Volvo turbo options ......

[Nick k]

Shown below is the standard volvo unit currently on my B18ft, Im looking to uprate it to something with a bit more donkey!!( 20 psi max ) Now i would like to keep the manifold if possible and just change the compressor housing and core. Is this possible?! and other options please. Cheers Nick.

http://www.rtoc.org/boards/picture.php?albumid=1108&pictureid=7606

http://www.rtoc.org/boards/picture.php?albumid=1108&pictureid=7605

[Haz]

Something like a ktr180 should fit in. Anything bigger would involve changing the rear housing and downpipe

[SCHWARTZ]

Best bet is to get a custom downpipe made then you have a large variety of turbo options.

[TrixNFlix]

Think someone on here was trying out an old t25 of a Saab, can't remember who though. :crap:

[TrixNFlix]

Saab 900

[Haz]

I think the saab's were t3's?
I would change the downpipe/elbow too, for t25 flange, as mentioned you'll be able to fit t25/28's, without it you still have the restriction of the std t2 housing.

[Markey Mark (BD)]

I'm looking into a hybrid turbo which still uses the original rear housing so no need for a custom made downpipe

[Nick k]

I'm looking into a hybrid turbo which still uses the original rear housing so no need for a custom made downpipe

Chop Chop then!! :D