Log in

View Full Version : R5GTT Engine Undertray


Lowiepete
08-03-2016, 14:37
Hello Folks,

I had hoped that my local stealers had one in their treasure trove, but it wasn't
to be as they'd had a clear-out. So, now I have a tidy engine bay and clean
gearbox, I'd like to help keep it that way.

Regards,
Steve
Matt Cole
08-03-2016, 15:11
I could do with one too steve although I will not pay a ridiculous amount for a lump of plastic sheet.
clarky_gtt
08-03-2016, 20:19
I'm not sure I've ever seen one!? I'd be interested for me resto project too
Gtturbo
08-03-2016, 23:09
I have fitted one on mine but I am 99% sure GT's never came with them fitted and their a retro fit from another model.
Lowiepete
08-03-2016, 23:23
I have fitted one on mine but I am 99% sure GT's never came with them fitted and their a retro fit from another model.
What happened was the mechanics doing the PDRs would remove them and not
replace them. Apparently, our local stealers had several of them in their loft, but
someone had a clearout and they went...



...to the dump :cartman:



As for paying loadsamoney, what I might end up doing is getting one fabricated
from sheet aluminium, it might be a cheaper option.

BTW, if at some point you get the chance, it would be good to see a picture of
what it looks like in place and where its fixings are. :cool:

Regards,
Steve
Trevhib
09-03-2016, 10:53
There's definitely a thread about these somewhere with pics and discussion on fitment.

Will have a look around :agree:

Paul is right, these weren't factory fit on GTTs.
Matt_S
09-03-2016, 16:15
I might have an ask about other 5s//Extra/Clio 1s at the dealer.
Lowiepete
09-03-2016, 16:23
I might have an ask about other 5s//Extra/Clio 1s at the dealer.
A part # would be very useful Matt :niceone:

Regards,
Steve
Charlie
09-03-2016, 20:40
A couple of pics of the cover, I bought this off renault. Very simple to fit 4 bolts hope this helps.

Cheers Charlie
Matt Cole
09-03-2016, 21:14
A couple of pics of the cover, I bought this off renault. Very simple to fit 4 bolts hope this helps.

Cheers Charlie

Nice one Charlie. Any idea of the part number? Wonder why the gt didn't have these fitted? Maybe heat.
Charlie
09-03-2016, 22:02
Nice one Charlie. Any idea of the part number? Wonder why the gt didn't have these fitted? Maybe heat.

I kept all my invoices so should have it, I will check and post asap. Not sure why they weren't on the turbo but nice job when fitted and no problems with over heating.
tubbyG
09-03-2016, 23:23
Some info in this :agree:

http://www.rtoc.org/boards/showthread.php?t=36662
Trevhib
10-03-2016, 10:53
Bang on again Graeme! :smokin:

I searched yesterday on a few keywords. Guard and sump weren't in my list :cartman:
Trevhib
10-03-2016, 10:57
http://www.rtoc.org/boards/attachment.php?attachmentid=18095&d=1394905281
Trevhib
10-03-2016, 11:00
Drat, as the other thread says, no listing for GTT's so no part number in our Dailogys section:

http://www.rtoc.org/boards/showthread.php?t=40475
Matt_S
10-03-2016, 14:37
They'll be a part number on that under tray.
Charlie
11-03-2016, 17:07
The part number is 7700764094, i got this off the guard if needed i can look up the invoice.
Lowiepete
11-03-2016, 23:48
The part number is 7700764094, i got this off the guard if needed i can look up the invoice.
...and they are still available from France... :niceone:

Regards,
Steve
Trevhib
12-03-2016, 09:32
I'll update our Dialogys page :)

Edit - done: http://www.rtoc.org/boards/showthread.php?p=398107#post398107
Charlie
12-03-2016, 14:57
...and they are still available from France... :niceone:

Regards,
Steve
Glad to be of help.

Charlie
Matt Cole
12-03-2016, 15:03
How much are they?
Lowiepete
12-03-2016, 16:48
How much are they?
About £85 without the fixing kit - that's another £10 or so.
I think that #2 in the Dialogys system might be a bit better,
as that seems to have better drain hole positions. Not sure
how much they are - need a Part #...

Regards,
Steve
James5
12-03-2016, 17:18
I've got a clio 172 one here not sure if that would fit needs a bloody good clean though
Matt Cole
12-03-2016, 20:56
I've got a clio 172 one here not sure if that would fit needs a bloody good clean though

Any pics James?
James5
13-03-2016, 11:24
172 phase 2 attached it's only held on in the corners with 10 mm bolts, the rest of it catches the lips of the subframe. The big hole in it allows access to the sump bolt
Charlie
13-03-2016, 16:37
I think I only paid about £36 for mine, the fixing kit is only 4 speed clips and 4 bolts.
Matt_S
13-03-2016, 17:19
I've found some of these for sale.
phase i 16 v turbo
21-03-2016, 09:47
They also come fitted on cars with two other sections over the wish bones.
Lowiepete
21-03-2016, 14:45
They also come fitted on cars with two other sections over the wish bones.
Mike, thanks, I've had those pieces for ages. Happily I bought them before their
prices went astronomic :eek:

Having got the gearbox looking like a work of art, I'm hoping these pieces will help
keep it cleaner for longer.

Regards,
Steve