Wiring AEM AFR gauge up

[RSi SiDs 480]

Needing a bit of help guys!
I now have my sensor bung welded in and my clock situated and wires fed but I'm unsure of what wires to tap into! I'm not data logging at the moment so just need no where take positive from, switching live and earth ,, sid

[andybond]

Sid.

Red is =ive 12v
black is earth.

I took my power from the steering column area. Remove the cowl.

There are several wires on there for you to choose from.

Splice a red into the orange from the cowl area. Thats a switched earth. You dont need a perm. live.

splice a black onto an existing black and you should be laughing.

[RSi SiDs 480]

Top banana Andy I'll give it a whirl now ;-)

[Chunk]

Did you mean to say the orange wire is a switched live?

I'd expect orange to be switched +12v (only on with ignition) and black to be earth

Could be wrong, not had a poke around in there yet