Hi 5 tuning tandoori express

[Hi 5]

This is what am up to a bit of jap crap lol http://i1171.photobucket.com/albums/r548/hi5tunig/09033372-5D85-471E-BAF8-B47BE648680B-3132-00000732F7B73B52.jpgstep one then http://i1171.photobucket.com/albums/r548/hi5tunig/CCBD3B60-B33B-4135-B09A-D9D5520F06E4-3132-00000732EFF7124F.jpgthen http://i1171.photobucket.com/albums/r548/hi5tunig/0D330779-58FD-4837-A3B6-520286E065C0-3132-00000732EBB7BFA1.jpghttp://i1171.photobucket.com/albums/r548/hi5tunig/8F469E8B-075B-4E95-807B-C1E0D452D0BB-3132-00000732E753E298.jpg then a little later http://i1171.photobucket.com/albums/r548/hi5tunig/35E483D7-758E-4FDF-9884-610F79765174-3132-00000732CBB39C13.jpghttp://i1171.photobucket.com/albums/r548/hi5tunig/F0313F1D-C312-4B48-AC38-172FF11A6B7B-3132-00000732C4100935.jpgand then a little bar for chute http://i1171.photobucket.com/albums/r548/hi5tunig/778F44EB-80F8-4F1B-9585-E700365FF62C-3132-00000732C7CE8877.jpgThen spent a lot of time sorting thing out for the states

[Hi 5]

Now for a bit of shiny **** to make it go faster http://i1171.photobucket.com/albums/r548/hi5tunig/5C599B6F-A1C8-4BEB-A7A2-E3F8AAA408E6-3132-00000732E3A17E79.jpg. http://i1171.photobucket.com/albums/r548/hi5tunig/069A3F3C-EF70-4790-9FB7-62EF5902FAF0-3132-00000732DADA1BE1.jpg http://i1171.photobucket.com/albums/r548/hi5tunig/F72ECEFE-967B-499D-9B8A-586ECAFC2C1A-3132-00000732DF7885DD.jpg http://i1171.photobucket.com/albums/r548/hi5tunig/C5932D5D-E2C8-4583-9A38-BBCDE1392AD6-3132-00000732CF55CA5F.jpg they was lots of work done to the block fully sleeved bored honed etc should be good for 4 bar of boost:D

[HAndy]

this is going to be another wallet burning engine build:D

i gather your going for the 9's this time;) or dare i say 8's:laugh:

hope it all goes well for you:cool:

[GTphil]

:laugh: mines a chicken jalfrezi and with 4 bar boost it better still be bloody warm when it gets here!:smokin:

Love these civics, can't stop watching all the Yankee vids on YouTube. Looking good so far;)

[andybond]

Mental.


Absolutely mental.

[Hi 5]

this is going to be another wallet burning engine build:D

i gather your going for the 9's this time;) or dare i say 8's:laugh:

hope it all goes well for you:cool:

Up to about £5000 on engine at the moment lol my bed room is full of new parts are lass is having a fit carbon bonnet and boot inlet engine parts waste gates etc all new learning curve but got a lot done in a short time 9s should be ok to start going for about 800 to start with then we will see how I get on

[Moggy]

you seem to have removed all the nice bits from the inside of your car and fitted some builders pipes?

or am I missing something ;-):wasntme:

[Hi 5]

you seem to have removed all the nice bits from the inside of your car and fitted some builders pipes?

or am I missing something ;-):wasntme:

Your welcome to them lol :laugh:

[Brigsy]

Ricer :D cant wait to see it come together mate

[jesus in the seat of a 5]

will you enter it into next years show n shine....:cooter:, blimmey you dont hang about glen... should go ok id a thought....:devil:

[Hi 5]

will you enter it into next years show n shine....:cooter:, blimmey you dont hang about glen... should go ok id a thought....:devil:

What for judge ? After this years do I think not wind up merchant

[GT Josh]

Hahaha Glenn 'the mad ****'. 4 bar of boost and plenty of gas.

[Hi 5]

Hahaha Glenn 'the mad ****'. 4 bar of boost and plenty of gas.

No gas pal but will be on race fuel the new fwd class for 2013 looks very good (joined hks and esc in one class) sounds ace carnt wait should be good year for fwd cars

[GT Josh]

Be a good year that's for sure :agree:

[Rob@Backyardracing]

Love it... i was struggling to keep my mouth shut for much longer aswell... ;)

[Hi 5]

Love it... i was struggling to keep my mouth shut for much longer aswell... ;)

Lol cars coming on ok starting to build engine next week

[Hi 5]

Had a start on engine today http://i1171.photobucket.com/albums/r548/hi5tunig/D5F3C7B9-812A-4E65-BF99-A93CC0E7B657-12314-00001DC6661C60E7.jpg http://i1171.photobucket.com/albums/r548/hi5tunig/25121551-39E5-4F58-85CE-0C7FC28F27BA-12314-00001DC66C676F83.jpg http://i1171.photobucket.com/albums/r548/hi5tunig/7A57BED9-4213-4A40-A2F4-9190015BE612-12314-00001DC6749D0A79.jpg

[Hi 5]

Yes building it in the kitchen lol

[GTphil]

Those pistons should be framed and put up on the wall! Well tastey!:smokin:

[chris]

What compression will you be running mate its looking good love that ur doing in kitchen bet the mrs loves it

[Hi 5]

What compression will you be running mate its looking good love that ur doing in kitchen bet the mrs loves it

9.0.1 Should be ok

[chris]

I really like these civic turbos i would love one do you have any idea on what sort of power u are hopeing to achive theres a nice one on ebay 600 hundred odd horsepower with a 10k rev limit

[Hi 5]

I really like these civic turbos i would love one do you have any idea on what sort of power u are hopeing to achive theres a nice one on ebay 600 hundred odd horsepower with a 10k rev limit

A lot more than that between 800 to a 1000 bhp everything I have specked for the engine had a 1000hp in mind

[Penfold aka The Dealer]

A lot more than that between 800 to a 1000 bhp everything I have specked for the engine had a 1000hp in mind


Thats silly BHP!!!! but fair play to you :D

[chris]

Bloody hell a 1000 bhp lol fairplay that should make it quite nippy lol will it be road legal

[Hi 5]

Bloody hell a 1000 bhp lol fairplay that should make it quite nippy lol will it be road legal

Oh yes but you won't be able to use it all but A good laugh 800 will do to start with if me ans scoff can get 470hp out of a 1.4 am sure we can make some good power

[Nottswoody]

Those pistons should be framed and put up on the wall! Well tastey!:smokin:

I held one phil and they are perfection.. And the block is as very serious as it looks this is Definatley a crazy machine in the right hands I personnally haven't seen something as crazy as this.. :agree:

[rs250nut]

Nice work Glen hope it works out well for you, any idea on what turbo you are using?

[Hi 5]

Nice work Glen hope it works out well for you, any idea on what turbo you are using?

Gt 42 twin scroll

[rs250nut]

Gt 42 twin scroll

Nice:)

[Hi 5]

Cylinder head all done cost a fortune big spec cams double spring ti top caps ti keepers fancy valves fancy guides and stem seals easy way to spend £3000 http://i1171.photobucket.com/albums/r548/hi5tunig/DC686B44-E2CA-4F8A-8D65-594CD0DA3848-13687-00002006123CB34F.jpg http://i1171.photobucket.com/albums/r548/hi5tunig/5BDA3794-3933-4075-8977-96680925F611-13687-000020060E49AEF4.jpg http://i1171.photobucket.com/albums/r548/hi5tunig/FE31CE0B-D0B4-4065-9EDF-2BFF833496A3-13687-00002005D4C9D58E.jpg http://i1171.photobucket.com/albums/r548/hi5tunig/8DC76EBF-870C-43A5-82E8-4AFD09C400CB-13687-000020060BF4CB54.jpg

[r5_scotty]

Cylinder head all done cost a fortune big spec cams double spring ti top caps ti keepers fancy valves fancy guides and stem seals easy way to spend £3000 http://i1171.photobucket.com/albums/r548/hi5tunig/DC686B44-E2CA-4F8A-8D65-594CD0DA3848-13687-00002006123CB34F.jpg http://i1171.photobucket.com/albums/r548/hi5tunig/5BDA3794-3933-4075-8977-96680925F611-13687-000020060E49AEF4.jpg http://i1171.photobucket.com/albums/r548/hi5tunig/FE31CE0B-D0B4-4065-9EDF-2BFF833496A3-13687-00002005D4C9D58E.jpg http://i1171.photobucket.com/albums/r548/hi5tunig/8DC76EBF-870C-43A5-82E8-4AFD09C400CB-13687-000020060BF4CB54.jpg


ouch £3000!!! bet it will be well worth it:burnrubber:

[Hi 5]

Busy busy http://i1171.photobucket.com/albums/r548/hi5tunig/7547DF06-0282-4B16-8830-3A822959F9FD-14139-000021124FA863AE.jpg

[philr5t]

looking good glen progress seem to be moving quickly in the right direction.got to ask though i know your building the lump in the kitchen but you aint just sprayed the shell in the conservatory have you :laugh:

[Hi 5]

If I could I would lol units are too cold getting old lol

[Dave Reed]

If I could I would lol units are too cold getting old lol


Getting :confused::confused::laugh::laugh:

Jokes a side, looking good mate won't be long now..

[Hi 5]

Got to get done as much before are lass drops that will **** the job up

[Dave Reed]

Lol.

Must admit I always wanted to do a big power Honda FWD car, that's why I bought the crx.. O well maybe in my next life lol

[Scoff]

It needs to go like this on first outing ;)

http://www.youtube.com/watch?v=ZKjpmf1aI14

Check the incar at 2:10 , it's something else.

[Hi 5]

It needs to go like this on first outing ;)

http://www.youtube.com/watch?v=ZKjpmf1aI14

Check the incar at 2:10 , it's something else.

mint 9.0 will do pal

[Nottswoody]

Hi glen.. Wheels fit great bud :)

What wheels and tyres will you have there's some serious slicks on the Americans civic on that clip.

[Hi 5]

Hi glen.. Wheels fit great bud :)

What wheels and tyres will you have there's some serious slicks on the Americans civic on that clip.

yep 25 or 26 in tall 9in wide

[GTphil]

It needs to go like this on first outing ;)

http://www.youtube.com/watch?v=ZKjpmf1aI14

Check the incar at 2:10 , it's something else.

That is incredible!:eek: I can't help but think he's merely just a passenger in that thing!

I wonder what sort of g's he's subjected to?

[Nottswoody]

That is incredible!:eek: I can't help but think he's merely just a passenger in that thing!

I wonder what sort of g's he's subjected to?

I like the snap to the left top en of third :) you will need a coffee before each run to make sure your awake with that beast..

[Hi 5]

I like the snap to the left top en of third :) you will need a coffee before each run to make sure your awake with that beast..

bring it on carnt wait :D:D:D:D:D:D:D:D:D:D:D:D:D:D:D

[Nottswoody]

The Americans will be watching you next year :)

[Hi 5]

Laughing no dowt thinking wot is he trying to do there the masters over there

[Dave Reed]

Laughing no dowt thinking wot is he trying to do there the masters over there


On there short/down hill tracks they are :laugh::laugh:

[Hi 5]

Some more boring photos for you mr reed http://i1171.photobucket.com/albums/r548/hi5tunig/180ABC67-94EE-4546-8C12-4D4149B80044-14838-000022352873A4CE.jpg http://i1171.photobucket.com/albums/r548/hi5tunig/B62CB2E1-8451-4293-9499-B0529C25BE76-14838-0000223517FE8D4B.jpghttp://i1171.photobucket.com/albums/r548/hi5tunig/4D90B4E1-EA59-45B9-90CE-23A40DA216D4-14838-000022351DD4C2BB.jpg

[Hi 5]

New engine mounts came today

[Hi 5]

And new pulleys http://i1171.photobucket.com/albums/r548/hi5tunig/E0AEE53C-822D-4888-961B-716A98B92D43-14838-00002237948A58B2.jpg

[Tony Walker]

nearly Built :D

[Hi 5]

nearly Built :D

Am trying very trying so people say lol

[Nottswoody]

There's no dust on you Glenn it's flying togeather what dates have you given yourself? To be running that is

[Hi 5]

There's no dust on you Glenn it's flying togeather what dates have you given yourself? To be running that is

Hopefully jan don't want to miss any meeting like I did this year

[Nottswoody]

Hopefully jan don't want to miss any meeting like I did this year

Would that be York?

[Hi 5]

Would that be York?

In jan no m62

[chris]

Fairplay good work

[Nottswoody]

In jan no m62

Aghhhhh the private road :)

[Kris M]

looks mental Glen :agree: :)

[Rob@Backyardracing]

keep it up Glen, some good progress.... meet up soon pal for a chat and catch up.... oh and if i see you put NOS near this B motor, ill slap you ;)...

[Hi 5]

keep it up Glen, some good progress.... meet up soon pal for a chat and catch up.... oh and if i see you put NOS near this B motor, ill slap you ;)...

Lol

[Hi 5]

Engines built http://i1171.photobucket.com/albums/r548/hi5tunig/7336243C-FB2C-4CA7-8623-C261E900B610-15214-00002337769D3116.jpg

[Tony Walker]

Almost looks std :D

[Hi 5]

Almost looks std :D

It must be the breathers in rocker cover that gives it away :)

[rs250nut]

**** your not hanging about, good work.

[Hi 5]

**** your not hanging about, good work.

Cars nearly painted will be done by lunch tommorrow hopefully full steam ahead

[andybond]

http://i581.photobucket.com/albums/ss260/zoom-zoomguy/23535_105248036163665_1000003540771.jpg
http://s8.postimage.org/yec95xdt1/car.jpg


:eek::cooter:

Looks like a great project.

Any estimates on what 1/4 time you will running ?

[Hi 5]

Not yet pal look good with red rocker cover wrinkle paint is good to use are lass wasn't happy when I put cover in oven for. 1 hour to bake it on lol

[Tony Walker]

Not yet pal look good with red rocker cover wrinkle paint is good to use are lass wasn't happy when I put cover in oven for. 1 hour to bake it on lol

:D wrinkle paints the new matt black..... looks ace :agree:

[Hi 5]

:D wrinkle paints the new matt black..... looks ace :agree:

Thinking of doing boost hose in it

[andybond]

I flipping love wrinkle paint. Might paint the whole car in it. Wont look any worse than it currently does !

[Tony Walker]

I flipping love wrinkle paint. Might paint the whole car in it. Wont look any worse than it currently does !

:agree: mines flat pink so maybe wrinkle red maybe a good alternative.

[Hi 5]

I flipping love wrinkle paint. Might paint the whole car in it. Wont look any worse than it currently does !

You will struggle getting it in the oven lol

[andybond]

Ill just nark off the wife. She gives me a right roasting sometimes ...

[Tony Walker]

Spit roasting?

[andybond]

Not that I am aware of - but I do wake up sore .

Coincidence?

[Hi 5]

All painted getting there need to do some paying work http://i1171.photobucket.com/albums/r548/hi5tunig/826C776D-A1FE-431C-8225-2E50EDC1FA70-15798-0000248708002BBF.jpg http://i1171.photobucket.com/albums/r548/hi5tunig/39D9590B-DD0F-4CD5-A2E0-6205F86F0BB0-15798-00002486FCEF1D06.jpg http://i1171.photobucket.com/albums/r548/hi5tunig/EB4979DC-CD87-40AD-909F-B53E5C452488-15798-000024870381EA5A.jpg http://i1171.photobucket.com/albums/r548/hi5tunig/D3A1485D-F30C-41C7-8313-28B909192D66-15798-000024870AF620CA.jpg http://i1171.photobucket.com/albums/r548/hi5tunig/FD3FF2BC-81FD-4738-899C-255809FB20CF-15798-000024870E7B8534.jpg

[Nottswoody]

Wow you really don't hang about Glenn.. Looking good is that a carbon boot?

[Hi 5]

Wow you really don't hang about Glenn.. Looking good is that a carbon boot?

Yes carbon boot and bonnet

[Rob@Backyardracing]

Looking Good pal :)

[Hi 5]

Looking Good pal :)

Cheers pal starting to look right now it a lot done this week been flat out before baby is born

[Brigsy]

Looks awesome :agree:

[Hi 5]

Looks awesome :agree:

Cheers pal

[Andyturbo!]

Looks mint glen! U wana paint mine lol

[Hi 5]

Looks mint glen! U wana paint mine lol

You won't want to pay my price I don't think

[Tony Walker]

Amazing work Glen. Astonishing. :agree:

[Dave Reed]

**** a duck glen, you dont mess around mate! looking fresh..

Surprised you didnt go with the wider wings they use in the states,

[Hi 5]

**** a duck glen, you dont mess around mate! looking fresh..

Surprised you didnt go with the wider wings they use in the states,

I spoke to them about wings and bumper would be 6 weeks delivery at a cost of £700 and I don't think it will fit in my garage at home with them on lol might do a smaller wheel arch over Christmas get it up and running first can all ways get some later

[r5_scotty]

my next five i get your paintin it glen :D top job mate !! you`ve worked hard:agree:

[Hi 5]

Done a little more today new front lip spoiler and rear anti drag bumper http://i1171.photobucket.com/albums/r548/hi5tunig/22D0338F-ABAB-4712-B4AB-E31D75289512-16392-000025A99116C078.jpg http://i1171.photobucket.com/albums/r548/hi5tunig/AD422A27-B455-42B2-A643-7E8C70567288-16392-000025A98DE5FC70.jpg http://i1171.photobucket.com/albums/r548/hi5tunig/E89C34F1-9007-419C-9683-B47AF44377A9-16392-000025A984F37396.jpg http://i1171.photobucket.com/albums/r548/hi5tunig/0E2CCF3A-877C-4F85-A5F3-019BA903D567-16392-000025A98A5A2189.jpg

[rs250nut]

You have done more in three weeks than I have done to mine in the last three years. What weight are you building it to?

[Hi 5]

You have done more in three weeks than I have done to mine in the last three years. What weight are you building it to?

Pull your finger out then only joking you don't go fast taking your time no idear on weight I need to lose some never mind car I would love for car to be 800kilos or a bit less I will find out on first weigh in at pod

[Nottswoody]

Pull your finger out then only joking you don't go fast taking your time no idear on weight I need to lose some never mind car I would love for car to be 800kilos or a bit less I will find out on first weigh in at pod

If you need a skinny pilot I'm yer man :)

[Hi 5]

Been on with a little more today parcels turning up every day just like Christmas throttle body and oil breathers for block coming together

[Hi 5]

http://i1171.photobucket.com/albums/r548/hi5tunig/A4F2D554-06C8-47FA-A1A4-B1F8DCF600DF-18121-000029D094F12EAF.jpg http://i1171.photobucket.com/albums/r548/hi5tunig/03A354A5-6BF3-4BF9-81ED-80B28485D5C1-18121-000029D08C6F732C.jpg http://i1171.photobucket.com/albums/r548/hi5tunig/36A209B8-3C7D-4C13-9C2C-277A6E795535-18121-000029D091D2DCEB.jpg

[Hi 5]

And before there's any comments about the sofa it's the dogs not ours

[Nottswoody]

Great progress bud... Coming on nicely :agree:

[BILLY-R5GTT]

:agree: Big thumbs up from me. Looks awsome :eek: Good work :)

[Scoff]

I bet you suck those brass nipples when no ones watching ;) :cooter:

[Dave Reed]

You could of painted the vtech yoooooo solenoid :cooter:

Looking sexy as now, can't wait for some vids! Let me know the first outing matey, I'll be there...

[Hi 5]

I bet you suck those brass nipples when no ones watching ;) :cooter:

Every night helps me sleep

[Hi 5]

You could of painted the vtech yoooooo solenoid :cooter:

Looking sexy as now, can't wait for some vids! Let me know the first outing matey, I'll be there...

Ou mean like this http://i1171.photobucket.com/albums/r548/hi5tunig/4A8E6231-0208-4676-ADF3-136B7C8DEB6F-18554-00002AE13E0A2160.jpg

[Dave Reed]

That's cheating, it's a cover!! I bet you've got some of them gay socks for the M/C too :laugh:

[Hi 5]

That's cheating, it's a cover!! I bet you've got some of them gay socks for the M/C too :laugh:

And t shirt hat gloves etc Alamo

[Dave Reed]

lol.

Let me know when your out, I'll defo want to come watch... Also, just incase the power scares you and you need a driver :laugh:

[Hi 5]

lol.

Let me know when your out, I'll defo want to come watch... Also, just incase the power scares you and you need a driver :laugh:

I will let you know pal

[r5_scotty]

lol.

Let me know when your out, I'll defo want to come watch... Also, just incase the power scares you and you need a driver :laugh:


hahaha:laugh::agree:

[Hi 5]

Been out side again today freezing my arse of getting the dash board back in nightmare with the cage http://i1171.photobucket.com/albums/r548/hi5tunig/1623CFDA-902B-4909-9F7E-DD58684FEFA6-19457-00002D321620AD8C.jpg

[James_Surridge G1 5 GTT]

:agree:A "Work of Art" WOW:agree:

[Kris M]

Top work Glen :agree:

[andybond]

Glenn , any reason for putting a full dash back in ? Is it for some regulations ?

[Hi 5]

Glenn , any reason for putting a full dash back in ? Is it for some regulations ?

Yes it is but I did cut away all the back of it halfed the weight and does look better in. some were to hide a lot of wiring aswell

[Matt@CodeRedMotorsports]

Hehehe!
Only mucking about Glen, good stuff going on with that build.

[Hi 5]

Hehehe!
Only mucking about Glen, good stuff going on with that build.

new shape weigh to much and dont have a gt42 strapped to it:D:D:D:D:D:D:D

[Hi 5]

just for you mr reed bought this for baby



http://www.ebay.co.uk/itm/Dads-VTEC-Goes-Funny-Baby-Grow-HONDA-CIVIC-INTEGRA-JDM-B18-B16-SPOON-/170952819123?pt=UK_Baby_Girls&hash=item27cd9501b3

[Dave Reed]

just for you mr reed bought this for baby



http://www.ebay.co.uk/itm/Dads-VTEC-Goes-Funny-Baby-Grow-HONDA-CIVIC-INTEGRA-JDM-B18-B16-SPOON-/170952819123?pt=UK_Baby_Girls&hash=item27cd9501b3

Hahahaha awesome mate..

Train em whilst their young :D

[Hi 5]

Getting better with wrinkle paint new oil catch tank http://i1171.photobucket.com/albums/r548/hi5tunig/F13D6C0D-6C3C-4B21-A608-98782D86BE37-946-0000035FE6BF5F09.jpg

[Hi 5]

Got car at work to day and got busy

[Hi 5]

http://i1171.photobucket.com/albums/r548/hi5tunig/07D192A8-7C90-455D-B61C-03D629025913-4435-00000BF420015D6B.jpg. http://i1171.photobucket.com/albums/r548/hi5tunig/AF9388FB-3E7B-4FA6-8798-BBF4B115DE0E-4435-00000BF41C0B2791.jpg. http://i1171.photobucket.com/albums/r548/hi5tunig/57B76A08-4871-4613-A21B-B4DFBC07D1CE-4435-00000BF416F73720.jpg

[J8TRO]

That looks cracking mate! :agree:

[James5]

As always Superb quality and amazing build:agree:

[Nottswoody]

I think we made the right choice in Ronals bud for both of us :) has the turbo arrived yet? Or the new born?

[Hi 5]

I think we made the right choice in Ronals bud for both of us :) has the turbo arrived yet? Or the new born?

still waiting for both :scared:

[GT Josh]

Nice mate. ;)

[Hi 5]

http://i1171.photobucket.com/albums/r548/hi5tunig/FC8C55C9-8A7F-43DF-B9A3-627FC30F214D-5211-00000E34CA776BA0.jpg. http://i1171.photobucket.com/albums/r548/hi5tunig/6F2A06FA-F9DE-4E13-BFF4-684AC7553EA3-5211-00000E34BEE8BEFE.jpg. http://i1171.photobucket.com/albums/r548/hi5tunig/2433F81E-E4B5-43E8-BE39-69F584E05A92-5211-00000E34BA37652F.jpg

[Hi 5]

Got a little more done today

[gtmatt]

Nice work Glenn as always,loads of aem goodies ,I'm off to the state's next month with work picking up an afr gauge from aem dealer

[steveT2]

Looking :cool: Glenn,wanna come an fit my turbo kit for me,had it a month now,and the only thing I've fitted is the fuel pump lol.:sad2:

Am I gonna see this down at York dragway at some point?

[Hi 5]

Looking :cool: Glenn,wanna come an fit my turbo kit for me,had it a month now,and the only thing I've fitted is the fuel pump lol.:sad2:

Am I gonna see this down at York dragway at some point?

If you want to drop it of I will do it no problem and York I should be able to spin the full quarter I think no 11s full length lol

[steveT2]

Will keep it in mind:agree:it's time that's my prob,working 7 days a week:sad2:

Haha I can only imagine:devil::devil:gotta say though,the Honda engines sound awesome when on boost,that's one of the reasons I ditched the s/c.

[Hi 5]

Will keep it in mind:agree:it's time that's my prob,working 7 days a week:sad2:

Haha I can only imagine:devil::devil:gotta say though,the Honda engines sound awesome when on boost,that's one of the reasons I ditched the s/c.

42 at 3 bar should sound ace

[Hi 5]

http://i1171.photobucket.com/albums/r548/hi5tunig/7F222C44-948F-4D94-9814-DCF4023EFF3D-6940-000011707360AC1F.jpg. http://i1171.photobucket.com/albums/r548/hi5tunig/8E0B7FB8-A5CF-4110-B385-9B788C6B638C-6940-000011706F8B8533.jpg. http://i1171.photobucket.com/albums/r548/hi5tunig/D3475B1D-C2D0-4448-8864-E64F2E944ADF-6940-0000117069A85EA5.jpg

[Hi 5]

Got all coilovwr on today as well as a load of piping done

[Tony Walker]

Do you have a target date for finishing? Progress is impressive :agree:

[Hi 5]

Do you have a target date for finishing? Progress is impressive :agree:

Want it running on base map in jan

[Tony Walker]

Some running vids/specs pretty soon then :D

[Hi 5]

Some running vids/specs pretty soon then :D

Hopefully things are on track at the moment so fingers crossed

[GT Josh]

Nice one Glenn. Ring you next week about da boost :agree:

[Hi 5]

Nice one Glenn. Ring you next week about da boost :agree:

No problem pal

[Alex]

You certainly don't hang around do you! :D

How come you put the battery down by the front bumper?

[Bigfoot]

Looking great, cant believe how fast this has come together.

Battery at front to help put some weight at the front of the car to keep the wheels down.

[Hi 5]

Looking great, cant believe how fast this has come together.

Battery at front to help put some weight at the front of the car to keep the wheels down.

Correct fuel pumps and swirl pot will be going at the other side plus makes engine bay look a lot neater

[gttjames]

loving this, pure car porn

[Hi 5]

loving this, pure car porn

It's the only porn I see any more

[Hi 5]

One or two more pictures for you getting there front bumper is going to be fun to refit lol

[Hi 5]

http://i1171.photobucket.com/albums/r548/hi5tunig/1464AD75-FF2E-48B1-963A-D5996C58F141-8862-00001645505B4448.jpg. http://i1171.photobucket.com/albums/r548/hi5tunig/B5B896AB-9CE3-4CB8-83F4-EAA224919123-8862-000016454D282039.jpg. http://i1171.photobucket.com/albums/r548/hi5tunig/2F7B9C59-8973-4529-9260-F88E4A3A35D6-8862-0000164547A83380.jpg. http://i1171.photobucket.com/albums/r548/hi5tunig/C5760A75-2C92-4C49-9247-D2B62582C557-8862-000016455338D57A.jpg

[r5_scotty]

**** me !!!! :eek: biggg booooosssttttt:agree:

[Hi 5]

Tracktion bars came from states today ace http://i1171.photobucket.com/albums/r548/hi5tunig/B8ED9175-6DC8-45F9-8825-69ECCE43C950-9259-0000172442B9117D.jpg

[Brigsy]

Turbo looks a bit naughty :D are you running with no filter like the yanks?

[Hi 5]

Turbo looks a bit naughty :D are you running with no filter like the yanks?

At pod I will be but York I will needing large filter

[mike r5 gtt]

holy s**t :eek: is the plan to just sit on the line and suck the finishing line towards you along with the timing boards, and anything else within a mile or two!!

car looks brilliant mate and cracking on at a fair pace :agree::agree:

[Hi 5]

holy s**t :eek: is the plan to just sit on the line and suck the finishing line towards you along with the timing boards, and anything else within a mile or two!!

car looks brilliant mate and cracking on at a fair pace :agree::agree:

Cheers pal am trying my best carnt wait to hear it run

[Hi 5]

Getting a bit closer now http://i1171.photobucket.com/albums/r548/hi5tunig/DA9FEEB2-EF2D-40CA-9BFD-D8955C2C621F-12320-00001ED366644C17.jpg. http://i1171.photobucket.com/albums/r548/hi5tunig/A3E9247D-8537-42C1-805B-BE9A0C8B39B2-12320-00001ED362B138EA.jpg. http://i1171.photobucket.com/albums/r548/hi5tunig/90C225BA-3C57-49EB-8810-7F9E0411FBE7-12320-00001ED35BAE91BA.jpg

[Woznaldo]

Looking good Glenn. :cool:

You don't hang about with these builds! :eek:

[Hi 5]

Looking good Glenn. :cool:

You don't hang about with these builds! :eek:

Cheers would like it running in jan if possible happy know I know where everything is going under bonnet

[Nottswoody]

Great work Glenn will you get the standard front bumper back on? Iv seen on all those yank civic the bumpers look massive..

[Nottswoody]

Cheers pal am trying my best carnt wait to hear it run

Have you got a good hd camera? We need to see and hear this running. Although I'm Definatley coming to see this run at pod.

[Hi 5]

Great work Glenn will you get the standard front bumper back on? Iv seen on all those yank civic the bumpers look massive..

I think I should be able to do something with bumper price one up from states £600 for bumper and wings but £600 shipping and then import and 6-8 weeks delivery

[Hi 5]

Bumper being a little harder than I thought but will get there in the end http://i1171.photobucket.com/albums/r548/hi5tunig/0EF575A0-98A4-48EB-8454-86A16FC15B33-224-0000001E10D20700.jpg

[Big Steve - Raider]

Blink & you'd miss that intercooler! :laugh:

[Tony Walker]

not really a bumper anymore :D

[Hi 5]

not really a bumper anymore :D

Even less bumper when turbo is back on

[Nottswoody]

Well mr officer..let me tell you a Funny story about the bumper but only if you can catch me :burnrubber:

[Hi 5]

Injectors turned up today look pretty and been on with making drag wing as well http://i1171.photobucket.com/albums/r548/hi5tunig/314B24D7-321B-44EF-A631-F9EC505EB1FE-1779-000003FF4AB046A7.jpg. http://i1171.photobucket.com/albums/r548/hi5tunig/25627E7C-C51A-418D-905E-A87D216E9651-1779-000003FF50E6EAFC.jpg

[Hi 5]

Finished drag wing today really happy with it http://i1171.photobucket.com/albums/r548/hi5tunig/772E0316-2643-447D-BD4D-517FADE98876-3400-00000837B33AAA90.jpg. http://i1171.photobucket.com/albums/r548/hi5tunig/0875566B-3713-46CC-88FA-D493971B8EE7-3400-00000837ADDE7CD5.jpg

[TrixNFlix]

Wing looks ace! :agree:

[Big Steve - Raider]

Got a touch of Cosworth now! Ace :niceone:

[Hi 5]

The correct turbo arrived today only 4 months to arrive http://i1171.photobucket.com/albums/r548/hi5tunig/00CCAA07-DB91-4534-92A8-62D282CBCE3C-4391-00000A72A2679EBB.jpg

[Nottswoody]

:eek: as the yanks say awesome :)

[LYNCHSTAR]

jesus glenn that thing looks like it would boost you into space.:)

[Nottswoody]

I want to know were you got the mini fags and lighter form as I need to cut down :)

[Hi 5]

jesus glenn that thing looks like it would boost you into space.:)

To infinity and beyond lol

[Tutuur]

what turbo is it? and twin scroll?

love what you're doing with the jap-crap Glenn!

really digging those small radiators used on Honda's though! must have the internal heat transfer sorted out pretty good on those engines!

[Hi 5]

what turbo is it? and twin scroll?

love what you're doing with the jap-crap Glenn!

really digging those small radiators used on Honda's though! must have the internal heat transfer sorted out pretty good on those engines!

Gt4202Rs twin scroll

[Hi 5]

Looks good underneath as well http://i1171.photobucket.com/albums/r548/hi5tunig/6F15C103-2344-48FF-AF25-CF9219D9449E-5116-00000C34118BC2BE.jpg

[Tutuur]

i think i have just wet my pants :eek:

[5teve L]

i think i have just wet my pants :eek:

Where's the 'like' button haha :agree:

[rs250nut]

Gt4202Rs twin scroll

Nice turbo, is this the 74mm in 102mm ex comp wheel puppy?

[Hi 5]

Nice turbo, is this the 74mm in 102mm ex comp wheel puppy?

Oh yes indeed you need to be pushing on with yours am hoping to send mine for ecu and base map this coming week

[GTphil]

To infinity and beyond lol

It's looking like you won't have time to utter the imortal words at this rate! You will be to busy keeping the thing going in a straight line. Every picture just keeps on getting better and better:smokin:

[Hi 5]

Made screemers up today and started making exhaust front bumper looking harder by the day lol

[Hi 5]

http://i1171.photobucket.com/albums/r548/hi5tunig/B9D685BE-0E53-44C0-A473-4EA8631567E3-6170-00000E8EE3C7DA21.jpg. http://i1171.photobucket.com/albums/r548/hi5tunig/13FF3AD6-FA01-4A62-A328-837040EDB33E-6170-00000E8EE92CA15F.jpg. http://i1171.photobucket.com/albums/r548/hi5tunig/C7F17729-A8AE-44F7-BD71-A3F996BCB6CD-6170-00000E8EEC69F95F.jpg

[clee]

FFS :devil:

[Nottswoody]

I really really really really really can't wait to hear this puppy :) it's going to be mental god knows what people will think seeing that on the road.. Great effort glen and co.. How's the new boy settling in?

[Hi 5]

I really really really really really can't wait to hear this puppy :) it's going to be mental god knows what people will think seeing that on the road.. Great effort glen and co.. How's the new boy settling in?

Yes is ace no problem at all hence for the car being done

[Dafydd52]

looking sweet dude!

[Tony Walker]

Incredible.... just what paternity leave should be for :D Cant believe how quickly your progressing.

[Hi 5]

Incredible.... just what paternity leave should be for :D Cant believe how quickly your progressing.

I wish I work for myself no time of 4 kids now and lost my staff member are lass :crap:

[Tony Walker]

I wish I work for myself no time of 4 kids now and lost my staff member are lass :crap:

doh similar for me i done 1 day on 1 day off for a month or so rather than weeks off.

[Hi 5]

Am hoping to hear car running by end of month with a base map then I can run it in hopefully done it right time will tell

[Hi 5]

Cars at scoffs getting ecu and wiring loom made a front bumper to fit intercooler and turbo behind and this is how it's turning out so far

[Hi 5]

http://i1171.photobucket.com/albums/r548/hi5tunig/43FFD76C-9B4E-4918-81B1-0A724354D6D6-6137-00000F2A72284C19.jpg. http://i1171.photobucket.com/albums/r548/hi5tunig/E364B2F5-FB0E-4F7F-9E4B-D079D847D993-6137-00000F2A6EA4F7EB.jpg. http://i1171.photobucket.com/albums/r548/hi5tunig/5767A12E-2A19-4A14-96A9-884ACA729B62-6137-00000F2A6B633423.jpg. http://i1171.photobucket.com/albums/r548/hi5tunig/B3A5127D-FF22-403D-AA0D-FC60F5E98708-6137-00000F2A64FC62EF.jpg

[Nottswoody]

Great stuff glen :agree: this has come such along way and in great time too.. Had the scoff checked his straps and rollers? I cant wait to hear it at full chat :cool: are you doing the pageant of power at pod?

[Hi 5]

Great stuff glen :agree: this has come such along way and in great time too.. Had the scoff checked his straps and rollers? I cant wait to hear it at full chat :cool: are you doing the pageant of power at pod?

Base map first then should be a couple of weeks for power map and not heard about pagent of power pal

[Nottswoody]

Sorry peak performance on the 29th march at pod..

[Hi 5]

Sorry peak performance on the 29th march at pod..

Hopefully :)

[gttjames]

wow - and yer in such a short time, makes me feel useless compared to your work. Cant wait to see this in action

[Dave Reed]

That's a definite Vtech yoooooo front bumber :D

[Hi 5]

That's a definite Vtech yoooooo front bumber :D

It's should look a little better when I finish it this week pal

[Hi 5]

Car should be running at weekend cant wait for it been out in Alex's f7pt **** me it's fast gtboi :D

[Robbo]

bumper looks mint ;)

[Hi 5]

bumper looks mint ;)

Looks alright for a bit of alloy thanks pal

[Scoff]

Here's how I imagine Glenn's running in to go next week:
http://www.youtube.com/watch?v=5QqRUR0W5lk

;)

[Hi 5]

Here's how I imagine Glenn's running in to go next week:
http://www.youtube.com/watch?v=5QqRUR0W5lk

;)

Oh yes chuckle chuckle lol

[Nottswoody]

Here's how I imagine Glenn's running in to go next week:
http://www.youtube.com/watch?v=5QqRUR0W5lk

;)

Good times ahead I think a few people are going tobe shocked when this comes out.. Great stuff.. Isit going tobe stret legal Glenn or just track?

[Hi 5]

Good times ahead I think a few people are going tobe shocked when this comes out.. Great stuff.. Isit going tobe stret legal Glenn or just track?

Road legal pal

[GT Josh]

:coffee::laugh::laugh:

Glen what day you sorting base map out

[Hi 5]

:coffee::laugh::laugh:

Glen what day you sorting base map out

Not sure up to scoff

[Hi 5]

http://www.youtube.com/watch?v=XvpJb3vq8bY
it runs

[Matt@CodeRedMotorsports]

You will have to keep small children away from the front of that car...:laugh:
Good work.

[Nottswoody]

Great stuff glen.. How much was your arse twitching turning the key? I'm dredding starting mine up for the first time.. I know the c1j is easy for some guys but iv never done one.. Gret effort.. So what's the plans?

[GT Josh]

Oushhhhhhhhhhh are you mapping it tonight??

[turbo ted]

proper job glenn now get that turbo spining:D

[Tony Walker]

So close.......:agree:

[rs250nut]

Nice work bud, get the full throttle up the dualy videos loaded up:agree:

[Hi 5]

Base map is now done wiring loom a work of art thanks to scoff going to pick it up tommorrow and get it run in then we can have some boost thanks for all the comments I can't wait to drive it lol

[Hi 5]

Oushhhhhhhhhhh are you mapping it tonight??

I wasn't there when scoff did base map but I will let you no when it gets mapped for power

[Nottswoody]

Base map is now done wiring loom a work of art thanks to scoff going to pick it up tommorrow and get it run in then we can have some boost thanks for all the comments I can't wait to drive it lol

Softly softly for a while :) it will be worth it :agree:

[Hi 5]

Softly softly for a while :) it will be worth it :agree:

Not for that long 500 miles will do

[Nottswoody]

Not for that long 500 miles will do

That'll be done tomorrow then :)

[Hi 5]

No be a few weeks need to earn some money first

[Hi 5]

Bumper looks a bit better now http://i1171.photobucket.com/albums/r548/hi5tunig/4EEA9876-3270-4366-9CE9-AB47EFA2C777-1795-000003BAFCD4CF67.jpg

[Hi 5]

Picked car up from scoffs drives nice solid mounts vide rate throught car a bit but very punchy don't now what power it is but feel good to drive on round time to get some miles init clutch feels not to dad changers gear faster than clutch in. 5 so so far so good thanks to scoff as normal wiring loom is like factory to be fare you can't see it can't wait for some boost

[Hi 5]

http://i1171.photobucket.com/albums/r548/hi5tunig/15A1B19D-D106-4B98-8313-F938F4DF75E9-1940-000004668C46ECF1.jpg. Bumper has turned out ok

[andybond]

Has it got a base map then Glenn while you run it in , then a GIVE IT DEATH map will be issued at a later date ?

[Hi 5]

Has it got a base map then Glenn while you run it in , then a GIVE IT DEATH map will be issued at a later date ?

Yes sum thing like that still think it made over 200bhp at 4500 no boost and no vtec scoff will correct me if am wrong

[Nottswoody]

Well done to all envolved.. That bumpers growing on me :) it one of those crazy sleepers that people are going to look at then once it fires up suddenly people will think twice..

[Hi 5]

Well done to all envolved.. That bumpers growing on me :) it one of those crazy sleepers that people are going to look at then once it fires up suddenly people think twice..

To all. there's only two

[Nottswoody]

To all. there's only two

I ment the mrs and kids for missing dad for hrs and days watching you build a monster bud..

[Hi 5]

I ment the mrs and kids for missing dad for hrs and days watching you build a monster bud..

Lol they are glad to get rid only Harrison misses but he came out tonight in car he loves it . He says it needs more boost its not holding him the seat hard enough

[TNT ANDY]

I assume that you got the sump sorted, did you end up moving the down pipe slightly?

[Hi 5]

I assume that you got the sump sorted, did you end up moving the down pipe slightly?

Yes new sump gasket genuine one spoke to one of the lads at Honda said did you use sealant which I did he said that's why it split gasket so fit new one with no sealant happy days so far

[TNT ANDY]

Yes new sump gasket genuine one spoke to one of the lads at Honda said did you use sealant which I did he said that's why it split gasket so fit new one with no sealant happy days so far

:agree::agree::agree:

[Dave Reed]

Well done mate! Actually now that bumper is fitted it look gd, you should try putting some ally air defectors in the I side so the airbus forced through the I/c..

Can't wait for the rolling road vids at full chat n ill defo be at pod when u run for the 1st time ;)

[Hi 5]

Well done mate! Actually now that bumper is fitted it look gd, you should try putting some ally air defectors in the I side so the airbus forced through the I/c..

Can't wait for the rolling road vids at full chat n ill defo be at pod when u run for the 1st time ;)

I see pal good idear will have a look at doing that when I get two min thanks

[Tony Walker]

Well done mate! Actually now that bumper is fitted it look gd, you should try putting some ally air defectors in the I side so the airbus forced through the I/c..

Can't wait for the rolling road vids at full chat n ill defo be at pod when u run for the 1st time ;)


:D:agree: cowling on my rad really made a difference on track with coolant temps so should imagine forcing it through the IC and not just pushing over/under around would work much better :agree:

[Hi 5]

:D:agree: cowling on my rad really made a difference on track with coolant temps so should imagine forcing it through the IC and not just pushing over/under around would work much better :agree:

Some of the cars in the states don't use coolers at all :D

[Tony Walker]

i suppose 6-7 seconds of cold air doesnt do alot? then again more power the faster you go surely must be some benefit? or are they thinking the extra lag isnt worth it?

[Hi 5]

i suppose 6-7 seconds of cold air doesnt do alot? then again more power the faster you go surely must be some benefit? or are they thinking the extra lag isnt worth it?

Chris millers car has no cooler at all straight in inlet from turbo

[GTphil]

That goes against the train of thought that the cooler the air the denser it is, again tho like Tony says, if the blowers pushing 4bar+ then i don't suppose it matters.:D

I'm still quite shocked finding out that Chris miller doesn't use a cooler at all:laugh::scratch:

[Tony Walker]

does the turbo get chance to get hot in the few seconds? do they measure charge temps?

[Hi 5]

does the turbo get chance to get hot in the few seconds? do they measure charge temps?

I would of thought so 8.0@188 mph

[Woznaldo]

Chris millers car has no cooler at all straight in inlet from turbo

What fuel does he run Glenn? I'm guessing methanol?

[Hi 5]

What fuel does he run Glenn? I'm guessing methanol?

Yes e85

[Dave Reed]

Yes e85

That'll be y then ;)

[Scoff]

i suppose 6-7 seconds of cold air doesnt do alot? then again more power the faster you go surely must be some benefit? or are they thinking the extra lag isnt worth it?

With E85, methanol or Q16 there is a lot more fuel going in, so cooling the air is less important.

[GTphil]

The voices of reason! I really couldn't get my head around no cooler:wasntme:

[Hi 5]

Cars run in now just waiting to find out when mad scientist can work his magic :D

[Hi 5]

YouTube vid up http://m.youtube.com/watch?v=j1y2wc09jYQ