View Full Version : ats Classics, 13x7 and 13x8 staggered £300
I have for sale a set of ats classics, 13 x 7 and 13x8 staggered. 4x100
Far more Photos will follow, ill check the offsets also when possible. Condition ok, but a refurb wouldnt go a miss, 13x8 are extrememly rare to get hold of.. even more so both the 8's have centre caps, ( these fetch around £25 each alone), however id like to keep the centre caps with the wheels.. the two 7js have no centre caps however these are the same as any other ats wheel so very easy to get hold of.
These would look amazing on an r5, i need to check the bore to see if there straight fit.
The only photo i have currently
http://i3.photobucket.com/albums/y98/djinuk/another/IMG_4002.jpg
Please note the two tyres are shagged
r5_scotty
06-11-2012, 13:47
If the bore size is right and the et mate give me a pm :)
et0 and et10 are the offsets buddy. 57mm centre bore, .. You could get an engineering shop to remove some material.. I had this done for my bbs, they charge £7.50 per wheel.
r5_scotty
11-11-2012, 17:05
et0 and et10 are the offsets buddy. 57mm centre bore, .. You could get an engineering shop to remove some material.. I had this done for my bbs, they charge £7.50 per wheel.
isnt the offset a little tight for the renault tho really? would need spacers,extended bolts,plus enlarge the centre bore? i had that done on my ats stars at 15quid a centre.
not entirely sure if im honest matey,
although i did find this
http://i58.photobucket.com/albums/g278/adey1984/eurorearlights.jpg :)
Penfold aka The Dealer
11-11-2012, 18:10
not entirely sure if im honest matey,
although i did find this
http://i58.photobucket.com/albums/g278/adey1984/eurorearlights.jpg :)
Adey/Richardo's old tungy.... :agree:
The new Bill J
11-11-2012, 18:11
Wow - It's one of rtoc's bikes! I haven't seen that for a few years. That's been owned by half of rtoc I think :laugh:. I wonder if it's still about.....
At that point, it was owned by Adey, I think.
Sorry to hack the sale thread, but has anyone got more pics of that tungy ??? It looks awesome :D
wheels are going onto edition soon to be grabbed by the vw boys (as always :( )..
please dont hestiate to make an offer as id love to see them grave an r5 and its rare they come up for sub £500 figures
r5_scotty
12-11-2012, 17:45
they will fit a vw better to be honest as these will sit so far out on a 5. :crap:
fair call scotty, personally id run a smaller side wall than the tungy above, and therefore arch clearances wouldnt be an issue, but yep on a golf, just fit and drive.
Be nice to see some more r5's with cool wheels though.
sold , unfortunatly not to an rtoc member :(, gona live on a lupo :sad2:
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.