w35ty
22-08-2013, 19:00
Ok well iv just started doing my f7 conversion....
(Using jc5 box)
Anyways, i am using the clio mk1 subframe, then using clio 172 hubs discs calipers i have had the 172 hubs machined down to 20mm to fit the gtt struts..
Only problem is that the 172 splines are bigger on the driveshafts so got to use the shafts but there longer...
I know the williams bottom arms are longer than the gtt ones but are they long enough for the 172 shafts? anyone got sizes or info on mk1 clio and 172 bottom arms? Length?
only other way i thought was to swap the outer cv joint ends off the 172 driveshafts with the gtt ones and use the gtt shafts with original botttom arms? If poss can they be split?
(Using jc5 box)
Anyways, i am using the clio mk1 subframe, then using clio 172 hubs discs calipers i have had the 172 hubs machined down to 20mm to fit the gtt struts..
Only problem is that the 172 splines are bigger on the driveshafts so got to use the shafts but there longer...
I know the williams bottom arms are longer than the gtt ones but are they long enough for the 172 shafts? anyone got sizes or info on mk1 clio and 172 bottom arms? Length?
only other way i thought was to swap the outer cv joint ends off the 172 driveshafts with the gtt ones and use the gtt shafts with original botttom arms? If poss can they be split?