PDA

View Full Version : Lots of parts



JRP
07-07-2014, 22:11
Green cotton air filter barely used £40
Carb working from my old engine £80
Front mount £70
Set of ignition leads new £15
Powder coated black rocker cover £50
Rocker cover gasket £5
Alloy carb top new £50


All in Surrey can all go at once if you like ;)

Also have spare drive shafts, electrics, block etc

Std wheel center caps x 15

Collection preferred can deliver at extra cost.

JRP
07-07-2014, 22:13
My photos keep failing, if required I'll text pictures across to you, can't upload from I phone :(

Bigfoot
07-07-2014, 23:02
Can you let me know on price delivered for accelerator cable, plugs, oil return pipe, 2 centre caps, and if the leads are original leads all delivered please.

Jonny5
07-07-2014, 23:17
Sparks still avaliable jrp?

JRP
07-07-2014, 23:19
If fail doesn't have them they will be, just waiting on communications.

JRP
07-07-2014, 23:20
Sparks still avaliable jrp?

Now sold

Dre5gtt
07-07-2014, 23:29
How much for the clutch cable delivered mate :agree:

Dawsie
08-07-2014, 08:42
Pm'd you mate

bood
08-07-2014, 09:46
What front mount do you have please?

JRP
08-07-2014, 09:52
It's a toyo I think, it's brand new. See attached pic.

If your interested in it I also have some brand new black samco's I had mocked up to make the run and fit the ends etc. obv a tad more onto the list price ;)

fat roofer
08-07-2014, 10:42
Alright mate, have you still got my number? I might pop past and pick some centres up and maybe have a root through.....

Thanks

Steve

JRP
08-07-2014, 12:28
Alright mate, have you still got my number? I might pop past and pick some centres up and maybe have a root through.....

Thanks

Steve

I'm useless with numbers, stuffs going quick but your more than welcome to have a look.

Call me i'll get the brew on

JRP
08-07-2014, 12:28
What front mount do you have please?

Core size is

65mm
140mm
540mm

JRP
08-07-2014, 12:45
I Have Just come across more parts Pictures again I can text over (at my expense)

Ph1 front shocks and springs, from a cup car £80ono
Chrome top rad hose tee in for water temp sensor £10
Selection of gaskets for bottom end inc cork sump gaskets £10 the lot (pic added) SOLD
Braided Turbo oil feed pipe £30 (no filter) SOLD
Genuine Renault oil filter £8 (unsure of price ??) SOLD
Steering Colum bush £10
Black plastic poppers to hold inner arch plastics on £5 posted (7 in total)
Stripped cleaned and painted block (stood in garage for 4 years) ready to build £25 (no postage)

Standard painted exhaust manifold looks good £10
Mini plastic clips to loop parcel shelf string round £5
Rocker cover nuts Genuine Renault £5
Shiney brass New Renault dizzy clip £5 £SOLD

Gear box from a runner £75

Genuine Purflux air filter for air box (still in box) £10?

Header tank like new little clean req, with blue cap + yellow sticker £25

Tow eye cover £10 SOLD

Shiney bling large OD/ID intercooler pipe work bends and straights whole box £50

Again all in surrey Pictures on request.

Jimmy5
08-07-2014, 13:47
Will take gaskets - will pm details

Nad-5GTT
08-07-2014, 14:25
Could you take some measurements of the air filter please, diameter, length and diameter off the joint hole. Many thanks Neil.

fat roofer
08-07-2014, 14:29
I'll defo take the towing eye cover too mate, pm me your number and I'll give you a shout! Cheers mate,

Steve

JRP
08-07-2014, 14:42
I'll defo take the towing eye cover too mate, pm me your number and I'll give you a shout! Cheers mate,

Steve

Sold sorry

fat roofer
08-07-2014, 17:57
Sold sorry

No probs mate, pm me your number and I'll bell you about a visit anyhow.

JRP
09-07-2014, 14:21
All parts shipped today to people who have paid me up.

Tracking receipts can be photo'd and texted over.

J

JRP
09-07-2014, 17:00
Could you take some measurements of the air filter please, diameter, length and diameter off the joint hole. Many thanks Neil.

It's id of the connection is 54mm

That's top of my head I'd have to have a measure, at a guess 28/30cm long and diameter roughly 150mm

Nad-5GTT
09-07-2014, 19:44
Cheers jrp, I'm boxing in behind the headlight so would need exact measurements as its a little tight in there. I'll go have a measure up when I've got time with your guesstimations:D

JRP
09-07-2014, 20:07
Cheers jrp, I'm boxing in behind the headlight so would need exact measurements as its a little tight in there. I'll go have a measure up when I've got time with your guesstimations:D

I'll get accurate measurements, look through JRP jerpa jerpa back in the game thread,

Has a few bay pics from above and it shows how filter sat.

JRP
09-07-2014, 20:13
http://www.rtoc.org/boards/attachment.php?attachmentid=4690&d=1260808280

JRP
09-07-2014, 20:13
http://http://www.rtoc.org/boards/attachment.php?attachmentid=4690&d=1260808280

http://www.rtoc.org/boards/attachment.php?attachmentid=4690&d=1260808280

JRP
09-07-2014, 20:15
http://www.rtoc.org/boards/attachment.php?attachmentid=5942&d=1271431625

Nad-5GTT
09-07-2014, 21:20
Cheers for the pics bud, I think it looks a bit too long :crap: mines a perfect fit but it has split at the end :cry: my measurements are 210mm in length including the flange(ohh err) the bit the jubilee clip goes round. Dimensions are 140 going to 100mm. And a 63mm hole for the hard pipe. Anything over 210mm and its a no go for me. Could you just confirm this for me that it is too big, cheers jrp.
Pic of mine

Dre5gtt
09-07-2014, 21:58
Nad is that a Jetex filter ? As they were taking them back and replacing them as it was a big thing with them splitting round the neck, happend on my s3 and there customer service is spot on got an exchange.
They have since changed the design to :agree:

Nad-5GTT
09-07-2014, 22:02
Alright dre, I think it's a JR filter. Bought it donkeys years ago so don't think I'll have any comeback now :laugh: but it's annoying as the filter itself is in great condition.

jermaine666
09-07-2014, 23:50
How much for the intercooler with the pipes

JRP
10-07-2014, 17:32
Intercooler and Samco all in £120 posted any takers?

JRP
10-07-2014, 20:58
Working carb £55 posted

JRP
10-07-2014, 21:00
Rocker... £40 £45 posted

JRP
10-07-2014, 21:01
Rad + spal fan £90

Bigfoot
11-07-2014, 12:36
Received the parts :agree: cheers for those items

JRP
11-07-2014, 12:39
Filter size is 250mm long by 120

JRP
11-07-2014, 13:58
What's this gem worth?

http://www.rtoc.org/boards/attachment.php?attachmentid=19117&d=1405083522

JRP
11-07-2014, 14:00
Back.

http://www.rtoc.org/boards/attachment.php?attachmentid=19118&d=1405083607

JRP
11-07-2014, 17:32
Pic added

JRP
11-07-2014, 17:33
Another added

Dre5gtt
11-07-2014, 17:39
Got all the bits today mate, nice one :agree:

JRP
11-07-2014, 18:36
Good stuff

JRP
14-07-2014, 10:49
Spal fan and mounting kit £50 posted

Pigsnake
14-07-2014, 22:27
Pm for you mate.:agree:

R5DANGTT
21-07-2014, 04:38
New poster! (less than 10 posts)

Do you have any alloy wheel center caps left? If so can I have 4 please. How much posted? Or where abouts in surrey are you?
Thanks.

LeeR5GTT
10-08-2014, 10:34
Pm sent mate

bood
10-08-2014, 20:30
the rad is that the standard width still?

thanks

Tuck
19-12-2014, 01:21
New poster! (less than 10 posts)

You still got the carb

Charlie
19-12-2014, 22:03
Can you give me price for two centre caps + postage to BT63 5NQ N.Ireland.

JRP
19-12-2014, 22:09
Sorry all parts gone.

Mr Raider
20-12-2014, 21:14
Ah, even rocker cover nuts?! :(