pipework pics or diagrams

[boysie]

anybody have any pics of were pipes for coolant and breathers go?

i have worked most of them out, just stuck on the degassing pipes, oil seperator and the pipes for carb/inlet manifold (thats pretty much all the pipes then!)

found this off scoffs files :- http://www.rtoc.org/files/Technical%20Files/Scoff/silicone-hoses.jpg but it looks like it may be for phase 1? theres no pipes for turbo and seems to be others missing?

anybody help?

ta!

[Jonny5]

Standard turbo breather set up is like pic below

http://i1066.photobucket.com/albums/u410/JonnyR5-2008/image-2_zpsa3c205ad.jpg

Turbo pipes on that pic you have are

#3 Waterpump to turboinlet

#1 Turbo outlet to carb base.

If you need any other help or pics pm me :)

[boysie]

Thanks for that:) would be an idea if I read stuff properly before I post :scratch:

Any ideas on degassing pot? Ones from the top of header tank to top of pot, one from top of water pump with bleed nipple to bottom of pot, what about 3rd?

Also if anyone has any pics of pots and brackets I would be greatful, body shop filled over holes when he sprayed the engine bay so im not really sure were brackets go!

[Jonny5]

Degassing pot bolts to lower headlamp hole nearest to rad.

http://i1066.photobucket.com/albums/u410/JonnyR5-2008/image-2_zpsdc0d2d77.jpg

Pic of hoses :)
Top hose of degassing pot goes to top small connection of the header tank.
Top connection of pot goes to water pump.
3rd Lower connection on degassing pot is for the heater matrix.
Hose runs from matrix along back of the engine up the drivers chassis leg to the 3rd point on the pot.

Pic of Degassing pot

http://i1066.photobucket.com/albums/u410/JonnyR5-2008/image-2_zps228a3d91.jpg

Pic of its bracket

http://i1066.photobucket.com/albums/u410/JonnyR5-2008/image-2_zps5a327212.jpg

[boysie]

Cheers pal, your a star!:D:agree: