PDA

View Full Version : Headgasket from gsf


gttjames
13-01-2009, 19:18
Emailed gsf about there headgasket, and they said the gasket they sell as 'uprated', and the kit they sell for less is the same gasket.

They also told me both gaskets are 1.4mm thick, arnt the 'uprated' gaskets 1.9mm?
raj
13-01-2009, 19:24
i also emailed gsf and asked if there was any difference between the head gasket and the headgasket in the headgasket set? i also asked why the headgasket was more expensive than the headgasket set.!

i got a reply email which basically said, "we dont know the reason why the headgasket set is cheaper than the single headgasket" :jerkoff:
who else is supposed to know:rolleyes:

how ever i do know that the meillor gaskets are 1.9mm
Brigsy
13-01-2009, 19:44
I thought everybody had already told you that it was the same gasket :rolleyes:

As for asking why the headset is cheaper, that's a reason for them to up the price for sure..
gttjames
13-01-2009, 20:30
yer the reply i had they said it was a cortco gasket, 1.4mm

Not sure weather my heads been skimmed or not but i think il go with the 1.9, anyone know anywhere else to get it from other than cgb?
Scoff
13-01-2009, 20:32
GSF are wrong, it is 1.9mm.
Sparkie
13-01-2009, 21:10
there are two types of corteco gasket, the thicker one has a graphite coating on it. but its about twice as expensive as the normal one. the part number is the same but ends in an 'R' instead of a P?
raj
13-01-2009, 21:13
there are two types of corteco gasket, the thicker one has a graphite coating on it. but its about twice as expensive as the normal one. the part number is the same but ends in an 'R' instead of a P?

i remember you telling me this, ive mentioned it a few times. im assuming that this would be the one that bbpt use.
Scoff
13-01-2009, 21:48
but still the blue meillor that comes with the kit or on its todd is 1.9mm. 1.4mm sounds more like the n/a gasket I used to run, or was that 1.2mm ? god knows.
gttjames
14-01-2009, 19:22
apparently this is the 1.9mm gasket

R11102
Scoff
14-01-2009, 23:06
apparently this is the 1.9mm gasket

R11102

yes, thats the code for the uprated type, the same one comes in the kit.
Mart
14-01-2009, 23:57
R11102

:laugh:

Not seen that posted in a while. I'll have to start that gag up again :D
gttjames
15-01-2009, 17:43
F it, might just order from cgb, paying more but atleast you know what you get:laugh:

dont want to order a gasket set that iv been told by gsf comes with a 1.4mm gasket
The new Bill J
15-01-2009, 17:51
F it, might just order from cgb, paying more but atleast you know what you get:laugh:

dont want to order a gasket set that iv been told by gsf comes with a 1.4mm gasket

How many people do you want to tell you that that IS the gasket you're after? :rolleyes:
Scoff
15-01-2009, 17:54
F it, might just order from cgb, paying more but atleast you know what you get:laugh:

dont want to order a gasket set that iv been told by gsf comes with a 1.4mm gasket


your having a laugh right ? why the bloody hell do I waste my time on this forum.
Brigsy
15-01-2009, 18:03
Ive already told him when he pm'd me a couple of weeks ago that its the same gasket Scoff, im assuming hes ignorant or blind.

It even says 1.9 on the outside of the packet on my headset.
Mart
15-01-2009, 18:28
:sad2:
gttjames
15-01-2009, 18:36
yer but i no my soding luck... il order the kit, and get the 1.4mm (like gsf have told me).

im not ignorant, blind or stupid. iv been told by gsf that the kit contains the 1.4mm gasket, and your all telling me it contains the 1.9mm gasket. errrrr confused.com
Mart
15-01-2009, 18:40
Ask yourself this - Does it really matter if they do supply a 1.4mm gasket anyway? I'm guessing you're not running high c/r, nor running crazy boost levels, nor running heavily advanced ignition, so you'll be fine even with that thickness gasket in situ.
Mart
15-01-2009, 18:41
Except for the fact, that is, that they'll be supplying you a 1.9mm gasket...