PDA

View Full Version : universal accelerator cable



Cr23g
29-05-2015, 11:57
Done a load of searching but can't find any answers on this.
Bought the new kit that comes with bits for both the ph1 and ph2, (mines a ph2) supposed to get instructions with it but with my luck i didn't get one.
in what order does the bits go in/ what bits do i need?

and how have you guys got the cable routed as iv read a few threads that explain it differently.
currently got it coming out into engine bay through the hole behind accelerator pedal, and iv got about half a meter of excess cable.

thanks

http://i.ebayimg.com/00/s/NzY4WDEwMjQ=/z/hqAAAOxy8HlSb~48/$(KGrHqZ,!lIFJn2h6KPiBSb+48ZIjw~~60_57.JPG

Trevhib
29-05-2015, 12:56
Exploded throttle cable diagram in the same place as the other dialogys diagrams for your fuel tank set-up question previously. I think you trim the cable to the length that suits but best to check what other people have done as regards routing.

Dialogys pics:
http://s88.photobucket.com/user/paulb69_2006/library/dialogys?sort=3&page=1

Throttle cable:
http://s88.photobucket.com/user/paulb69_2006/media/dialogys/1120M0FB_1.png.html?sort=3&o=156

:agree:

http://i88.photobucket.com/albums/k168/paulb69_2006/dialogys/1120M0FB_1.png

Trevhib
29-05-2015, 13:05
Also found these threads which have pics of the pedal end, where it goes through the bulkhead and the connection to the carb.

http://www.rtoc.org/boards/showthread.php?t=20592

http://www.rtoc.org/boards/showthread.php?t=29198

Where were you searching?? :confused:

Lol.

Think all you need to do is find some engine bay pics that show the cable loops round.

michael tierney
29-05-2015, 20:56
if u can reuse the outer cable and feed the new inner one through it......your much better off;)

Nottswoody
29-05-2015, 22:29
if u can reuse the outer cable and feed the new inner one through it......your much better off;)

What he said mines been sound since I did it this way

Cr23g
30-05-2015, 19:33
cheers trev, i don't know, obviously in all the wrong places :ashamed:
i would of re used the old sheeve but i binned the cable around 6 years ago when i started stripping it because I'm smart..

Trevhib
30-05-2015, 21:21
:agree::)