Reconnecting oem boost gauge

[fastevo1]

I'm assuming it's just a straight vac pipe to the rear of the cluster for this to work again?

I think the original feed was used for the aftermarket gauge.

[Brigsy]

Pipe goes from drivers side of carb top to o.e boost gauge.

[fastevo1]

Pipe goes from drivers side of carb top to o.e boost gauge.

Cheers

Does it enter drivers side or passenger side bulk head?

[LeeR5GTT]

Cheers

Does it enter drivers side or passenger side bulk head?

Drivers mate with the speedo cable

[fastevo1]

Drivers mate with the speedo cable

Cheers

[Chris Beer]

As above ..

There is a plastic connector on the bulkhead, if it's there but unconnected then run some vac hose to carb top and should be sorted :agree:

[fastevo1]

As above ..

There is a plastic connector on the bulkhead, if it's there but unconnected then run some vac hose to carb top and should be sorted :agree:

Don't suppose you have a pic or can point it out on another pic?

These Hayes manuals are useless!!!!!

[fastevo1]

As above ..

There is a plastic connector on the bulkhead, if it's there but unconnected then run some vac hose to carb top and should be sorted :agree:

Found it!

Cheers.

[Trevhib]

Take a pic and post it on here for future :agree::)

[fastevo1]

Here we go, directly behind the carb coming from the bulkhead.

http://i18.photobucket.com/albums/b149/ant123456/Mobile%20Uploads/image_zps5eeda4f6.jpg (http://s18.photobucket.com/user/ant123456/media/Mobile%20Uploads/image_zps5eeda4f6.jpg.html)

[Trevhib]

Nice one :) It's in an awkward little place :study: