pushrod/s

[tubbyG]

as titled........anyone have spares??

I need one for definate, untill I can inspect the rest properly..



this is what I get by showing a type R who the boss is :laugh:

http://i880.photobucket.com/albums/ac2/Phase2-tungy-gtt/20130304_173437_zpsa1832418.jpg

[phase i 16 v turbo]

Hi Graeme, got loads in stock.:agree:

[Sid Dawn]

Hi mate just seen ya pushrod...:sad2:

I've started doing sleeves for pushrods...

http://www.rtoc.org/boards/picture.php?albumid=1738&pictureid=8174

£30 if you send me yours to be done...:agree:

[Nottswoody]

Who won :) oh dear any other damage?

[tubbyG]

thank you for the reply's. No other damage.... engine was running ok, just sounded awful and rattling. I knew what it was instantly (happened twice before :()

Flat shifting on the 7k rpm limiter obviously has its consequences :burnrubber:


Sid - they look interesting, but how much is added onto the pushrod diameter with these sleeve's??
Currently looks tight between the pushrod and head as it is. And is that price for a full set of 8?

[Sid Dawn]

off the top of my head I reckon they go up to 5/16 o/d...in real money thats just under 8mm..:)

price is for set of 8..deliverd :):) when you send me yours;)

cheers

[tubbyG]

That sounds like a good deal. But I will have to look closely at how much clearance there is in there and get back to you or perhaps buy another set and send them down as I would like to be mobile again asap.
I must have a reground cam as I had to move the securing nut to the underside of the rocker arm to adjust the tappets correctly

[Sid Dawn]

That sounds like a good deal. But I will have to look closely at how much clearance there is in there and get back to you or perhaps buy another set and send them down as I would like to be mobile again asap.
I must have a reground cam as I had to move the securing nut to the underside of the rocker arm to adjust the tappets correctly


you can get longer rods... standard are 173 long and the others are 178 long...infact I have a set of them...will sort ya nuts out a treat..:eek:..

pm for you on price..

I also do rockers...lol

cheers

[tubbyG]

Nice one sid. I have seen the rockers, nice work :agree:

Unfortunately I have another project on the go just now (a house) so my pocket money has taken a nose dive and luxury purchases are out of bounds :laugh:

[GARY GRWTURBO]

Nice one sid. I have seen the rockers, nice work :agree:

Unfortunately I have another project on the go just now (a house) so my pocket money has taken a nose dive and luxury purchases are out of bounds :laugh:

I think I've got three or four laying around you can have for free
ill check in the morning

[turbo ted]

here's a picture of uprated pushrod beside a standard one i used from another type of engine they where longer and cut down to suit reprofiled cam, you will need to make the holes bigger in the head as the pushrods will hit.good idea with the sleeves sid very clever:agree: