injector boss

[Adey aka Ewok]

does any one know where i can get ali weld on/in injector bosses in the uk? cheers

[Mart]

http://www.ebay.co.uk/itm/FUEL-INJECTOR-BOSS-BOSSES-FOR-INLET-MANIFOLD-RAIL-/380353959758?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item588edcd74e

Looks a bit 'meh', but might do the trick.

Burton Power (iirc) used to stock weld-on types.

[JP Racing]

I can get hold of some like the ones I use if there any good.

http://i1307.photobucket.com/albums/s584/JPRacing1978/7B260C77-1A87-4ABF-AB29-2DD4CDFDEDB7-1986-0000022DE70791E1_zps54c08697.jpg

[Adey aka Ewok]

Cheers mart saw them but don't fit my needs. How much are the ones you can get jp?

[JP Racing]

Better picture for you :)

http://i1307.photobucket.com/albums/s584/JPRacing1978/5EA9FC1A-67BB-4FAC-B898-8C178EB9D156-1986-00000231E797F0F0_zps004d2a58.jpg

Just txt my mate who gets them and when he gets back to me I will let you know :)

[Mart]

Cheers mart saw them but don't fit my needs

Did you try Burton?

If not, Emerald do them as well: http://www.emeraldm3d.com/weld-on-fuel-injector-bosses.html

[JP Racing]

The one who gets them used to work for emerald and has told me he had them custom made most Likely buy the same company as emerald. Are the ones pictured ok as he can have them made to your spec :)

[Adey aka Ewok]

nice find, if jp can get them cheap ill be happy if not i can try the emerald ones :agree:

[JP Racing]

The ones I have pictured came from emerald as he got discount when he worked there but he can get them made up for around £7-10 each but would need an injector to make it :) I also know one of the lads at emerald so could see if I can get them any cheaper for you.

[Adey aka Ewok]

Any saving would help cheers. Need them the week after next, hope to order a set by Friday so let me know.:agree:

[JP Racing]

Ok mate just sent a txt so hopefully know before lunch ;)

[JP Racing]

Ok he says he can't do a discount on them as they make no money on them and even more bad news is they are custom made in America and they only have 3 in stock? So not sure when they are getting any more. I can ask my mate what the turn around time is and if its a std Bosch injector I have one here I can give him to match :)

[Adey aka Ewok]

you sir are a legend, if you could and ill cross your palm also. yeah just the standard size, 14mm i think??

[JP Racing]

Ok spoke to my mate he is seeing the machinist on Saturday so will take a few days to make so middle of next week :)

[Adey aka Ewok]

is this the mate at emerald or someone else? how much we looking at?