PDA

View Full Version : Heaters



steveGTT
05-10-2013, 07:53
Hi my heaters are not working there power going to the switches but not to the fan can ne one help or tell me what could be wrong with it?

B18ftMOJO5
05-10-2013, 08:01
could be a dodgy fan, sits in the middle of the dash next to the battery and water washer bottle. sometimes you can reseat them if they are not in the right position. Although dont put it back in without the metal guide ring, i broke two fans doing that.

LeeR5GTT
05-10-2013, 08:52
You have an open circuit between switch and fan. Do you have any power at the resistor?

Ashy
05-10-2013, 09:06
Aye, usually just the fan itself not sitting right on its contacts. Pull the cover off in the scuttle tray, hold the fan by the blades and pull up, it will just pull out. You can check you've got power to the contacts and if so its usually just a case of dropping it in a few times until it sits right.

steveGTT
05-10-2013, 12:11
I've pull the fan out and there's no power getting to it well to where the fan gos

DaveL485
07-10-2013, 09:54
Probably the rheostat under the fan.