View Full Version : Handbrake light/switch
Got an issue my handbrake light does not work , have tried bulb and new spade connection on wire.
How does the handbrake work , when on it goes to earth ??
The light does not come even with ignition on???
Ay ideas thanks matthew
Are your handbrake cables all fitted to the calipers etc?
Sorry if it seems like an on obvious question, but cant remember if you're mid resto or back on the road now
Hi when you pull the handbrake the switch goes to ground could try unpluging it and putting the conector to ground and see if he light comes on then you know if the handbrake switch is at fault or the problem lies else where .did you repaint inside because it might not have a good ground to the body. Have you messed with the wiring or changed anything.
Hi when you pull the handbrake the switch goes to ground could try unpluging it and putting the conector to ground and see if he light comes on then you know if the handbrake switch is at fault or the problem lies else where .did you repaint inside because it might not have a good ground to the body. Have you messed with the wiring or changed anything.
Yes inside was painted where does the switch hit outside of car or inside
inside, but earth it anywhere and it should work if the wiring/bulb is ok
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.