gtt king lead

[SCHWARTZ]

Looking for a gtt king lead pref silicone 7 or 8mm jobbie.

[Jonny5]

I have a full set of 7mm leads for sale, red including the king lead if you need mate

[SCHWARTZ]

Only king lead needed, c1j ht leads wont reach.

[Ian S]

I have spare a king lead. It's silicone but thinner and black. Not branded, IIRC. I'll have a look at the length. Won't need much £ for it.

[SCHWARTZ]

C1j King lead will defo be long enough but really looking for a nice thick lead as I have a thick set of ht leads to go on.

[Ian S]

It's 7mm thick and 85 cm length.
http://www.rtoc.org/boards/picture.php?albumid=1583&pictureid=8154http://www.rtoc.org/boards/picture.php?albumid=1583&pictureid=8155

[SCHWARTZ]

7mm that's plenty thick enough that looks perfect matey how much? Just to be sure the dizzy end fitting is the internal type fitting and not one like a spark plug? If that makes sense:scratch:

[Ian S]

The one on the right in the photo is the Disty end, 90° bend, plugs into the recess in the disty.

The straight end goes onto the 'spark plug' coil terminal.

90g grams in the envelop. 2nd class is £2.20. Recorded is £3.15.

£5 + post?

[SCHWARTZ]

The 90's on the dizzy end don't think that will work matey. I need the internal fitting for a b18ft coil but it is very deep, the last lead was like this and I had to bend it straight after a few times of taking it off it snapped:sad2:

[Ian S]

I took the boots off to see if they would swap. No. The bent end doesn't straighten and the straight end doesn't bend.

There might be some new ends available though......

[SCHWARTZ]

Shame as it looks like a decent lead, cheers for trying tho matey but I think il just have the same problem as I've been having:sad2:

[Ian S]

I found an ebay seller with 36,000 items listed who might sell the appropriate ends. I've asked a question to see if he can point me to them.

[SCHWARTZ]

That's what I have now decided to do. Just bought the end that I need and I will fit it to the old lead and see how that goes.