Help - speedo not working

[andymatt1]

Help please ..
Speedo isn't working
Not sure if its the clock or something else
Any thoughts or tips appreciated thanks

I have the clock out is there any way to test it?
Or where does it get the signal from?

[Nottswoody]

First check its still connected in your gearbox or burnt on your exchust follow the wire to the joining black clips pull apart and separate a little the three male connections as try get worn.. Ten clean the connections behind the clocks.. Of those three don't worked your ****ed :) worked for mine after two years of not workiń

[andymatt1]

Thanks mate will try that

[StuHERTS]

Mine was the connector on the back of the speedo
http://i1259.photobucket.com/albums/ii546/stuio74/speedo3_zps4bfc4737.jpg
Theres also a plastic strip there with 2 or3? metal strips on it., make sure thats not gunked or has crap on and put back in.
Also,
Disconnect this, clean and put back.
http://i1259.photobucket.com/albums/ii546/stuio74/speedo1_zps32734cfd.jpg

I had to just adjust the speedo needle as it was 10mph out, prying it off with a fork and moving it 10mph forward, if you do, it's very delicate so be careful...