Central locking wiring?

[gardner51]

My middle central locking button dosnt work,

Has anyone got a wiring diagrame please?

Not sure if it matters but mines a ph1

Elliott

[gardner51]

anyone? :crap:

[Nottswoody]

I haven't a clue about electrics or I'd help.. Have you tried the wizard?

[gardner51]

Havnt asked him. Looked through pages but no luck?

Just need to no on the back of the switch what colours do what lol

Elliott

[markey b]

5 wires, this is off the top of my head so bear with me

outer ones are positive lock and unlock, so pin 1-5

there are 3 middles, red black and blue

red is constant 12v
black is earth
blue is switch illumination

u can test locking by jumping a wire from red to either of the outer ones to see if it locks or unlocks

hope this helps!

[gardner51]

Perfect.

Just what I needed to no. I can just send 12v down 1 or 5 to see if the motors work.

Thankyou!

Elliott

[gardner51]

Need some more help on this,

I have found my two wires at the footwell which don't go through into the door,

On the door motor their are 5 wires. Green and blue are the lock and unlock,

But if I send 12v down the green. The blue has to be earthed for it to work..

So how do I get this to work?

Elliott

[J$£5GTT]

you very sure its the actual central locking switch ?

could be the relay!! or duff solenoids....

:agree:

[gardner51]

so this dosnt confuse anyone... have found out these arnt genuine Renault door solenoids, that's why the colours didn't make sence,

should be sorted now though!

Elliott