Omp roll cage

[Benjibrady]

Just thinking about this really I have a omp roll cage in the 5 and I'm toying with the idea of going back to an oe set up question I've got guys is, a) what's the roll cage worth b) what's a full set of interior plastics plus door cards and seats cost?

Thanks all.

Ben

[TopCat]

Interior- a fair bit if u want a mint condition one.

Unsure on the cage, most cages go around £200-£250 mate.

[Benjibrady]

Thanks top cat least I've got an idea of what it costs now

[Os8472]

If the front legs of the cage drop infront of the dash and not through it, when you sell the cage, talk to me first as I'll take it

[Benjibrady]

I'll bear you in mind Os, haven't made my mind up yet.

If I do decide I'll drop you a pm

[Goobie]

If its a full cage with door bars then around £350 I seen them pop up for. :)

[Benjibrady]

Yup full one with door bars.

I'll see if a reasonably priced interior comes up

[Ian M]

I modded my omp cage slightly and have now fitted fitted it with all interior plastic trims bar the sun visors!

[Goobie]

I modded my omp cage slightly and have now fitted fitted it with all interior plastic trims bar the sun visors!

I've modded mine a bit to. :scared: :laugh:

[Benjibrady]

I modded my omp cage slightly and have now fitted fitted it with all interior plastic trims bar the sun visors!

Oh really?

What did you have to do to it?

[ScottKinnear]

I modded my omp cage slightly and have now fitted fitted it with all interior plastic trims bar the sun visors!

I've got Dave reeds old safety devices cage and all the plastic trims are in place there too with no mods. The only part I removed was the rear seats and visors as stated with the omp cage.

It keeps the car homely still

[Os8472]

I've got Dave reeds old safety devices cage and all the plastic trims are in place there too with no mods. The only part I removed was the rear seats and visors as stated with the omp cage.

It keeps the car homely still

Don't tell him that, I want him to sell the cage to me

[Ian M]

i removed the 4 brackets, 2 by the windscreen and 2 by the b pillars.
it was really tight getting the plastic trims in, but managed it, the a pillar trims i had to remove the plastic square block from the rear of the trim half way up, to get it in, but i cant get this screw in anyway.
The roof console also needs a little trim.
i can also get the rear seat in if i unbolt the rear diagonal bar, it squashes the side cushion of the seat but not alot really