Dimensions of a GT Turbo

[JRP]

Hi all would anybody mind carefully measuring their 5 GTT from front to back and width.

I have permission to have the gt turbo in the garden in a wood garage/shed.

But it's tight.

Thank you all, btw no Haynes etc to hand

[JRP]

Hi all would anybody mind carefully measuring their 5 GTT from front to back and width.

I have permission to have the gt turbo in the garden in a wood garage/shed.

But it's tight.

Thank you all, btw no Haynes etc to hand


I Wikipedia 'd it they are as follows


Dimensions
Wheelbase 2,407 mm (94.8 in) (3-door)
2,467 mm (97.1 in) (5-door)
Length 3,591 mm (141.4 in) (3-door)
3,651 mm (143.7 in) (5-door)
Width 1,584 mm (62.4 in)
Height 1,387 mm (54.6 in) (3-door)
1,397 mm (55.0 in) (5-door)
Kerb weight 695–840 kg (1,532–1,852 lb)

If not needed mods feel free to delete

[Trevhib]

I'm sure I've seen this discussed before but then I've been here so long that it could be 10+ years ago :laugh:

The club lost a lot of data prior to 2008 anyway so it's good to go round some things again to ensure we have it. I did a search on the boards using 'dimensions' in the thread title and nothing like this came up. :agree:

[JRP]

I'm sure I've seen this discussed before but then I've been here so long that it could be 10+ years ago :laugh:

The club lost a lot of data prior to 2008 anyway so it's good to go round some things again to ensure we have it. I did a search on the boards using 'dimensions' in the thread title and nothing like this came up. :agree:

Trust me I used search 😉

[swinny]

Are these dimensions just to the hubs? Or outer of the wheels? Width wise...

Im wondering if a gtt will go on my mates brian james 10x5....

Its actually 5'9" wide so going off the dimensions above should fit but only if dimensions to outer of wheel, cheers