PDA

View Full Version : Adaptronic 420d



GaryS
06-07-2013, 13:19
Hello, my car dont run to good. The ecu has lights 4 for the injectors and 4 for the ignition, but no 4 on the ignition does not flash :confused: i cant see anything wrong, whats up with it?

GaryS
06-07-2013, 19:08
Basically it running really crap and hunting all the time, tries to conk out when u move.

Think my first post is just meaning less cr@p :rolleyes:

No pod for me :(

Scoff
06-07-2013, 19:59
Only 3 Ignition lights should flash. You're useing Ignition 1 and 2 for the wasted spark and Ignition 3 is driving the tachometer. Ignition 4 is not connected :)

"Don't run too good" probably means it is not mapped yet ?

GaryS
06-07-2013, 21:47
Im using that map you sent me? i thought it should at least run ok? :)

GaryS
06-07-2013, 21:48
It hunts away like a gooden

robx1r
07-07-2013, 12:26
i hope i'm not out of line scoff, the map that was sent is a base map its not 100% right, because every car is different and needs different fueling

GaryS
07-07-2013, 13:17
thats fair play, i just thought it might run abit better :D

Blocky
14-07-2013, 09:00
thats fair play, i just thought it might run abit better :D

In the hope that you might just get away without having to map it correctly :cool::wasntme:

5teve L
15-07-2013, 17:13
Idle control valve ???

Matt Cole
15-07-2013, 19:06
Air leak?

A base map is exactly that something to work from. If it starts and runs the the base map has fulfilled its duty.