PDA

View Full Version : water temp sensor.


royz
16-02-2013, 21:05
for those that have added EFI to the c1j where have you installed the water temp sensor.
thanks roy
Dave Reed
16-02-2013, 21:32
In the blanking plate on the head.. It's the opposite side to the water pump (6 bolts hold it on if i remember right)
car.crash
16-02-2013, 22:11
In the blanking plate on the head.. It's the opposite side to the water pump (6 bolts hold it on if i remember right)

Make sure you take it off before drilling as its not all hollowed out under there.
philr5t
16-02-2013, 22:48
As both dave and mark have said mount it in the blanking plate on the c/head this is mine hope it helps
Phil
http://i853.photobucket.com/albums/ab97/philr5/A3D70B6D-05B5-4E1D-B6D0-1DBD9D19BFF8-1114-000000F26EDA3618.jpg
royz
16-02-2013, 23:04
i can not fit it there as my turbo actuator sits very close and i do not have the room.
chris
16-02-2013, 23:06
Put it in water pump mate
royz
17-02-2013, 18:15
thanks for the advice and thanks chris i did not even think of the water pump end.