reno 5 campus

[ren_5hitbox]

Hi guys

and happy new year.....

i need a new exhaust system for my campus but am struggling, does an older clio system fit the 5 at all? ive got a gt system which i tried out, but the pipe just after the lambda sensor is fatter than the campus pipe and bangs the subframe or steering rack, not sure what it is im no mechanic at all (as you can now tell haha)

bit of a ball ache really, if i owned a welder i could just weld the bit i need from the campus exhaust on the gt system and bobs your uncle, but i dont. any suggestions etc would be a great help

[chris]

What engine do you have in your campus

[ren_5hitbox]

What engine do you have in your campus

It's an L reg the 1.4

[chris]

Not the c1j turbo obviously or have you put that in your campus

[ren_5hitbox]

Not the c1j turbo obviously or have you put that in your campus

Haha I wish mate, no just the standard prima campus engine

[chris]

I dont think i can help i got a stainless exhaust system but its for a gt and your too far away for me to weld pipe for you i take it you want a larger exhaust system

[ren_5hitbox]

I dont think i can help i got a stainless exhaust system but its for a gt and your too far away for me to weld pipe for you i take it you want a larger exhaust system

I appreciate you considering doing that for me tho mate :)
Tbh I just want a system on it.. It's always had a rattly or leaky system on it :( not a lot of point going bigger on my engine because it lack power as it is but was just going to use my old gt system because it was laying around like

[chris]

Thats the trouble no point really but you could probley get one from a moter factors cheap enough or ebay

[ren_5hitbox]

Thats the trouble no point really but you could probley get one from a moter factors cheap enough or ebay

i was happy to just have a standard campus system on it really but really struggling to find anywhere that has the whole thing, i could get someone to fab one up for me but thats a lot of moolah for a campussy :/

thanks for your help tho matey, not heard of motor factors so will give them a go :) think i live on ebay these days....

will probably be putting a better lump in it next year but as for now its just a fun cheap run about :)

[chris]

A moter factors is a general term used for a place that sells parts for cars. I tell you what pm me ur reg and i will get the parts lads at work to see if they can get you an exhaust system and with some discount if you want

[ren_5hitbox]

A moter factors is a general term used for a place that sells parts for cars. I tell you what pm me ur reg and i will get the parts lads at work to see if they can get you an exhaust system and with some discount if you want

oh haha what a helmet lol, ok mate will do thats ace... thanks :)

[Brigsy]

Chop and weld the gtt system to suit mate

[ren_5hitbox]

Chop and weld the gtt system to suit mate

thats what i wanted to do but i only have an arc welder, no good for exhausts really. not that im going to notice in the campus that much but wouldnt i also lose back pressure? i mean it lacks power as it is lol

[old skool turbo power]

Hi guys

and happy new year.....

i need a new exhaust system for my campus but am struggling, does an older clio system fit the 5 at all? ive got a gt system which i tried out, but the pipe just after the lambda sensor is fatter than the campus pipe and bangs the subframe or steering rack, not sure what it is im no mechanic at all (as you can now tell haha)

bit of a ball ache really, if i owned a welder i could just weld the bit i need from the campus exhaust on the gt system and bobs your uncle, but i dont. any suggestions etc would be a great help

The clio mk 1 should fit the std system on the 5,i put a back box that fixed onto the 5 from the clio mk 1.its the same diamiater I THINK its not far off anyway.just go to a scrappy and have a look if you can,if not try the ebay.....

[Trevhib]

I thought the kink in the back box pipe on a Clio was too different to fit an R5 properly?

I was sold an early Clio stainless backbox years ago (not by an RTOCer), and was told it would fit a GTT 'no worries'. What a crock of sh*t. I had a nightmare with it. :disagree:

[chris]

I have managed to get him one its 57 pounds plus delivery which i thought is quite good

[phase i 16 v turbo]

Got 4 campus in the yard. All got good standard exhaust systems if you still need one.

Thanks
Mike