Subframe Attachment Bolts

[Woznaldo]

Hey Guys and Girls, I don't have access to my car for the next day, but wanted to know both the size and torque loading for both front and rear Subframe a Attachment Bolts.

This way I can grab the right tools before I go.

Thanks all.

[Goobie]

I think the fronts are 16mm and 18mm rear. Not sure what the torque setting is. :)

[CoooL]

16 18 and 13 on the supports.. :)

[Goobie]

Not sure this is of any help as I can't find anything on the subframe torque settings, but the engine mounts are listed at 40 Nm ( 30 lbf ft.) and the lower arm pivot are 90 Nm ( 66 lbf ft.). :agree:

[Woznaldo]

Thanks Guys, rain stopped play, but i'm going to take a look tomorrow. I'll confirm sizes at the same time and may just apply a generic torque for the thread size?

[Nad-5GTT]

and may just apply a generic torque for the thread size?

I like to call it FT :D

[Goobie]

I like to call it FT :D

I don't think FT has a film PG rating. ;) :laugh:

[Woznaldo]

Just thought I'd let everyone know that I used the torque figure from the Clio Subframe bolts and the sizes were:

Front - 16mm (62Nm)
Rear - 21mm (105Nm)