Why has my speedo stopped working?

[stu21t]

It was working fine them just stopped.
I've tried a different set of clocks, it's not that.
Unplugged the joint and cleaned it up, still not working.
It feels like it's in the gearbox properly
What's next to check?

[RussellT]

in my experience sack the joint and join the wires with a simple block conector.

[Mr Raider]

Get the pick up out of the gearbox, held in by a small bolt/clamp near the exhaust downpipe. It might need a clean up ;).

[Alex]

Clean up or replace the connection near the air filter/suspension turret and clean up the connection at the back of the clocks. If it still doesn't work inspect/replace the sensor itself. :)

[stu21t]

Cheers guys, will take a look.

[RussellT]

Honest sack that black connector, its poo, before you do anything else, easy job to do.

[stu21t]

Yep will do that this weekend.
Can I test the connector at the dash end at all?

[rabbitstew]

Guess only way to test the connector would be to use a continuity tester or test lamp to check the wiring from the engine bay connector through to the back of the speedo.

My speedo has been flakey for ages so i need to do the same at some point. It comes to life if i wiggle the wires in the engine bay, so i think i will just replace the wiring with some new stuff.

[RussellT]

my advice is dont touch anything until you have changed the connector. If it still doesnt work then look elsewhere.