Changing front discs, need new hub nut

[Guybrush]

As title, can't remember if on the fronts i need a new hub nut after i put new discs on.
Anyone?

[Bigfoot]

You don't remove the hub nut on the front when changing discs.

[SCHWARTZ]

No need to take hub nut off as all ready said.

[LiamR]

Agreed as above...just take the torx screws off, tap the disc with a mallet and it falls off :)

[Guybrush]

I'm also taking the driveshaft off on one side to do the CV boot.

[Bigfoot]

They say if you remove the nut you should replace them, but not had a problem re-using mine in the past as still tighten them up to the same rating.

[Wallace]

bit of loctite or thread seal and itll be fine...........just make sure its torqued up:agree: