PDA

View Full Version : My Pearly Phase 1 on the Rollers


1988cab
03-02-2015, 14:01
Had my phase 1 on the rollers this morning, thought it would make around 160@flywheel but it made 198bhp with 207 torque at about 19psi at the carb top! Well happy with that :) thought it was going well!! Must be this cold weather helping
1988cab
03-02-2015, 14:06
:)
1988cab
03-02-2015, 14:07
:agree:
Scoobykilla
03-02-2015, 14:16
Impressive what mods you got??
1988cab
03-02-2015, 14:32
Here's a list of mods
Piper 285 cam
Garrett T25 rollerbearing
2 1/2" downpipe
2 1/4" ktec exhaust
Gt tuning double cap
Fettled carb 1.3main 1mm air corrector 2nd stage drilled out to 1.2
Been getting 11.8 on the Afr at wot seems to be running sweet :burnrubber:
Mattw
03-02-2015, 15:45
Nice work bet she does go well :agree:
1988cab
03-02-2015, 15:57
Here's a small vid of her on the dyno
http://www.youtube.com/watch?v=nJWaybybSZk&sns=em
1988cab
03-02-2015, 16:00
Nice work bet she does go well :agree:

Thanks, yeah she's a bit of a goer:) was interesting on the way there this morning with all the ice we've had down ere
Tutuur
03-02-2015, 16:16
Good result mate, especially for only 19 psi!
1988cab
03-02-2015, 16:21
Good result mate, especially for only 19 psi!
Thanks mate, yeah that's if the gauge is acurate! It flutters around quite a bit :crap: I might move it to the carb base? Should be better??
Trevhib
03-02-2015, 17:54
Way, that's a good result. As the others have said, she must be quick :agree:
Nad-5GTT
03-02-2015, 18:00
you should be well pleased with that result fella. Nice looking 5 by the way😉
1988cab
03-02-2015, 18:26
Way, that's a good result. As the others have said, she must be quick :agree:

Yes Trev quick enough for me! I don't know how you would get the power down with over 200bhp! It's all over the road as it is!! Maybe I need better tyres or better driving skills :laugh:
1988cab
03-02-2015, 18:28
you should be well pleased with that result fella. Nice looking 5 by the way😉

Cheers dude! Still a few little jobs to get done like fit a phase 1 bumper and a few tidying bits:cool:
Mattw
03-02-2015, 20:12
I run r888 and found I hardly get spin now just launch but add a bit of damp road holy bjesus hold on lol
1988cab
04-02-2015, 18:00
I run r888 and found I hardly get spin now just launch but add a bit of damp road holy bjesus hold on lol

Ha ha yeah when the boost kicks in and you zig zag down the road:) you gotta love em! So much fun!!:D
Mattw
04-02-2015, 18:09
:burnrubber:
beng
20-02-2015, 19:11
New poster! (less than 10 posts)

That's a really nice looking phase 1. It's nice to know that you can make 200hp with a side mount ic. I have a massive front mount on the car I just bought and personally don't like it. I want a nice side mount so I can fit a standard bumper on. Good work mate
1988cab
20-02-2015, 19:22
New poster! (less than 10 posts)

That's a really nice looking phase 1. It's nice to know that you can make 200hp with a side mount ic. I have a massive front mount on the car I just bought and personally don't like it. I want a nice side mount so I can fit a standard bumper on. Good work mate

Thanks mate! It's a Gttuning bread bin I think there probably the best standard position inter cooler you can get although I did suffer a bit of heat soak on the second dyno run! Probably get a bit more air flow on the road though as the fan at the dyno was quite small.
I think side mounts are ok for road use but if your thrashing it round the track a front mount is defiantly better! The cosie cooler behind the grille seems like a good bet!:agree:
Trevhib
21-02-2015, 11:44
New poster! (less than 10 posts)

That's a really nice looking phase 1. It's nice to know that you can make 200hp with a side mount ic. I have a massive front mount on the car I just bought and personally don't like it. I want a nice side mount so I can fit a standard bumper on. Good work mate

There are front mounts that fit behind the standard bumper (leaving it looking OE from the outside), the best of both worlds :)
beng
21-02-2015, 13:31
New poster! (less than 10 posts)

I shall look into the cossie fmic, it sounds ideal. My huge ktec effort will be for sale shortly
Trevhib
21-02-2015, 17:03
I think there are bigger and better ones than that too Beng. There have been loads of projects on here fitting various FMIC's behind OE bumpers. Difficult to know what to search on to find the pics/advice though.

I do remember Bood's car had a brilliant Cossie FMIC mod:
http://www.rtoc.org/boards/showthread.php?t=29689&page=3
1988cab
22-02-2015, 14:20
I'm thinking about a front mount behind the original bumper now:) Then I can put the air filter in place of the old cooler win win :agree:
Jonny5
22-02-2015, 15:35
New poster! (less than 10 posts)

I shall look into the cossie fmic, it sounds ideal. My huge ktec effort will be for sale shortly

I have one for sale if you're interested.
Has already had all mods required for it to bolt to a 5.
Pm me if you're interested only want £30 posted.
newbstar*
01-03-2015, 21:28
The engine I built, and my old car. Ported head, ported inlet, 25 degree angle on valves and updated h.gasket. Helix paddle clutch also valeo green box cover. :agree:
1988cab
02-03-2015, 19:43
The engine I built, and my old car. Ported head, ported inlet, 25 degree angle on valves and updated h.gasket. Helix paddle clutch also valeo green box cover. :agree:

Hey mate! Yep that's your old car :) different engine though!! Put a different one in after a few probs:agree: still got the paddle clutch that's excellent