Brand New K-Tec Pro Alloy Grille Mount Intercooler Kit

[*MrB*]

Change of direction means I have a brand new K-Tec grille mount intercooler kit for sale.

Full details can be found here:
http://www.k-tecracing.com/show_product.asp?id=399&appid=16

Some pics of the actual intercooler

http://i64.photobucket.com/albums/h175/bl4ndy/299854E8-5A67-4D30-828B-D3E4CC45221C-5052-000002E9EED934AD.jpg
http://i64.photobucket.com/albums/h175/bl4ndy/279D2796-5FD2-48C8-8B33-519A2FC3D162-5052-000002E9F2C10E5C.jpg
http://i64.photobucket.com/albums/h175/bl4ndy/E6519E59-E8A9-406F-BA8D-E5EB723F1F3E-5052-000002E9F5F6C5FA.jpg
http://i64.photobucket.com/albums/h175/bl4ndy/0A60E712-527A-40FF-9A20-D748E3721D90-5052-000002E9F9C77034.jpg
http://i64.photobucket.com/albums/h175/bl4ndy/6E73397E-1A32-42D3-A00E-C0100F1AFE93-5052-000002E9FD9307C1.jpg
Bad bits;
On 1 of the fans the wire has been chewed by my mates dog :(
I have repaired by soldering it with short piece of cable but also the plug has been a bit mangled. In all honesty I doubt you would use these plugs and instead hard wire the fans in

http://i64.photobucket.com/albums/h175/bl4ndy/4CADC342-1A80-4A48-BE35-108A82B2E86C-5052-000002EA013FB151.jpg

http://i64.photobucket.com/albums/h175/bl4ndy/AF883FB6-88CA-4AF9-8DD8-223E241EE707-5052-000002EA04532212.jpg

http://i64.photobucket.com/albums/h175/bl4ndy/40B7B79C-2E80-4E93-AA5B-D69CB1D6F529-5052-000002EA0763CFC9.jpg

I'm asking £350 for the kit or sensible offers. They are £495 from K Tec.
Fully insured delivery is £12
Payment by bank transfer or PayPal gift/fees paid

:cool:

[TopCat]

I can supply the buyer with brand new spal fans at cost if it helps u shift this mate.

I it hundreds of these fans every year so get them very cheap.

Definately recommend solder and shrink wrap the wiring :agree:

[*MrB*]

That's very decent of you, thanks Davo.

I have soldered and insulated so shouldn't be any problems for anyone but good to know you can sort a fan if needs be, TopCat, top man :agree:

[bood]

May be a silly question but would there be much improvement over my double breadbin intercooler?

Thanks

[*MrB*]

I would say so as its huge and will be right at the front of the car passing loads if cool air :agree:

[r5_scotty]

I would say so as its huge and will be right at the front of the car passing loads if cool air :agree:


and covering the rad so the engine gets hot ,not sure on these myself but a quality looking product:agree:

[*MrB*]

A proper working rad with the twin fans supplied should keep things cool :cool:

[*MrB*]

Provisionally sold. Taken a deposit pending balance next Friday :cool:

[Deano]

and covering the rad so the engine gets hot ,not sure on these myself but a quality looking product:agree:

I've got one of these Pro Alloy coolers on mine and it never - ever gets too hot, actually my rad fans are hardly ever on, even sitting in traffic :)

[*MrB*]

Cheers for the input Deano, I suspected that would be the case but as I have never used one I couldn't really comment from experience but guessed they would be pretty good :agree:

[Whyte146]

I will inform you, upon fitting ;)

[*MrB*]

I will inform you, upon fitting ;)

:agree::agree:

[*MrB*]

Full payment received, will be sent Mon/Tues, delivery Wednesday latest :agree: