PDA

View Full Version : window



chris
17-02-2013, 14:48
hi guys i am trying to remove the glass from my drivers side door but the electric window moter isnt working and the windows up at the moment. any ideas how i can get the window down and unbolt out of guide so i can lift it out thanks :agree:

JRP
17-02-2013, 14:56
hi guys i am trying to remove the glass from my drivers side door but the electric window moter isnt working and the windows up at the moment. any ideas how i can get the window down and unbolt out of guide so i can lift it out thanks :agree:

Take door card off, slacken up clamps and it will do what ever you like. I hated fiddling with mine.

chris
17-02-2013, 15:06
yea got all the door card off but with the window stuck up so cant get to anything :cry: any other ideas jrp thanks for quick reply

JRP
17-02-2013, 15:15
What's not working? The motor could you free it up? You can wiggle it down sometimes holding both sides of the glass?

chris
17-02-2013, 15:26
The moters not working theres signal to it tho

R5MJH
17-02-2013, 15:36
The moters not working theres signal to it tho

play around with wiring plug loads wd40 if no go still pop the cable off motor with a screwdriver and push window down

TNT Tricky Nicky
17-02-2013, 15:36
The motor will unclip from the window mech allowing you to slide window up and down to where you need it. Undo the 3 10mm bolts that hold it to door which should give you enough room

chris
17-02-2013, 15:42
Cheers lads for advise will give it a go

bood
17-02-2013, 16:39
Or put 12v to the contacts on the motor direct and it will move.

chris
17-02-2013, 16:45
Or put 12v to the contacts on the motor direct and it will move.

Its getting 12v from the switch but moters doing nothing mate

R5MJH
17-02-2013, 17:00
motors probably fooked do as i said before mate

chris
17-02-2013, 17:19
Moters definatly knakerd yea guna pop cable off buddy

gttjames
17-02-2013, 19:09
you can use a paperclip to power them up like with the fan switch on rad. IF still no good then like said remove motor (3 10mm's and wirring clip and just pop it out of cable, then you will be able to slide it up and down

michael tierney
17-02-2013, 21:08
undo the motor nuts and the upper and lower reg(slider) nuts and it should come down

chris
17-02-2013, 21:15
Yea trouble is i cant get to them with window up i will just pop cable off moter