View Full Version : Need Raider lowered
Jamraid5tt
12-04-2013, 21:14
New poster! (less than 10 posts)
Just got some Renault Clio turbines and put them on my raider and it looks like its riding to high . It's got standard suspension , need some ideas on best way to lower my raider and getting it to look low and sleeke . And also a good place to get this done as not mechanically minded I live in Surrey if someone knows of a place in this area to get it done..?
Thanks Jamie.
SCHWARTZ
12-04-2013, 21:21
Where in Surrey? There's loads of members who could do it round here. The Surrey meet would be a good place to start:D you could use std front shocks and use lowering springs 30 40mm whatever and lower the rear torsion bar to suite.
Jamraid5tt
12-04-2013, 21:38
New poster! (less than 10 posts)
Hi there I'm from Guildford myself and I've only had my raider a few months and would like to meet other 5gtt owners . If you could tell me where the meet is held and at what time and day I will do my best to get there.
You got Mike at gt turbo spares just 5 minites from guildford. He'd probably do it for you,
He'd have the lowering springs too mate.
Can I suggest a meet at my garage with local members?
James5, steve L, dave (shaggy) and others and we lower this car like the old days?
Just a suggestion sounds fun
Springs needed and slide hammer.
Come on chaps roll up ( not a wed eve though!)
Can I suggest a meet at my garage with local members?
James5, steve L, dave (shaggy) and others and we lower this car like the old days?
Just a suggestion sounds fun
Springs needed and slide hammer.
Come on chaps roll up ( not a wed eve though!)
Not that I'll be doing it as spinal fusion surgery is set for may 7th...
Jamraid5tt
12-04-2013, 22:14
New poster! (less than 10 posts)
Is there a regular meet in Surrey and if so where ? It will be good to get on the r5gtt scene ..
Not that I'll be doing it as spinal fusion surgery is set for may 7th...
Spinal fusion surgery good luck with that jrp hope it goes alrite mate
Yeah at the kings wood club a217 off junction 8 m25,
First weds of month.
You would meet most them if I hold a garage meet... Ahhh the old times
New poster! (less than 10 posts)
Is there a regular meet in Surrey and if so where ? It will be good to get on the r5gtt scene ..
1st wednesday of every month is the rtoc surrey meet held at lower kingswood.
Ref lowering the 5 I dont mind helping out I am in southwater matey which is 30 mins from guildford matey. Drop me a pm if you want any help or advice.
James
Spinal fusion surgery good luck with that jrp hope it goes alrite mate
I'll be out the wheel chair in a matter of days I hope after! I have a wedding 12 days after opp I have to man the funk up and be there. Prob day after I get out hospital lol!
Having disc removed too and front spine rodded too I think also back bit, at least I have the screws in there already...
In short I'll be ok
1st wednesday of every month is the rtoc surrey meet held at lower kingswood.
Ref lowering the 5 I dont mind helping out I am in southwater matey which is 30 mins from guildford matey. Drop me a pm if you want any help or advice.
James
James get collected, do at mine ;) an old school eve lol garage has free side....
Yeah at the kings wood club a217 off junction 8 m25,
First weds of month.
You would meet most them if I hold a garage meet... Ahhh the old times
Its been a whilse since we have done that would be pretty cool to get us all together and fill the drive with 5s like back in the day:D
I'll be out the wheel chair in a matter of days I hope after! I have a wedding 12 days after opp I have to man the funk up and be there. Prob day after I get out hospital lol!
Having disc removed too and front spine rodded too I think also back bit, at least I have the screws in there already...
In short I'll be ok
I am sure it will be mate it sounds like a big job
Its been a whilse since we have done that would be pretty cool to get us all together and fill the drive with 5s like back in the day:D
Well lets do it then! Old schools JRP tea and 5 evening
Jamie would be in safe hands
Don't see my name on the list presume I'm not invited :jerkoff:
SCHWARTZ
13-04-2013, 09:12
As said you have mike (phase1) right near ya for springs. I'm up for doing this sounds good.
LeccyBlue5
13-04-2013, 13:35
i need mine loweringt too :D
i need mine loweringt too :D
Yours just needs burning :wasntme::cooter:
JRP, I hope you are up in a few days after the op, from what I've read I don't think you will be though mate !!
Can I suggest a meet at my garage with local members?
James5, steve L, dave (shaggy) and others and we lower this car like the old days?
Just a suggestion sounds fun
Springs needed and slide hammer.
Come on chaps roll up ( not a wed eve though!)
Angle grinder & a threaded bar with 2 nuts & a washer on ?? :p:cooter:
LeccyBlue5
13-04-2013, 16:09
Yours just needs burning :wasntme::cooter:
JRP, I hope you are up in a few days after the op, from what I've read I don't think you will be though mate !!
been there nearly done that getting it over to james's last weekend :wasntme:
should be back on road at beginning of the week.
been there nearly done that getting it over to james's last weekend :wasntme:
should be back on road at beginning of the week.
:agree:
So what's the plan???? I'm free all the time
Angle grinder & a threaded bar with 2 nuts & a washer on ?? :p:cooter:
Finger Tight Tuning at it's best :laugh:
been there nearly done that getting it over to james's last weekend :wasntme:
should be back on road at beginning of the week.
Back on the road now though matey no rattles / knocking from engine - enjoy it:agree: Can lower rear of it for you soon matey when your ready:D
SCHWARTZ
16-04-2013, 13:14
Lets do it at the meet.
Lets do it at the meet.
:agree:Sounds good to me
:agree:Sounds good to me
if its anything like the valver jim its not going to be fun to do at the meet lol:cry:
SCHWARTZ
16-04-2013, 15:51
I looked at my torsion bars and they just fell out:laugh: get soaking it in wd40:D
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.