alloy wheel fitment

[R5MJH]

right, i know the fitment and may have found some new alloys as mike buckled one, im waiting on a email about the centre hole but ive just noticed there 6.5j thou will the 195/45/15 toyos fit ok thanx mick:agree:

[Mr Raider]

Centre bore for renault is 60.1mm, although can use spigot rings to ensure correct fitment. Need to be 4 x 100 PCD which is for the holes for the bolts. Any ideas on offset? can run spacers if needed :)

[R5MJH]

Centre bore for renault is 60.1mm, although can use spigot rings to ensure correct fitment. Need to be 4 x 100 PCD which is for the holes for the bolts. Any ideas on offset? can run spacers if needed :)

yeah i done some homework et35 is the offset but they are 6.5j instead of 7j so slighty narrower i was wondering if the 195's will sit ok and not bulge on the rims:agree:

[Mr Raider]

Ah ok, so .5j is the difference in width of the rim itself, 5mm? :scratch:

The width is the section between the tyre mounting flanges on the wheel

http://www.rimstyle.com/pages/alloy_wheels_explained.html

[R5MJH]

thanx sir what i mean is on the current 7j rims the tyre sit flush with the rim with 195's because these are slighty smaller i was wondering if the 195's would bulge slighty

does anyone have a 195/45 on a 6.5j rim to tell me ot have a pic??

thanx mick

[Biggs]

195's will be fine on 6.5j :)

[R5MJH]

ok what about 16"s on 195/45/16 with car lowered 35mm, has anyone done this??

do they rub??

thanx mick

[Biggs]

ok what about 16"s on 195/45/16 with car lowered 35mm, has anyone done this??

do they rub??

thanx mick

I'm pretty sure that's what I used to run on the car I sold markey b, could possibly have been 40/16's (was a long time ago now)I never had any rubbing issues and that was on coilovers.

[turbo ted]

mick it will be fine audreys car runs 195/45r16 now and it used to run 205/40r17 but the tyres where to hard for the 5 suspension setup.

[R5MJH]

mick it will be fine audreys car runs 195/45r16 now and it used to run 205/40r17 but the tyres where to hard for the 5 suspension setup.


thanx sir will 172 turinis fit the 5 with 5mm spacers:agree::agree:

[Ashy]

thanx sir will 172 turinis fit the 5 with 5mm spacers:agree::agree:

I run turinis on mine with 205/40/R16's and 5mm spacers on the front. They catch slightly on full lock and the rears rub a little when fully laden....

[R5MJH]

I run turinis on mine with 205/40/R16's and 5mm spacers on the front. They catch slightly on full lock and the rears rub a little when fully laden....

thanx ash , were yours the et38.5 or et45 as the 45s would still rub i expect:laugh::agree: