Will a tomcat T25 fit a standard 5 elbow?

[Jimmy_GTT]

The standard elbow has 4 holes.
The tomcat turbo housing has 5, but I think only 3 will allign with the elbow holes.
Is an adapter necessary?
I've sold a tomcat and the guy called me that they can not fit the standard elbow.
I was using it with a custom downpipe bought from the club.
Thanks

[R5MJH]

yes they do but one hole wont line up and you put a spacer and a washer on the hole that dont have a dedicated location hole

i know we had one:agree:

[Jimmy_GTT]

yes they do but one hole wont line up and you put a spacer and a washer on the hole that dont have a dedicated location hole

i know we had one:agree:

Sorry. Where to put what? I do not really understand.
As I understand I shall put a spacer and a washer to the hole on the elbow which doesn't line up with any hole on the turbine housing. But what will that spacer do?
How will it be fastened to the turbo housing?

[R5MJH]

if its a proper t25 tomcat 3 bolts will line straight up keep spinning until they do, the 4th hole on the elbow wont line up but if up look on the rear housing there will be a bolt hole that dont go anywhere, put a cut metal spacer and big washer on bolt so it clamps the elbow down, total of 4 bolts, its easy but when i sold my tomcat the guy didnt understand either but we hot there in the end

its deffo a t2 standard elbow thought isnt it?

[Jimmy_GTT]

if its a proper t25 tomcat 3 bolts will line straight up keep spinning until they do, the 4th hole on the elbow wont line up but if up look on the rear housing there will be a bolt hole that dont go anywhere, put a cut metal spacer and big washer on bolt so it clamps the elbow down, total of 4 bolts, its easy but when i sold my tomcat the guy didnt understand either but we hot there in the end

its deffo a t2 standard elbow thought isnt it?

It seems that you shed light on. Many thanks!

But if someone would have a picture about that please post it here.

Thanks