New starter motor wiring

[Gtturbo]

Hi all, fitting a new starter motor but the wiring terminals are slightly different.

My main questions is where does the solenoid wire fit? There is no push fit clip connector as on my old one. Do I fit a round earth connector to my solenoid wire and does that fit to the right round terminal? Also are my battery and alternator wires on the correct terminal as per the below photo.

Thanks in advance.

http://i204.photobucket.com/albums/bb195/mossyv6/Renault%205%20GTs/imagejpg1_zps094b3a62.jpg (http://s204.photobucket.com/user/mossyv6/media/Renault%205%20GTs/imagejpg1_zps094b3a62.jpg.html)

[Trevhib]

Strange.

Some info here:
http://www.rtoc.org/boards/showthread.php?t=34879

Some info here:
http://www.rtoc.org/boards/showthread.php?t=33341

Not sure if either will fully answer your questions but there are a fair few threads in the search results if you do a search on 'starter motor' and use the 'thread titles' option. :agree:

Difficult to see from the pic but isn't there a spade connection just above the left terminal?

[Gtturbo]

Thanks for your help Trev for this.

I have found the connector it rights underneath. :):):)

[Trevhib]

:):agree: