What turbo?

[Aterro]

Hi,

My turbo gasket is leaking and I want some more power!

What turbo spec would you recommend getting?

I don't want lag, and want more punch 20-90 mph

I currently have a 285 cam also.

Any recommendations?

[Matt Cole]

Hi,

My turbo gasket is leaking and I want some more power!

What turbo spec would you recommend getting?

I don't want lag, and want more punch 20-90 mph

I currently have a 285 cam also.

Any recommendations?

Tried and tested T25 with a .48 rear housing and 360degree thrust bearing! Should fully spool at 3500rpm and keep you going beyond 7500rpm.

You could go for a t2/t25 hybrid and spool earlier but your cam wouldn't benefit greatly.

Lots of info on past threads using the search function.;)

[Matt Cole]

Try CR turbos if you are wanting a quote.:agree:

[Aterro]

Try CR turbos if you are wanting a quote.:agree:



Hi, thanks!
That's also the info I was after! As rang a few turbo companies and they aren't helpful at all!

Regards

[danr5Gtt]

New poster! (less than 10 posts)


Hi, thanks!
That's also the info I was after! As rang a few turbo companies and they aren't helpful at all!

Regards

They are good, did mine in three days.:agree::)

[evogill]

that's the same power band I wanted .marky mark rebuilt my engine with 270 cam and t2/25 turbo, I went to crturbo ,absalutly brill, sent an old turbo. wasn't any good..was a brill company for advice and service. £620 delivered,still runnin in till my carb issue