Quick Question

[LiamR]

When you have your headlights on, should both interior switches for the electric windows light up?

[Haz]

Yup, and the c/l switch.

[LiamR]

Thank you very much. Next question...is there a way of changing the bulb in the switch at all?

[Haz]

Yup, pull it out of the socket, pry off the button cover from the pegs on the centre of the sides to access the bulb. Same ones used for dash switches, clocks etc.

Some wattage varies so do check, don't want them to be dim.

[LiamR]

Thank you muchly Haz :agree: perfect advice.

[TopCat]

Make sure you have voltage to the switches first mate

[Jonny5]

Same ones used for dash switches, clocks.

Are you sure?
Mine was a tiny bulb, with long copper wires coming from it that wrapped around the switch rocker pivots.
It looked nothing the like the other twist in type dash/clock bulbs.

[Haz]

Have you taken the bulbs out of the bulb holders that twist into the clocks ;)

[Jonny5]

Have you taken the bulbs out of the bulb holders that twist into the clocks ;)

No, i havent :) but you didnt say that :cooter:

Is that seriously the bulbs you use as i have been searching for ages for the type i mentioned :laugh:

[Haz]

Yup, just fiddley to get out, 50/50 if they break. I find rocking them side to side, wire to wire, rather than front to back.