Facet style solid state fuel pump

[clee]

I've bought one of these to replace the front lifter pump on the GTA .
Will it be OK used in an injection system ?It's pressure and flow rate are above the std Ren rotary unit .

[Andrew Cooke]

I've bought one of these to replace the front lifter pump on the GTA .
Will it be OK used in an injection system ?It's pressure and flow rate are above the std Ren rotary unit .

they're bloody noisy, I know that. As long as it has more flow than your injectors you'll be fine.

[clee]

I'm going to put some 330cc injectors in .The front pump is 130l/hr 5-7 psi , feeds to a little tank/swirl pot then I've got a Walbro 255l feeding the injectors .
Std setup is only 15l/hr front .45 to .55 bar and 130l/hr @3 bar rear .