heads and rockers that were for sale separately. https://www.leboncoin.fr/annonces/offres/ile_de_france/
Have a search on this site. I managed to purchase a full Gordini Turbo Engine from Germany a few months back and it was cheaper than some of the heads and rockers that were for sale separately. https://www.leboncoin.fr/annonces/offres/ile_de_france/
Thank you Lee, will have a look :)
Some parts here, with postage to UK.................
http://www.ebay.co.uk/itm/Rampe-culbuteurs-Renault-R5-alpine-turbo-atmo-/192096237356?hash=item2cb9d3f72c:g:F6UAAOSwNnRYldb a
iMessages the guy I know, and he has a rocker assembly, but was keeping it for a spare. He is after a water pump pulley with the 3 holes in which might persuade him to part with the rocker. :laugh:
iMessages the guy I know, and he has a rocker assembly, but was keeping it for a spare. He is after a water pump pulley with the 3 holes in which might persuade him to part with the rocker. :laugh:
lol Swap Shop, thank you for messaging the guy. Unfortunately, I don't have a dini water pump, nor, to swap ... The head has been modded to use the GTT pump :)
Hi Matty,
Thank you for the quick reply. Im sure the rocker assemblies are the same - atmo and turbo. However, the pushrods are thicker, and the head is reinforced. I may be able to use the GT followers? Also, Ive missing valves and valves and springs lol.
The gordini followers are a different size to the gtt followers from memory.
Followers have been produced in the past by Newman Cams. I purchased a set when Andy Cooke had Newman produce a few sets, this was around 10 years ago, price was a lot less than Renault.
I sold all my Gordini turbo parts and new followers to Tony "Fish head" if he is still on here it might be worth a try.
The gordini followers are a different size to the gtt followers from memory.
Followers have been produced in the past by Newman Cams. I purchased a set when Andy Cooke had Newman produce a few sets, this was around 10 years ago, price was a lot less than Renault.
I sold all my Gordini turbo parts and new followers to Tony "Fish head" if he is still on here it might be worth a try.
Hi Lee, thank you for the info :) I'll track down 'Fish Head' and send a message. Not spoke to Andy for a few years, I'll surprise him with an email :)
lol Swap Shop, thank you for messaging the guy. Unfortunately, I don't have a dini water pump, nor, to swap ... The head has been modded to use the GTT pump :)
Haha, I think with parts being so hard to come by he's reluctant to get rid of any spares without replacing them with other parts he needs. When I hand him my invoice, he may be willing to sell some parts. :wasntme:
Another excellent contact for Alpine or Cleon motor parts is JL Engineering based in London. (Look them up on facebook) They specialise in all classic Renault and have helped to source and provide parts for my Turbo 2. I know when i last spoke to John less than a week ago, he was having some Cam followers made in Germany as Renault no longer supply and the available items from France were not of very high quality.
He also has some very interesting builds ongoing that are worth a read
Another excellent contact for Alpine or Cleon motor parts is JL Engineering based in London. (Look them up on facebook) They specialise in all classic Renault and have helped to source and provide parts for my Turbo 2. I know when i last spoke to John less than a week ago, he was having some Cam followers made in Germany as Renault no longer supply and the available items from France were not of very high quality.
He also has some very interesting builds ongoing that are worth a read
Cheers for the info :) http://www.renaultalpine.co.uk/viewtopic.php?f=8&t=7047
In work at the mo, wouldn't mind looking at the dimensions: GTT vs. Alpine/Dini followers :)
Rocker Assembley Sorted - Cheers Golden Fingers :)
Plugs and head bolts - Sorted
Just uprated springs and retainers to source/buy :):coffee:
Matt Cole
06-03-2017, 11:40
Karl,
Any chance of a project thead?;)
Karl,
Any chance of a project thead?;)
Of course m8 :) ... will do when things get in place :) :agree:
Of course m8 :) ... will do when things get in place :) :agree:
I declared that the project would take time lolz
Matt Cole
12-04-2017, 21:37
An introduction would be a start!:D
An introduction would be a start!:D
lol ;) :P
31064
Matt Cole
13-04-2017, 16:38
That's the most progress in years KD!:wasntme:
That's the most progress in years KD!:wasntme:
:cooter: haha :P
Did you have any luck getting the bits you need?
Since doing a bit of work on a a Gordini engine, I'm going down that route myself and after some parts. Lol
Did you have any luck getting the bits you need?
Since doing a bit of work on a a Gordini engine, I'm going down that route myself and after some parts. Lol
Hi Matty,
I've managed to source all parts, but, 1x long pushrod and 1x short pushrod.
Its been a task sourcing individual parts ... good luck
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.