Marcel
02-01-2014, 18:29
Hello al
I have this problem , i bought an r5 with the 4 paddle clutch kit from Helix .
i broke the clutch cable ,when installing a shorter not ggt cable i did put to many force on the clutch arm and the release bearing was gone .
then fitted the gtt cable but the dammage was already done.
my question is now
i put the longer clutch arm in to get the soft pedal conversion .
but what for an clutch release bearing are you all using
i cant find nothing about an stronger release bearing or something else .
or an orginial gtt one or what else is good to use .
the gtt now has 260Nm
so please help me out guys
regards Marcel
I have this problem , i bought an r5 with the 4 paddle clutch kit from Helix .
i broke the clutch cable ,when installing a shorter not ggt cable i did put to many force on the clutch arm and the release bearing was gone .
then fitted the gtt cable but the dammage was already done.
my question is now
i put the longer clutch arm in to get the soft pedal conversion .
but what for an clutch release bearing are you all using
i cant find nothing about an stronger release bearing or something else .
or an orginial gtt one or what else is good to use .
the gtt now has 260Nm
so please help me out guys
regards Marcel